[PATCH v2] clk: sunxi-ng: enable so-said LDOs for A64 SoC's pll-mipi clock

From: Icenowy Zheng <icenowy@aosc.io>
To: Maxime Ripard <maxime.ripard@bootlin.com>, Chen-Yu Tsai <wens@csie.org>
Cc: linux-arm-kernel@lists.infradead.org, linux-clk@vger.kernel.org,
	linux-kernel@vger.kernel.org, linux-sunxi@googlegroups.com,
	Icenowy Zheng <icenowy@aosc.io>
Subject: [PATCH v2] clk: sunxi-ng: enable so-said LDOs for A64 SoC's pll-mipi clock
Date: Thu, 18 Oct 2018 15:07:29 +0800	[thread overview]
Message-ID: <20181018070729.52943-1-icenowy@aosc.io> (raw)

In the user manual of A64 SoC, the bit 22 and 23 of pll-mipi control
register is called "LDO{1,2}_EN", and according to the BSP source code
from Allwinner , the LDOs are enabled during the clock's enabling
process.

The clock failed to generate output if the two LDOs are not enabled.

Add the two bits to the clock's gate bits, so that the LDOs are enabled
when the PLL is enabled.

Fixes: c6a0637460c2 ("clk: sunxi-ng: Add A64 clocks")
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
---
Changes in v2:
- Add a section of comments before the addition.

 drivers/clk/sunxi-ng/ccu-sun50i-a64.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/drivers/clk/sunxi-ng/ccu-sun50i-a64.c b/drivers/clk/sunxi-ng/ccu-sun50i-a64.c
index 5f80eb018014..884d8f7863c4 100644
--- a/drivers/clk/sunxi-ng/ccu-sun50i-a64.c
+++ b/drivers/clk/sunxi-ng/ccu-sun50i-a64.c
@@ -162,7 +162,12 @@ static SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK(pll_gpu_clk, "pll-gpu",
 #define SUN50I_A64_PLL_MIPI_REG		0x040
 
 static struct ccu_nkm pll_mipi_clk = {
-	.enable		= BIT(31),
+	/*
+	 * The bit 23 and 22 are called "LDO{1,2}_EN" on the SoC's
+	 * user manual, and by experiments the PLL doesn't work without
+	 * these bits toggled.
+	 */
+	.enable		= BIT(31) | BIT(23) | BIT(22),
 	.lock		= BIT(28),
 	.n		= _SUNXI_CCU_MULT(8, 4),
 	.k		= _SUNXI_CCU_MULT_MIN(4, 2, 2),
-- 
2.18.1

