From: Stefan Popa <stefan.popa@analog.com>
To: <jic23@kernel.org>
Cc: <Michael.Hennerich@analog.com>, <knaack.h@gmx.de>,
<lars@metafoo.de>, <pmeerw@pmeerw.net>,
<gregkh@linuxfoundation.org>, <linux-kernel@vger.kernel.org>,
<linux-iio@vger.kernel.org>, <stefan.popa@analog.com>
Subject: [PATCH v2 1/3] iio: ad_sigma_delta: Allow to provide custom data register address
Date: Fri, 19 Oct 2018 10:46:15 +0300 [thread overview]
Message-ID: <1539935175-8690-1-git-send-email-stefan.popa@analog.com> (raw)
From: Lars-Peter Clausen <lars@metafoo.de>
Some newer devices from the Sigma-Delta ADC family do have their data
register at a different address than the current default address. Add a
parameter to the ad_sigma_delta_info struct which allows to override the
default address.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Stefan Popa <stefan.popa@analog.com>
---
Changes in v2:
- Added this commit.
drivers/iio/adc/ad_sigma_delta.c | 22 +++++++++++++++++-----
include/linux/iio/adc/ad_sigma_delta.h | 3 +++
2 files changed, 20 insertions(+), 5 deletions(-)
diff --git a/drivers/iio/adc/ad_sigma_delta.c b/drivers/iio/adc/ad_sigma_delta.c
index fc95107..ff5f2da 100644
--- a/drivers/iio/adc/ad_sigma_delta.c
+++ b/drivers/iio/adc/ad_sigma_delta.c
@@ -278,6 +278,7 @@ int ad_sigma_delta_single_conversion(struct iio_dev *indio_dev,
{
struct ad_sigma_delta *sigma_delta = iio_device_get_drvdata(indio_dev);
unsigned int sample, raw_sample;
+ unsigned int data_reg;
int ret = 0;
if (iio_buffer_enabled(indio_dev))
@@ -305,7 +306,12 @@ int ad_sigma_delta_single_conversion(struct iio_dev *indio_dev,
if (ret < 0)
goto out;
- ret = ad_sd_read_reg(sigma_delta, AD_SD_REG_DATA,
+ if (sigma_delta->info->data_reg != 0)
+ data_reg = sigma_delta->info->data_reg;
+ else
+ data_reg = AD_SD_REG_DATA;
+
+ ret = ad_sd_read_reg(sigma_delta, data_reg,
DIV_ROUND_UP(chan->scan_type.realbits + chan->scan_type.shift, 8),
&raw_sample);
@@ -392,6 +398,7 @@ static irqreturn_t ad_sd_trigger_handler(int irq, void *p)
struct iio_dev *indio_dev = pf->indio_dev;
struct ad_sigma_delta *sigma_delta = iio_device_get_drvdata(indio_dev);
unsigned int reg_size;
+ unsigned int data_reg;
uint8_t data[16];
int ret;
@@ -401,18 +408,23 @@ static irqreturn_t ad_sd_trigger_handler(int irq, void *p)
indio_dev->channels[0].scan_type.shift;
reg_size = DIV_ROUND_UP(reg_size, 8);
+ if (sigma_delta->info->data_reg != 0)
+ data_reg = sigma_delta->info->data_reg;
+ else
+ data_reg = AD_SD_REG_DATA;
+
switch (reg_size) {
case 4:
case 2:
case 1:
- ret = ad_sd_read_reg_raw(sigma_delta, AD_SD_REG_DATA,
- reg_size, &data[0]);
+ ret = ad_sd_read_reg_raw(sigma_delta, data_reg, reg_size,
+ &data[0]);
break;
case 3:
/* We store 24 bit samples in a 32 bit word. Keep the upper
* byte set to zero. */
- ret = ad_sd_read_reg_raw(sigma_delta, AD_SD_REG_DATA,
- reg_size, &data[1]);
+ ret = ad_sd_read_reg_raw(sigma_delta, data_reg, reg_size,
+ &data[1]);
break;
}
diff --git a/include/linux/iio/adc/ad_sigma_delta.h b/include/linux/iio/adc/ad_sigma_delta.h
index 730ead1..7e84351 100644
--- a/include/linux/iio/adc/ad_sigma_delta.h
+++ b/include/linux/iio/adc/ad_sigma_delta.h
@@ -39,6 +39,8 @@ struct iio_dev;
* if there is just one read-only sample data shift register.
* @addr_shift: Shift of the register address in the communications register.
* @read_mask: Mask for the communications register having the read bit set.
+ * @data_reg: Address of the data register, if 0 the default address of 0x3 will
+ * be used.
*/
struct ad_sigma_delta_info {
int (*set_channel)(struct ad_sigma_delta *, unsigned int channel);
@@ -47,6 +49,7 @@ struct ad_sigma_delta_info {
bool has_registers;
unsigned int addr_shift;
unsigned int read_mask;
+ unsigned int data_reg;
};
/**
--
2.7.4
reply other threads:[~2018-10-19 7:48 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1539935175-8690-1-git-send-email-stefan.popa@analog.com \
--to=stefan.popa@analog.com \
--cc=Michael.Hennerich@analog.com \
--cc=gregkh@linuxfoundation.org \
--cc=jic23@kernel.org \
--cc=knaack.h@gmx.de \
--cc=lars@metafoo.de \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=pmeerw@pmeerw.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).