linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Marcel Ziswiler <marcel@ziswiler.com>
To: devicetree@vger.kernel.org, linux-tegra@vger.kernel.org,
	linux-kernel@vger.kernel.org
Cc: Russell King - ARM Linux <linux@armlinux.org.uk>,
	Mark Brown <broonie@kernel.org>,
	Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>,
	Marcel Ziswiler <marcel.ziswiler@toradex.com>,
	Thierry Reding <thierry.reding@gmail.com>,
	Jonathan Hunter <jonathanh@nvidia.com>,
	Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>
Subject: [PATCH v2 2/9] ARM: tegra: apalis-tk1/colibri_t20/t30: eval/iris: fix regulator gpio enable
Date: Tue, 16 Oct 2018 12:47:23 +0200	[thread overview]
Message-ID: <20181016104730.4598-3-marcel@ziswiler.com> (raw)
In-Reply-To: <20181016104730.4598-1-marcel@ziswiler.com>

From: Marcel Ziswiler <marcel.ziswiler@toradex.com>

Anything other than the default active-low would require the separate
property enable-active-high to be set. This gets rid of the following
warning during boot:

 regulator-usbh-vbus GPIO handle specifies active low - ignored

resp.:

 regulator-1v05-avdd-hdmi-pll GPIO handle specifies active low - ignored

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>

---

Changes in v2: None
Changes in v1: None

 arch/arm/boot/dts/tegra124-apalis-v1.2.dtsi   | 2 +-
 arch/arm/boot/dts/tegra124-apalis.dtsi        | 2 +-
 arch/arm/boot/dts/tegra20-colibri-eval-v3.dts | 2 +-
 arch/arm/boot/dts/tegra20-colibri-iris.dts    | 2 +-
 arch/arm/boot/dts/tegra30-colibri-eval-v3.dts | 2 +-
 5 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/arch/arm/boot/dts/tegra124-apalis-v1.2.dtsi b/arch/arm/boot/dts/tegra124-apalis-v1.2.dtsi
index 367eb8c86098..73a8e117a9b9 100644
--- a/arch/arm/boot/dts/tegra124-apalis-v1.2.dtsi
+++ b/arch/arm/boot/dts/tegra124-apalis-v1.2.dtsi
@@ -1948,7 +1948,7 @@
 		regulator-name = "+V1.05_AVDD_HDMI_PLL";
 		regulator-min-microvolt = <1050000>;
 		regulator-max-microvolt = <1050000>;
-		gpio = <&gpio TEGRA_GPIO(H, 7) GPIO_ACTIVE_LOW>;
+		gpio = <&gpio TEGRA_GPIO(H, 7) GPIO_ACTIVE_HIGH>;
 		vin-supply = <&reg_1v05_vdd>;
 	};
 
diff --git a/arch/arm/boot/dts/tegra124-apalis.dtsi b/arch/arm/boot/dts/tegra124-apalis.dtsi
index 13c93cd507d8..3e3b347afe56 100644
--- a/arch/arm/boot/dts/tegra124-apalis.dtsi
+++ b/arch/arm/boot/dts/tegra124-apalis.dtsi
@@ -1978,7 +1978,7 @@
 		regulator-name = "+V1.05_AVDD_HDMI_PLL";
 		regulator-min-microvolt = <1050000>;
 		regulator-max-microvolt = <1050000>;
-		gpio = <&gpio TEGRA_GPIO(H, 7) GPIO_ACTIVE_LOW>;
+		gpio = <&gpio TEGRA_GPIO(H, 7) GPIO_ACTIVE_HIGH>;
 		vin-supply = <&reg_1v05_vdd>;
 	};
 
