From: Alexandre Belloni <alexandre.belloni@bootlin.com>
To: Stephen Boyd <sboyd@kernel.org>
Cc: Nicolas Ferre <nicolas.ferre@microchip.com>,
Michael Turquette <mturquette@baylibre.com>,
Thomas Petazzoni <thomas.petazzoni@bootlin.com>,
linux-clk@vger.kernel.org, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org,
Alexandre Belloni <alexandre.belloni@bootlin.com>
Subject: [PATCH v2 19/22] ARM: dts: at91: at91sam9261: switch to new clock bindings
Date: Tue, 16 Oct 2018 16:21:57 +0200 [thread overview]
Message-ID: <20181016142200.19741-20-alexandre.belloni@bootlin.com> (raw)
In-Reply-To: <20181016142200.19741-1-alexandre.belloni@bootlin.com>
Switch at91sam9261 boards to the new PMC clock bindings.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
---
arch/arm/boot/dts/at91sam9261.dtsi | 287 +++--------------------------
1 file changed, 23 insertions(+), 264 deletions(-)
diff --git a/arch/arm/boot/dts/at91sam9261.dtsi b/arch/arm/boot/dts/at91sam9261.dtsi
index 33f09d5ea020..01d700b63b45 100644
--- a/arch/arm/boot/dts/at91sam9261.dtsi
+++ b/arch/arm/boot/dts/at91sam9261.dtsi
@@ -75,7 +75,7 @@
compatible = "atmel,at91rm9200-ohci", "usb-ohci";
reg = <0x00500000 0x100000>;
interrupts = <20 IRQ_TYPE_LEVEL_HIGH 2>;
- clocks = <&ohci_clk>, <&hclk0>, <&uhpck>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 20>, <&pmc PMC_TYPE_SYSTEM 16>, <&pmc PMC_TYPE_SYSTEM 6>;
clock-names = "ohci_clk", "hclk", "uhpck";
status = "disabled";
};
@@ -86,7 +86,7 @@
interrupts = <21 IRQ_TYPE_LEVEL_HIGH 3>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_fb>;
- clocks = <&lcd_clk>, <&hclk1>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 21>, <&pmc PMC_TYPE_SYSTEM 17>;
clock-names = "lcdc_clk", "hclk";
status = "disabled";
};
@@ -106,7 +106,7 @@
0x5 0x0 0x60000000 0x10000000
0x6 0x0 0x70000000 0x10000000
0x7 0x0 0x80000000 0x10000000>;
- clocks = <&mck>;
+ clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
status = "disabled";
nand_controller: nand-controller {
@@ -132,7 +132,7 @@
interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>,
<18 IRQ_TYPE_LEVEL_HIGH 0>,
<19 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&tc0_clk>, <&tc1_clk>, <&tc2_clk>, <&slow_xtal>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 17>, <&pmc PMC_TYPE_PERIPHERAL 18>, <&pmc PMC_TYPE_PERIPHERAL 19>, <&slow_xtal>;
clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk";
};
@@ -140,7 +140,7 @@
compatible = "atmel,at91sam9261-udc";
reg = <0xfffa4000 0x4000>;
interrupts = <10 IRQ_TYPE_LEVEL_HIGH 2>;
- clocks = <&udc_clk>, <&udpck>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 10>, <&pmc PMC_TYPE_SYSTEM 7>;
clock-names = "pclk", "hclk";
atmel,matrix = <&matrix>;
status = "disabled";
@@ -154,7 +154,7 @@
pinctrl-0 = <&pinctrl_mmc0_clk>, <&pinctrl_mmc0_slot0_cmd_dat0>, <&pinctrl_mmc0_slot0_dat1_3>;
#address-cells = <1>;
#size-cells = <0>;
- clocks = <&mci0_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 9>;
clock-names = "mci_clk";
status = "disabled";
};
@@ -167,7 +167,7 @@
interrupts = <11 IRQ_TYPE_LEVEL_HIGH 6>;
#address-cells = <1>;
#size-cells = <0>;
- clocks = <&twi0_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 11>;
status = "disabled";
};
@@ -179,7 +179,7 @@
atmel,use-dma-tx;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usart0>;
- clocks = <&usart0_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 6>;
clock-names = "usart";
status = "disabled";
};
