tty: serial: qcom_geni_serial: Add suspend support to non console UART
diff mbox series

Message ID 1539696848-21988-1-git-send-email-msavaliy@codeaurora.org
State Accepted
Commit b1f84dd321667d07f08fab99d042f1e39e9ee5bb
Headers show
Series
  • tty: serial: qcom_geni_serial: Add suspend support to non console UART
Related show

Commit Message

Mukesh, Savaliya Oct. 16, 2018, 1:34 p.m. UTC
From: Mukesh Kumar Savaliya <msavaliy@codeaurora.org>

UART driver checks for the PM state and denies suspend if state is ACTIVE.
This makes UART to deny suspend when client keeps port open which is not
correct. Instead follow framework and obey suspend-resume callbacks.

Signed-off-by: Mukesh Kumar Savaliya <msavaliy@codeaurora.org>
---
 drivers/tty/serial/qcom_geni_serial.c | 36 ++++++-----------------------------
 1 file changed, 6 insertions(+), 30 deletions(-)

Comments

Doug Anderson Oct. 16, 2018, 8:14 p.m. UTC | #1
Hi,

On Tue, Oct 16, 2018 at 6:34 AM Mukesh, Savaliya
<msavaliy@codeaurora.org> wrote:
>
> From: Mukesh Kumar Savaliya <msavaliy@codeaurora.org>
>
> UART driver checks for the PM state and denies suspend if state is ACTIVE.
> This makes UART to deny suspend when client keeps port open which is not
> correct. Instead follow framework and obey suspend-resume callbacks.
>
> Signed-off-by: Mukesh Kumar Savaliya <msavaliy@codeaurora.org>
> ---
>  drivers/tty/serial/qcom_geni_serial.c | 36 ++++++-----------------------------
>  1 file changed, 6 insertions(+), 30 deletions(-)

Looks like this patch was re-sent about an hour later with a different
subject of ("tty: serial: qcom_geni_serial: Rectify UART suspend
mechanism") at <https://lkml.kernel.org/r/1539699060-3055-1-git-send-email-msavaliy@codeaurora.org>.
The subject of the later patch seems better.  I'll do my review there.

-Doug

Patch
diff mbox series

diff --git a/drivers/tty/serial/qcom_geni_serial.c b/drivers/tty/serial/qcom_geni_serial.c
index 29ec343..93598d7 100644
--- a/drivers/tty/serial/qcom_geni_serial.c
+++ b/drivers/tty/serial/qcom_geni_serial.c
@@ -1327,49 +1327,25 @@  static int qcom_geni_serial_remove(struct platform_device *pdev)
 	return 0;
 }
 
-static int __maybe_unused qcom_geni_serial_sys_suspend_noirq(struct device *dev)
+static int __maybe_unused qcom_geni_serial_sys_suspend(struct device *dev)
 {
 	struct qcom_geni_serial_port *port = dev_get_drvdata(dev);
 	struct uart_port *uport = &port->uport;
 
-	if (uart_console(uport)) {
-		uart_suspend_port(uport->private_data, uport);
-	} else {
-		struct uart_state *state = uport->state;
-		/*
-		 * If the port is open, deny system suspend.
-		 */
-		if (state->pm_state == UART_PM_STATE_ON)
-			return -EBUSY;
-	}
-
-	return 0;
+	return uart_suspend_port(uport->private_data, uport);
 }
 
-static int __maybe_unused qcom_geni_serial_sys_resume_noirq(struct device *dev)
+static int __maybe_unused qcom_geni_serial_sys_resume(struct device *dev)
 {
 	struct qcom_geni_serial_port *port = dev_get_drvdata(dev);
 	struct uart_port *uport = &port->uport;
 
-	if (uart_console(uport) &&
-			console_suspend_enabled && uport->suspended) {
-		uart_resume_port(uport->private_data, uport);
-		/*
-		 * uart_suspend_port() invokes port shutdown which in turn
-		 * frees the irq. uart_resume_port invokes port startup which
-		 * performs request_irq. The request_irq auto-enables the IRQ.
-		 * In addition, resume_noirq implicitly enables the IRQ and
-		 * leads to an unbalanced IRQ enable warning. Disable the IRQ
-		 * before returning so that the warning is suppressed.
-		 */
-		disable_irq(uport->irq);
-	}
-	return 0;
+	return uart_resume_port(uport->private_data, uport);
 }
 
 static const struct dev_pm_ops qcom_geni_serial_pm_ops = {
-	SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(qcom_geni_serial_sys_suspend_noirq,
-					qcom_geni_serial_sys_resume_noirq)
+	SET_SYSTEM_SLEEP_PM_OPS(qcom_geni_serial_sys_suspend,
+					qcom_geni_serial_sys_resume)
 };
 
 static const struct of_device_id qcom_geni_serial_match_table[] = {