diff --git a/arch/arm/boot/dts/tegra20-colibri-eval-v3.dts b/arch/arm/boot/dts/tegra20-colibri-eval-v3.dts
index 37ad508b61d9..f1a85d930e61 100644
--- a/arch/arm/boot/dts/tegra20-colibri-eval-v3.dts
+++ b/arch/arm/boot/dts/tegra20-colibri-eval-v3.dts
@@ -256,7 +256,7 @@
 		regulator-name = "VCC_USB[1-4]";
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_LOW>;
+		gpio = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_HIGH>;
 		vin-supply = <&reg_5v0>;
 	};
 };
diff --git a/arch/arm/boot/dts/tegra20-colibri-iris.dts b/arch/arm/boot/dts/tegra20-colibri-iris.dts
index af4740847769..e1e5ec5253fd 100644
--- a/arch/arm/boot/dts/tegra20-colibri-iris.dts
+++ b/arch/arm/boot/dts/tegra20-colibri-iris.dts
@@ -238,7 +238,7 @@
 		regulator-name = "VCC_USB1";
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_LOW>;
+		gpio = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_HIGH>;
 		vin-supply = <&reg_5v0>;
 	};
 };
diff --git a/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts b/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts
index 8e106e784dce..7e6bf4cdf322 100644
--- a/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts
+++ b/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts
@@ -192,7 +192,7 @@
 		regulator-name = "VCC_USB[1-4]";
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_LOW>;
+		gpio = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_HIGH>;
 		vin-supply = <&reg_5v0>;
 	};
 };
-- 
2.14.4


  parent reply	other threads:[~2018-10-16 10:48 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-10-16 10:47 [PATCH v2 0/9] ARM: dts: tegra: last minute fixes Marcel Ziswiler
2018-10-16 10:47 ` [PATCH v2 1/9] ARM: tegra: fix simple-panel compatibles Marcel Ziswiler
2018-10-16 10:47 ` Marcel Ziswiler [this message]
2018-10-16 10:47 ` [PATCH v2 3/9] ARM: tegra: colibri_t20: reorder pmic properties Marcel Ziswiler
2018-10-16 10:47 ` [PATCH v2 4/9] ARM: tegra: apalis-tk1: further regulator clean-up Marcel Ziswiler
2018-10-16 10:47 ` [PATCH v2 5/9] ARM: tegra: apalis_t30/tk1: annotate power I2C being on-module Marcel Ziswiler
2018-10-16 10:47 ` [PATCH v2 6/9] ARM: tegra: colibri_t30: further regulator clean-up Marcel Ziswiler
2018-10-16 10:47 ` [PATCH v2 7/9] ARM: tegra: apalis_t30: " Marcel Ziswiler
2018-10-16 10:47 ` [PATCH v2 8/9] ASoC: tegra_sgtl5000: fix device_node refcounting Marcel Ziswiler
2018-10-17 10:57   ` Jon Hunter
2018-10-16 10:47 ` [PATCH v2 9/9] ASoC: tegra_sgtl5000: fix platform name vs. of_node assignement Marcel Ziswiler
2018-10-17 12:32   ` Jon Hunter
2018-10-17 14:28     ` Marcel Ziswiler
2018-10-17 19:16       ` Mark Brown
2018-10-17 19:50         ` Jon Hunter
2018-10-17 21:33         ` Marcel Ziswiler
2018-10-16 11:58 ` [PATCH v2 0/9] ARM: dts: tegra: last minute fixes Mark Brown
2018-10-16 12:10   ` Marcel Ziswiler
2018-10-17 10:51   ` Marcel Ziswiler
2018-10-17 11:44     ` Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20181016104730.4598-3-marcel@ziswiler.com \
    --to=marcel@ziswiler.com \
    --cc=broonie@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=jonathanh@nvidia.com \
    --cc=kuninori.morimoto.gx@renesas.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-tegra@vger.kernel.org \
    --cc=linux@armlinux.org.uk \
    --cc=marcel.ziswiler@toradex.com \
    --cc=mark.rutland@arm.com \
    --cc=robh+dt@kernel.org \
    --cc=thierry.reding@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).