linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Nathan Chancellor <natechancellor@gmail.com>
To: Adam Radford <aradford@gmail.com>,
	"James E.J. Bottomley" <jejb@linux.vnet.ibm.com>,
	"Martin K. Petersen" <martin.petersen@oracle.com>
Cc: linux-scsi@vger.kernel.org, linux-kernel@vger.kernel.org,
	Nathan Chancellor <natechancellor@gmail.com>
Subject: [PATCH] scsi: 3w-{sas,9xxx}: Use unsigned char for cdb
Date: Thu, 18 Oct 2018 14:55:41 -0700	[thread overview]
Message-ID: <20181018215541.4768-1-natechancellor@gmail.com> (raw)

Clang warns a few times:

drivers/scsi/3w-sas.c:386:11: warning: implicit conversion from 'int' to
'char' changes value from 128 to -128 [-Wconstant-conversion]
        cdb[4] = TW_ALLOCATION_LENGTH; /* allocation length */
               ~ ^~~~~~~~~~~~~~~~~~~~

Update cdb's type to unsigned char, which matches the type of the cdb
member in struct TW_Command_Apache.

Link: https://github.com/ClangBuiltLinux/linux/issues/158
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
---
 drivers/scsi/3w-9xxx.c | 12 ++++++++----
 drivers/scsi/3w-sas.c  |  8 +++++---
 2 files changed, 13 insertions(+), 7 deletions(-)

diff --git a/drivers/scsi/3w-9xxx.c b/drivers/scsi/3w-9xxx.c
index 05293babb031..2d655a97b959 100644
--- a/drivers/scsi/3w-9xxx.c
+++ b/drivers/scsi/3w-9xxx.c
@@ -143,7 +143,9 @@ static int twa_poll_status_gone(TW_Device_Extension *tw_dev, u32 flag, int secon
 static int twa_post_command_packet(TW_Device_Extension *tw_dev, int request_id, char internal);
 static int twa_reset_device_extension(TW_Device_Extension *tw_dev);
 static int twa_reset_sequence(TW_Device_Extension *tw_dev, int soft_reset);
-static int twa_scsiop_execute_scsi(TW_Device_Extension *tw_dev, int request_id, char *cdb, int use_sg, TW_SG_Entry *sglistarg);
+static int twa_scsiop_execute_scsi(TW_Device_Extension *tw_dev, int request_id,
+				   unsigned char *cdb, int use_sg,
+				   TW_SG_Entry *sglistarg);
 static void twa_scsiop_execute_scsi_complete(TW_Device_Extension *tw_dev, int request_id);
 static char *twa_string_lookup(twa_message_type *table, unsigned int aen_code);
 
@@ -278,7 +280,7 @@ static int twa_aen_complete(TW_Device_Extension *tw_dev, int request_id)
 static int twa_aen_drain_queue(TW_Device_Extension *tw_dev, int no_check_reset)
 {
 	int request_id = 0;
-	char cdb[TW_MAX_CDB_LEN];
+	unsigned char cdb[TW_MAX_CDB_LEN];
 	TW_SG_Entry sglist[1];
 	int finished = 0, count = 0;
 	TW_Command_Full *full_command_packet;
@@ -423,7 +425,7 @@ static void twa_aen_queue_event(TW_Device_Extension *tw_dev, TW_Command_Apache_H
 /* This function will read the aen queue from the isr */
 static int twa_aen_read_queue(TW_Device_Extension *tw_dev, int request_id)
 {
-	char cdb[TW_MAX_CDB_LEN];
+	unsigned char cdb[TW_MAX_CDB_LEN];
 	TW_SG_Entry sglist[1];
 	TW_Command_Full *full_command_packet;
 	int retval = 1;
@@ -1798,7 +1800,9 @@ static int twa_scsi_queue_lck(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_
 static DEF_SCSI_QCMD(twa_scsi_queue)
 
 /* This function hands scsi cdb's to the firmware */
-static int twa_scsiop_execute_scsi(TW_Device_Extension *tw_dev, int request_id, char *cdb, int use_sg, TW_SG_Entry *sglistarg)
+static int twa_scsiop_execute_scsi(TW_Device_Extension *tw_dev, int request_id,
+				   unsigned char *cdb, int use_sg,
+				   TW_SG_Entry *sglistarg)
 {
 	TW_Command_Full *full_command_packet;
 	TW_Command_Apache *command_packet;
diff --git a/drivers/scsi/3w-sas.c b/drivers/scsi/3w-sas.c
index 266bdac75304..480cf82700e9 100644
--- a/drivers/scsi/3w-sas.c
+++ b/drivers/scsi/3w-sas.c
@@ -287,7 +287,9 @@ static int twl_post_command_packet(TW_Device_Extension *tw_dev, int request_id)
 } /* End twl_post_command_packet() */
 
 /* This function hands scsi cdb's to the firmware */
-static int twl_scsiop_execute_scsi(TW_Device_Extension *tw_dev, int request_id, char *cdb, int use_sg, TW_SG_Entry_ISO *sglistarg)
+static int twl_scsiop_execute_scsi(TW_Device_Extension *tw_dev, int request_id,
+				   unsigned char *cdb, int use_sg,
+				   TW_SG_Entry_ISO *sglistarg)
 {
 	TW_Command_Full *full_command_packet;
 	TW_Command_Apache *command_packet;
@@ -372,7 +374,7 @@ static int twl_scsiop_execute_scsi(TW_Device_Extension *tw_dev, int request_id,
 /* This function will read the aen queue from the isr */
 static int twl_aen_read_queue(TW_Device_Extension *tw_dev, int request_id)
 {
-	char cdb[TW_MAX_CDB_LEN];
+	unsigned char cdb[TW_MAX_CDB_LEN];
 	TW_SG_Entry_ISO sglist[1];
 	TW_Command_Full *full_command_packet;
 	int retval = 1;
@@ -554,7 +556,7 @@ static int twl_poll_response(TW_Device_Extension *tw_dev, int request_id, int se
 static int twl_aen_drain_queue(TW_Device_Extension *tw_dev, int no_check_reset)
 {
 	int request_id = 0;
-	char cdb[TW_MAX_CDB_LEN];
+	unsigned char cdb[TW_MAX_CDB_LEN];
 	TW_SG_Entry_ISO sglist[1];
 	int finished = 0, count = 0;
 	TW_Command_Full *full_command_packet;
-- 
2.19.1


             reply	other threads:[~2018-10-18 21:55 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-10-18 21:55 Nathan Chancellor [this message]
2018-10-19 20:59 ` [PATCH] scsi: 3w-{sas,9xxx}: Use unsigned char for cdb adam radford
2018-10-19 21:03 ` adam radford
2018-10-24  1:29 ` Martin K. Petersen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20181018215541.4768-1-natechancellor@gmail.com \
    --to=natechancellor@gmail.com \
    --cc=aradford@gmail.com \
    --cc=jejb@linux.vnet.ibm.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-scsi@vger.kernel.org \
    --cc=martin.petersen@oracle.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).