From: Marcel Ziswiler <marcel@ziswiler.com>
To: devicetree@vger.kernel.org, linux-tegra@vger.kernel.org,
linux-kernel@vger.kernel.org
Cc: Russell King - ARM Linux <linux@armlinux.org.uk>,
Mark Brown <broonie@kernel.org>,
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>,
Marcel Ziswiler <marcel.ziswiler@toradex.com>,
Thierry Reding <thierry.reding@gmail.com>,
Jonathan Hunter <jonathanh@nvidia.com>,
Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>
Subject: [PATCH v2 2/9] ARM: tegra: apalis-tk1/colibri_t20/t30: eval/iris: fix regulator gpio enable
Date: Tue, 16 Oct 2018 12:47:23 +0200 [thread overview]
Message-ID: <20181016104730.4598-3-marcel@ziswiler.com> (raw)
In-Reply-To: <20181016104730.4598-1-marcel@ziswiler.com>
From: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Anything other than the default active-low would require the separate
property enable-active-high to be set. This gets rid of the following
warning during boot:
regulator-usbh-vbus GPIO handle specifies active low - ignored
resp.:
regulator-1v05-avdd-hdmi-pll GPIO handle specifies active low - ignored
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
---
Changes in v2: None
Changes in v1: None
arch/arm/boot/dts/tegra124-apalis-v1.2.dtsi | 2 +-
arch/arm/boot/dts/tegra124-apalis.dtsi | 2 +-
arch/arm/boot/dts/tegra20-colibri-eval-v3.dts | 2 +-
arch/arm/boot/dts/tegra20-colibri-iris.dts | 2 +-
arch/arm/boot/dts/tegra30-colibri-eval-v3.dts | 2 +-
5 files changed, 5 insertions(+), 5 deletions(-)
diff --git a/arch/arm/boot/dts/tegra124-apalis-v1.2.dtsi b/arch/arm/boot/dts/tegra124-apalis-v1.2.dtsi
index 367eb8c86098..73a8e117a9b9 100644
--- a/arch/arm/boot/dts/tegra124-apalis-v1.2.dtsi
+++ b/arch/arm/boot/dts/tegra124-apalis-v1.2.dtsi
@@ -1948,7 +1948,7 @@
regulator-name = "+V1.05_AVDD_HDMI_PLL";
regulator-min-microvolt = <1050000>;
regulator-max-microvolt = <1050000>;
- gpio = <&gpio TEGRA_GPIO(H, 7) GPIO_ACTIVE_LOW>;
+ gpio = <&gpio TEGRA_GPIO(H, 7) GPIO_ACTIVE_HIGH>;
vin-supply = <®_1v05_vdd>;
};
diff --git a/arch/arm/boot/dts/tegra124-apalis.dtsi b/arch/arm/boot/dts/tegra124-apalis.dtsi
index 13c93cd507d8..3e3b347afe56 100644
--- a/arch/arm/boot/dts/tegra124-apalis.dtsi
+++ b/arch/arm/boot/dts/tegra124-apalis.dtsi
@@ -1978,7 +1978,7 @@
regulator-name = "+V1.05_AVDD_HDMI_PLL";
regulator-min-microvolt = <1050000>;
regulator-max-microvolt = <1050000>;
- gpio = <&gpio TEGRA_GPIO(H, 7) GPIO_ACTIVE_LOW>;
+ gpio = <&gpio TEGRA_GPIO(H, 7) GPIO_ACTIVE_HIGH>;
vin-supply = <®_1v05_vdd>;
};
diff --git a/arch/arm/boot/dts/tegra20-colibri-eval-v3.dts b/arch/arm/boot/dts/tegra20-colibri-eval-v3.dts
index 37ad508b61d9..f1a85d930e61 100644
--- a/arch/arm/boot/dts/tegra20-colibri-eval-v3.dts
+++ b/arch/arm/boot/dts/tegra20-colibri-eval-v3.dts
@@ -256,7 +256,7 @@
regulator-name = "VCC_USB[1-4]";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_LOW>;
+ gpio = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_HIGH>;
vin-supply = <®_5v0>;
};
};
diff --git a/arch/arm/boot/dts/tegra20-colibri-iris.dts b/arch/arm/boot/dts/tegra20-colibri-iris.dts
index af4740847769..e1e5ec5253fd 100644
--- a/arch/arm/boot/dts/tegra20-colibri-iris.dts
+++ b/arch/arm/boot/dts/tegra20-colibri-iris.dts
@@ -238,7 +238,7 @@
regulator-name = "VCC_USB1";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_LOW>;
+ gpio = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_HIGH>;
vin-supply = <®_5v0>;
};
};
diff --git a/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts b/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts
index 8e106e784dce..7e6bf4cdf322 100644
--- a/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts
+++ b/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts
@@ -192,7 +192,7 @@
regulator-name = "VCC_USB[1-4]";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_LOW>;
+ gpio = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_HIGH>;
vin-supply = <®_5v0>;
};
};
--
2.14.4
next prev parent reply other threads:[~2018-10-16 10:48 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-10-16 10:47 [PATCH v2 0/9] ARM: dts: tegra: last minute fixes Marcel Ziswiler
2018-10-16 10:47 ` [PATCH v2 1/9] ARM: tegra: fix simple-panel compatibles Marcel Ziswiler
2018-10-16 10:47 ` Marcel Ziswiler [this message]
2018-10-16 10:47 ` [PATCH v2 3/9] ARM: tegra: colibri_t20: reorder pmic properties Marcel Ziswiler
2018-10-16 10:47 ` [PATCH v2 4/9] ARM: tegra: apalis-tk1: further regulator clean-up Marcel Ziswiler
2018-10-16 10:47 ` [PATCH v2 5/9] ARM: tegra: apalis_t30/tk1: annotate power I2C being on-module Marcel Ziswiler
2018-10-16 10:47 ` [PATCH v2 6/9] ARM: tegra: colibri_t30: further regulator clean-up Marcel Ziswiler
2018-10-16 10:47 ` [PATCH v2 7/9] ARM: tegra: apalis_t30: " Marcel Ziswiler
2018-10-16 10:47 ` [PATCH v2 8/9] ASoC: tegra_sgtl5000: fix device_node refcounting Marcel Ziswiler
2018-10-17 10:57 ` Jon Hunter
2018-10-16 10:47 ` [PATCH v2 9/9] ASoC: tegra_sgtl5000: fix platform name vs. of_node assignement Marcel Ziswiler
2018-10-17 12:32 ` Jon Hunter
2018-10-17 14:28 ` Marcel Ziswiler
2018-10-17 19:16 ` Mark Brown
2018-10-17 19:50 ` Jon Hunter
2018-10-17 21:33 ` Marcel Ziswiler
2018-10-16 11:58 ` [PATCH v2 0/9] ARM: dts: tegra: last minute fixes Mark Brown
2018-10-16 12:10 ` Marcel Ziswiler
2018-10-17 10:51 ` Marcel Ziswiler
2018-10-17 11:44 ` Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181016104730.4598-3-marcel@ziswiler.com \
--to=marcel@ziswiler.com \
--cc=broonie@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=jonathanh@nvidia.com \
--cc=kuninori.morimoto.gx@renesas.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-tegra@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=marcel.ziswiler@toradex.com \
--cc=mark.rutland@arm.com \
--cc=robh+dt@kernel.org \
--cc=thierry.reding@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).