@@ -192,7 +192,7 @@
atmel,use-dma-tx;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usart1>;
- clocks = <&usart1_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
clock-names = "usart";
status = "disabled";
};
@@ -205,7 +205,7 @@
atmel,use-dma-tx;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usart2>;
- clocks = <&usart2_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 8>;
clock-names = "usart";
status = "disabled";
};
@@ -216,7 +216,7 @@
interrupts = <14 IRQ_TYPE_LEVEL_HIGH 5>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
- clocks = <&ssc0_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 14>;
clock-names = "pclk";
status = "disabled";
};
@@ -227,7 +227,7 @@
interrupts = <15 IRQ_TYPE_LEVEL_HIGH 5>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>;
- clocks = <&ssc1_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 15>;
clock-names = "pclk";
status = "disabled";
};
@@ -238,7 +238,7 @@
interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ssc2_tx &pinctrl_ssc2_rx>;
- clocks = <&ssc2_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 16>;
clock-names = "pclk";
status = "disabled";
};
@@ -252,7 +252,7 @@
interrupts = <12 IRQ_TYPE_LEVEL_HIGH 3>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi0>;
- clocks = <&spi0_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 12>;
clock-names = "spi_clk";
status = "disabled";
};
@@ -265,7 +265,7 @@
interrupts = <13 IRQ_TYPE_LEVEL_HIGH 3>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi1>;
- clocks = <&spi1_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 13>;
clock-names = "spi_clk";
status = "disabled";
};
@@ -299,7 +299,7 @@
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_dbgu>;
- clocks = <&mck>;
+ clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
clock-names = "usart";
status = "disabled";
};
@@ -563,7 +563,7 @@
gpio-controller;
interrupt-controller;
#interrupt-cells = <2>;
- clocks = <&pioA_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 2>;
};
pioB: gpio@fffff600 {
@@ -574,7 +574,7 @@
gpio-controller;
interrupt-controller;
#interrupt-cells = <2>;
- clocks = <&pioB_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 3>;
};
pioC: gpio@fffff800 {
@@ -585,7 +585,7 @@
gpio-controller;
interrupt-controller;
#interrupt-cells = <2>;
- clocks = <&pioC_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 4>;
};
};
@@ -593,250 +593,9 @@
compatible = "atmel,at91sam9261-pmc", "syscon";
reg = <0xfffffc00 0x100>;
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
- interrupt-controller;
- #address-cells = <1>;
- #size-cells = <0>;
- #interrupt-cells = <1>;
-
- main_osc: main_osc {
- compatible = "atmel,at91rm9200-clk-main-osc";
- #clock-cells = <0>;
- interrupts-extended = <&pmc AT91_PMC_MOSCS>;
- clocks = <&main_xtal>;
- };
-
- main: mainck {
- compatible = "atmel,at91rm9200-clk-main";
- #clock-cells = <0>;
- clocks = <&main_osc>;
- };
-
- plla: pllack {
- compatible = "atmel,at91rm9200-clk-pll";
- #clock-cells = <0>;
- interrupts-extended = <&pmc AT91_PMC_LOCKA>;
- clocks = <&main>;
- reg = <0>;
- atmel,clk-input-range = <1000000 32000000>;
- #atmel,pll-clk-output-range-cells = <4>;
- atmel,pll-clk-output-ranges = <80000000 200000000 0 1>,
- <190000000 240000000 2 1>;
- };
-
- pllb: pllbck {
- compatible = "atmel,at91rm9200-clk-pll";
- #clock-cells = <0>;
- interrupts-extended = <&pmc AT91_PMC_LOCKB>;
- clocks = <&main>;
- reg = <1>;
- atmel,clk-input-range = <1000000 5000000>;
