linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Jon Hunter <jonathanh@nvidia.com>
To: Lee Jones <lee.jones@linaro.org>
Cc: <linux-kernel@vger.kernel.org>, <linux-tegra@vger.kernel.org>,
	"Dmitry Osipenko" <digetx@gmail.com>,
	Jonathan Hunter <jonathanh@nvidia.com>, <stable@vger.kernel.org>
Subject: [PATCH] mfd: tps6586x: Handle interrupts on suspend
Date: Fri, 19 Oct 2018 14:22:53 +0100	[thread overview]
Message-ID: <1539955373-13735-1-git-send-email-jonathanh@nvidia.com> (raw)

From: Jonathan Hunter <jonathanh@nvidia.com>

The tps6586x driver creates an irqchip that is used by its various child
devices for managing interrupts. The tps6586x-rtc device is one of its
children that uses the tps6586x irqchip. When using the tps6586x-rtc as
a wake-up device from suspend, the following is seen:

 PM: Syncing filesystems ... done.
 Freezing user space processes ... (elapsed 0.001 seconds) done.
 OOM killer disabled.
 Freezing remaining freezable tasks ... (elapsed 0.000 seconds) done.
 Disabling non-boot CPUs ...
 Entering suspend state LP1
 Enabling non-boot CPUs ...
 CPU1 is up
 tps6586x 3-0034: failed to read interrupt status
 tps6586x 3-0034: failed to read interrupt status

The reason why the tps6586x interrupt status cannot be read is because
the tps6586x interrupt is not masked during suspend and when the
tps6586x-rtc interrupt occurs, to wake-up the device, the interrupt is
seen before the i2c controller has been resumed in order to read the
tps6586x interrupt status.

The tps6586x-rtc driver sets it's interrupt as a wake-up source during
suspend, which gets propagated to the parent tps6586x interrupt.
However, the tps6586x-rtc driver cannot disable it's interrupt during
suspend otherwise we would never be woken up and so the tps6586x must
disable it's interrupt instead.

Prevent the tps6586x interrupt handler from executing on exiting suspend
before the i2c controller has been resumed by disabling the tps6586x
interrupt on entering suspend and re-enabling it on resuming from
suspend.

Cc: stable@vger.kernel.org

Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
---
 drivers/mfd/tps6586x.c | 24 ++++++++++++++++++++++++
 1 file changed, 24 insertions(+)

diff --git a/drivers/mfd/tps6586x.c b/drivers/mfd/tps6586x.c
index b89379782741..9c7925ca13cf 100644
--- a/drivers/mfd/tps6586x.c
+++ b/drivers/mfd/tps6586x.c
@@ -592,6 +592,29 @@ static int tps6586x_i2c_remove(struct i2c_client *client)
 	return 0;
 }
 
+static int __maybe_unused tps6586x_i2c_suspend(struct device *dev)
+{
+	struct tps6586x *tps6586x = dev_get_drvdata(dev);
+
+	if (tps6586x->client->irq)
+		disable_irq(tps6586x->client->irq);
+
+	return 0;
+}
+
+static int __maybe_unused tps6586x_i2c_resume(struct device *dev)
+{
+	struct tps6586x *tps6586x = dev_get_drvdata(dev);
+
+	if (tps6586x->client->irq)
+		enable_irq(tps6586x->client->irq);
+
+	return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(tps6586x_pm_ops, tps6586x_i2c_suspend,
+			 tps6586x_i2c_resume);
+
 static const struct i2c_device_id tps6586x_id_table[] = {
 	{ "tps6586x", 0 },
 	{ },
@@ -602,6 +625,7 @@ static struct i2c_driver tps6586x_driver = {
 	.driver	= {
 		.name	= "tps6586x",
 		.of_match_table = of_match_ptr(tps6586x_of_match),
+		.pm	= &tps6586x_pm_ops,
 	},
 	.probe		= tps6586x_i2c_probe,
 	.remove		= tps6586x_i2c_remove,
-- 
2.7.4


             reply	other threads:[~2018-10-19 13:23 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-10-19 13:22 Jon Hunter [this message]
2018-10-20 21:18 ` [PATCH] mfd: tps6586x: Handle interrupts on suspend Dmitry Osipenko
2018-10-22  9:52 ` Thierry Reding
2018-10-22 11:19   ` Dmitry Osipenko
2018-10-24 10:49     ` Jon Hunter
2018-10-24 12:44       ` Dmitry Osipenko
2018-10-24 14:19         ` Jon Hunter
2018-10-25 13:01           ` Dmitry Osipenko
2018-10-24 10:41   ` Jon Hunter
2018-10-29  9:53 ` Thierry Reding
2018-11-05 11:24 ` Jon Hunter
2018-11-13  7:52   ` Lee Jones

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1539955373-13735-1-git-send-email-jonathanh@nvidia.com \
    --to=jonathanh@nvidia.com \
    --cc=digetx@gmail.com \
    --cc=lee.jones@linaro.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-tegra@vger.kernel.org \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).