[net-next,v5,00/15] ACPI support for dpaa2 driver
mbox series

Message ID 20210208151244.16338-1-calvin.johnson@oss.nxp.com
Headers show
Series
  • ACPI support for dpaa2 driver
Related show

Message

Calvin Johnson Feb. 8, 2021, 3:12 p.m. UTC
This patch set provides ACPI support to DPAA2 network drivers.

It also introduces new fwnode based APIs to support phylink and phy
layers
    Following functions are defined:
      phylink_fwnode_phy_connect()
      fwnode_mdiobus_register_phy()
      fwnode_mdiobus_register()
      fwnode_get_phy_id()
      fwnode_phy_find_device()
      device_phy_find_device()
      fwnode_get_phy_node()
      fwnode_mdio_find_device()
      acpi_get_local_address()

    First one helps in connecting phy to phylink instance.
    Next three helps in getting phy_id and registering phy to mdiobus
    Next two help in finding a phy on a mdiobus.
    Next one helps in getting phy_node from a fwnode.
    Last one is used to get local address from _ADR object.

    Corresponding OF functions are refactored.

Tested-on: T2080RDB, LS1046ARDB, LS2088ARDB and LX2160ARDB


Changes in v5:
- More cleanup
- Replace fwnode_get_id() with acpi_get_local_address()
- add missing MODULE_LICENSE()
- replace fwnode_get_id() with OF and ACPI function calls
- replace fwnode_get_id() with OF and ACPI function calls

Changes in v4:
- More cleanup
- Improve code structure to handle all cases
- Remove redundant else from fwnode_mdiobus_register()
- Cleanup xgmac_mdio_probe()
- call phy_device_free() before returning

Changes in v3:
- Add more info on legacy DT properties "phy" and "phy-device"
- Redefine fwnode_phy_find_device() to follow of_phy_find_device()
- Use traditional comparison pattern
- Use GENMASK
- Modified to retrieve reg property value for ACPI as well
- Resolved compilation issue with CONFIG_ACPI = n
- Added more info into documentation
- Use acpi_mdiobus_register()
- Avoid unnecessary line removal
- Remove unused inclusion of acpi.h

Changes in v2:
- Updated with more description in document
- use reverse christmas tree ordering for local variables
- Refactor OF functions to use fwnode functions

Calvin Johnson (15):
  Documentation: ACPI: DSD: Document MDIO PHY
  net: phy: Introduce fwnode_mdio_find_device()
  net: phy: Introduce phy related fwnode functions
  of: mdio: Refactor of_phy_find_device()
  net: phy: Introduce fwnode_get_phy_id()
  of: mdio: Refactor of_get_phy_id()
  net: mdiobus: Introduce fwnode_mdiobus_register_phy()
  of: mdio: Refactor of_mdiobus_register_phy()
  ACPI: utils: Introduce acpi_get_local_address()
  net: mdio: Add ACPI support code for mdio
  net: mdiobus: Introduce fwnode_mdiobus_register()
  net/fsl: Use fwnode_mdiobus_register()
  phylink: introduce phylink_fwnode_phy_connect()
  net: phylink: Refactor phylink_of_phy_connect()
  net: dpaa2-mac: Add ACPI support for DPAA2 MAC driver

 Documentation/firmware-guide/acpi/dsd/phy.rst | 133 ++++++++++++++++++
 MAINTAINERS                                   |   1 +
 drivers/acpi/utils.c                          |  14 ++
 .../net/ethernet/freescale/dpaa2/dpaa2-mac.c  |  91 +++++++-----
 drivers/net/ethernet/freescale/xgmac_mdio.c   |  11 +-
 drivers/net/mdio/Kconfig                      |   7 +
 drivers/net/mdio/Makefile                     |   1 +
 drivers/net/mdio/acpi_mdio.c                  |  51 +++++++
 drivers/net/mdio/of_mdio.c                    |  79 +----------
 drivers/net/phy/mdio_bus.c                    |  86 +++++++++++
 drivers/net/phy/phy_device.c                  | 106 ++++++++++++++
 drivers/net/phy/phylink.c                     |  53 ++++---
 include/linux/acpi.h                          |   7 +
 include/linux/acpi_mdio.h                     |  27 ++++
 include/linux/mdio.h                          |   2 +
 include/linux/of_mdio.h                       |   6 +-
 include/linux/phy.h                           |  32 +++++
 include/linux/phylink.h                       |   3 +
 18 files changed, 578 insertions(+), 132 deletions(-)
 create mode 100644 Documentation/firmware-guide/acpi/dsd/phy.rst
 create mode 100644 drivers/net/mdio/acpi_mdio.c
 create mode 100644 include/linux/acpi_mdio.h