- #atmel,pll-clk-output-range-cells = <4>;
- atmel,pll-clk-output-ranges = <70000000 130000000 1 1>;
- };
-
- mck: masterck {
- compatible = "atmel,at91rm9200-clk-master";
- #clock-cells = <0>;
- interrupts-extended = <&pmc AT91_PMC_MCKRDY>;
- clocks = <&slow_xtal>, <&main>, <&plla>, <&pllb>;
- atmel,clk-output-range = <0 94000000>;
- atmel,clk-divisors = <1 2 4 0>;
- };
-
- usb: usbck {
- compatible = "atmel,at91rm9200-clk-usb";
- #clock-cells = <0>;
- atmel,clk-divisors = <1 2 4 0>;
- clocks = <&pllb>;
- };
-
- prog: progck {
- compatible = "atmel,at91rm9200-clk-programmable";
- #address-cells = <1>;
- #size-cells = <0>;
- interrupt-parent = <&pmc>;
- clocks = <&slow_xtal>, <&main>, <&plla>, <&pllb>;
-
- prog0: prog0 {
- #clock-cells = <0>;
- reg = <0>;
- interrupts = <AT91_PMC_PCKRDY(0)>;
- };
-
- prog1: prog1 {
- #clock-cells = <0>;
- reg = <1>;
- interrupts = <AT91_PMC_PCKRDY(1)>;
- };
-
- prog2: prog2 {
- #clock-cells = <0>;
- reg = <2>;
- interrupts = <AT91_PMC_PCKRDY(2)>;
- };
-
- prog3: prog3 {
- #clock-cells = <0>;
- reg = <3>;
- interrupts = <AT91_PMC_PCKRDY(3)>;
- };
- };
-
- systemck {
- compatible = "atmel,at91rm9200-clk-system";
- #address-cells = <1>;
- #size-cells = <0>;
-
- uhpck: uhpck {
- #clock-cells = <0>;
- reg = <6>;
- clocks = <&usb>;
- };
-
- udpck: udpck {
- #clock-cells = <0>;
- reg = <7>;
- clocks = <&usb>;
- };
-
- pck0: pck0 {
- #clock-cells = <0>;
- reg = <8>;
- clocks = <&prog0>;
- };
-
- pck1: pck1 {
- #clock-cells = <0>;
- reg = <9>;
- clocks = <&prog1>;
- };
-
- pck2: pck2 {
- #clock-cells = <0>;
- reg = <10>;
- clocks = <&prog2>;
- };
-
- pck3: pck3 {
- #clock-cells = <0>;
- reg = <11>;
- clocks = <&prog3>;
- };
-
- hclk0: hclk0 {
- #clock-cells = <0>;
- reg = <16>;
- clocks = <&mck>;
- };
-
- hclk1: hclk1 {
- #clock-cells = <0>;
- reg = <17>;
- clocks = <&mck>;
- };
- };
-
- periphck {
- compatible = "atmel,at91rm9200-clk-peripheral";
- #address-cells = <1>;
- #size-cells = <0>;
- clocks = <&mck>;
-
- pioA_clk: pioA_clk {
- #clock-cells = <0>;
- reg = <2>;
- };
-
- pioB_clk: pioB_clk {
- #clock-cells = <0>;
- reg = <3>;
- };
-
- pioC_clk: pioC_clk {
- #clock-cells = <0>;
- reg = <4>;
- };
-
- usart0_clk: usart0_clk {
- #clock-cells = <0>;
- reg = <6>;
- };
-
- usart1_clk: usart1_clk {
- #clock-cells = <0>;
- reg = <7>;
- };
-
- usart2_clk: usart2_clk {
- #clock-cells = <0>;
- reg = <8>;
- };
-
- mci0_clk: mci0_clk {
- #clock-cells = <0>;
- reg = <9>;
- };
-
- udc_clk: udc_clk {
- #clock-cells = <0>;
- reg = <10>;
- };
-
- twi0_clk: twi0_clk {
- reg = <11>;
- #clock-cells = <0>;
- };
-
- spi0_clk: spi0_clk {
- #clock-cells = <0>;
- reg = <12>;
- };
-
- spi1_clk: spi1_clk {
- #clock-cells = <0>;
- reg = <13>;
- };
-
- ssc0_clk: ssc0_clk {
- #clock-cells = <0>;
- reg = <14>;
- };
-
- ssc1_clk: ssc1_clk {
- #clock-cells = <0>;
- reg = <15>;
- };
-
- ssc2_clk: ssc2_clk {
- #clock-cells = <0>;
- reg = <16>;
- };
-
- tc0_clk: tc0_clk {
- #clock-cells = <0>;
- reg = <17>;
- };
-
- tc1_clk: tc1_clk {
- #clock-cells = <0>;
- reg = <18>;
- };
-
- tc2_clk: tc2_clk {
- #clock-cells = <0>;
- reg = <19>;
- };
-
- ohci_clk: ohci_clk {
- #clock-cells = <0>;
- reg = <20>;
- };
-
- lcd_clk: lcd_clk {
- #clock-cells = <0>;
- reg = <21>;
- };
- };
+ #clock-cells = <2>;
+ clocks = <&slow_xtal>, <&main_xtal>;
+ clock-names = "slow_xtal", "main_xtal";
};
rstc@fffffd00 {
@@ -855,7 +614,7 @@
compatible = "atmel,at91sam9260-pit";
reg = <0xfffffd30 0xf>;
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
- clocks = <&mck>;
+ clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
};
rtc@fffffd20 {
--
2.19.1
next prev parent reply other threads:[~2018-10-16 14:22 UTC|newest]
Thread overview: 40+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-10-16 14:21 [PATCH v2 00/22] clk: at91: Rework DT bindings Alexandre Belloni
2018-10-16 14:21 ` [PATCH v2 01/22] clk: at91: audio-pll: fix audio pmc type Alexandre Belloni
2018-10-17 17:49 ` Stephen Boyd
2018-10-16 14:21 ` [PATCH v2 02/22] clk: at91: generated: SSCs don't have a gclk Alexandre Belloni
2018-10-17 17:49 ` Stephen Boyd
2018-10-16 14:21 ` [PATCH v2 03/22] clk: at91: h32mx: separate registration from DT parsing Alexandre Belloni
2018-10-17 17:49 ` Stephen Boyd
2018-10-16 14:21 ` [PATCH v2 04/22] clk: at91: audio-pll: " Alexandre Belloni
2018-10-17 17:49 ` Stephen Boyd
2018-10-16 14:21 ` [PATCH v2 05/22] clk: at91: generated: set audio_pll_allowed in at91_clk_register_generated() Alexandre Belloni
2018-10-17 17:49 ` Stephen Boyd
2018-10-16 14:21 ` [PATCH v2 06/22] clk: at91: allow clock registration from C code Alexandre Belloni
2018-10-17 17:49 ` Stephen Boyd
2018-10-16 14:21 ` [PATCH v2 07/22] clk: at91: add pmc_data struct and helpers Alexandre Belloni
2018-10-17 17:49 ` Stephen Boyd
2018-10-16 14:21 ` [PATCH v2 08/22] dt-bindings: clk: at91: Document new PMC binding Alexandre Belloni
2018-10-17 17:49 ` Stephen Boyd
2018-10-16 14:21 ` [PATCH v2 09/22] clk: at91: add new DT lookup function Alexandre Belloni
2018-10-17 17:50 ` Stephen Boyd
2018-10-16 14:21 ` [PATCH v2 10/22] clk: at91: add sama5d4 pmc driver Alexandre Belloni
2018-10-17 17:50 ` Stephen Boyd
2018-10-16 14:21 ` [PATCH v2 11/22] clk: at91: add sama5d2 PMC driver Alexandre Belloni
2018-10-17 17:50 ` Stephen Boyd
2018-10-16 14:21 ` [PATCH v2 12/22] clk: at91: add at91sam9260 " Alexandre Belloni
2018-10-17 17:50 ` Stephen Boyd
2018-10-16 14:21 ` [PATCH v2 13/22] clk: at91: add at91sam9x5 PMCs driver Alexandre Belloni
2018-10-17 17:50 ` Stephen Boyd
2018-10-16 14:21 ` [PATCH v2 14/22] clk: at91: add at91sam9rl PMC driver Alexandre Belloni
2018-10-17 17:50 ` Stephen Boyd
2018-10-16 14:21 ` [PATCH v2 15/22] clk: at91: move DT compatibility code to its own file Alexandre Belloni
2018-10-17 17:50 ` Stephen Boyd
2018-10-16 14:21 ` [PATCH v2 16/22] ARM: dts: at91: sama5d4: switch to new clock bindings Alexandre Belloni
2018-10-16 14:21 ` [PATCH v2 17/22] ARM: dts: at91: sama5d2: switch to new binding Alexandre Belloni
2018-10-16 14:21 ` [PATCH v2 18/22] ARM: dts: at91: at91sam9260: switch to new clock bindings Alexandre Belloni
2018-10-16 14:21 ` Alexandre Belloni [this message]
2018-10-16 14:21 ` [PATCH v2 20/22] ARM: dts: at91: at91sam9263: " Alexandre Belloni
2018-10-16 14:21 ` [PATCH v2 21/22] ARM: dts: at91: at91sam9x5: " Alexandre Belloni
2018-10-16 14:22 ` [PATCH v2 22/22] ARM: dts: at91: at91sam9rl: " Alexandre Belloni
2018-10-17 16:50 ` [PATCH v2 00/22] clk: at91: Rework DT bindings Stephen Boyd
2018-10-17 17:27 ` Alexandre Belloni
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181016142200.19741-20-alexandre.belloni@bootlin.com \
--to=alexandre.belloni@bootlin.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mturquette@baylibre.com \
--cc=nicolas.ferre@microchip.com \
--cc=sboyd@kernel.org \
--cc=thomas.petazzoni@bootlin.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).