From: Nathan Chancellor <natechancellor@gmail.com>
To: Kirti Wankhede <kwankhede@nvidia.com>
Cc: kvm@vger.kernel.org, linux-kernel@vger.kernel.org,
Nathan Chancellor <natechancellor@gmail.com>
Subject: [PATCH] vfio-mdev/samples: Use u8 instead of char for handle functions
Date: Fri, 19 Oct 2018 11:04:27 -0700 [thread overview]
Message-ID: <20181019180427.1386-1-natechancellor@gmail.com> (raw)
Clang warns:
samples/vfio-mdev/mtty.c:592:39: warning: implicit conversion from 'int'
to 'char' changes value from 162 to -94 [-Wconstant-conversion]
*buf = UART_MSR_DSR | UART_MSR_DDSR | UART_MSR_DCD;
~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~
1 warning generated.
Turns out that all uses of buf in this function ultimately end up stored
or cast to an unsigned type. Just use u8, which has the same number of
bits but can store this larger number so Clang no longer warns.
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
---
samples/vfio-mdev/mtty.c | 26 +++++++++++++-------------
1 file changed, 13 insertions(+), 13 deletions(-)
diff --git a/samples/vfio-mdev/mtty.c b/samples/vfio-mdev/mtty.c
index 7abb79d8313d..f6732aa16bb1 100644
--- a/samples/vfio-mdev/mtty.c
+++ b/samples/vfio-mdev/mtty.c
@@ -171,7 +171,7 @@ static struct mdev_state *find_mdev_state_by_uuid(uuid_le uuid)
return NULL;
}
-void dump_buffer(char *buf, uint32_t count)
+void dump_buffer(u8 *buf, uint32_t count)
{
#if defined(DEBUG)
int i;
@@ -250,7 +250,7 @@ static void mtty_create_config_space(struct mdev_state *mdev_state)
}
static void handle_pci_cfg_write(struct mdev_state *mdev_state, u16 offset,
- char *buf, u32 count)
+ u8 *buf, u32 count)
{
u32 cfg_addr, bar_mask, bar_index = 0;
@@ -304,7 +304,7 @@ static void handle_pci_cfg_write(struct mdev_state *mdev_state, u16 offset,
}
static void handle_bar_write(unsigned int index, struct mdev_state *mdev_state,
- u16 offset, char *buf, u32 count)
+ u16 offset, u8 *buf, u32 count)
{
u8 data = *buf;
@@ -475,7 +475,7 @@ static void handle_bar_write(unsigned int index, struct mdev_state *mdev_state,
}
static void handle_bar_read(unsigned int index, struct mdev_state *mdev_state,
- u16 offset, char *buf, u32 count)
+ u16 offset, u8 *buf, u32 count)
{
/* Handle read requests by guest */
switch (offset) {
@@ -650,7 +650,7 @@ static void mdev_read_base(struct mdev_state *mdev_state)
}
}
-static ssize_t mdev_access(struct mdev_device *mdev, char *buf, size_t count,
+static ssize_t mdev_access(struct mdev_device *mdev, u8 *buf, size_t count,
loff_t pos, bool is_write)
{
struct mdev_state *mdev_state;
@@ -698,7 +698,7 @@ static ssize_t mdev_access(struct mdev_device *mdev, char *buf, size_t count,
#if defined(DEBUG_REGS)
pr_info("%s: BAR%d WR @0x%llx %s val:0x%02x dlab:%d\n",
__func__, index, offset, wr_reg[offset],
- (u8)*buf, mdev_state->s[index].dlab);
+ *buf, mdev_state->s[index].dlab);
#endif
handle_bar_write(index, mdev_state, offset, buf, count);
} else {
@@ -708,7 +708,7 @@ static ssize_t mdev_access(struct mdev_device *mdev, char *buf, size_t count,
#if defined(DEBUG_REGS)
pr_info("%s: BAR%d RD @0x%llx %s val:0x%02x dlab:%d\n",
__func__, index, offset, rd_reg[offset],
- (u8)*buf, mdev_state->s[index].dlab);
+ *buf, mdev_state->s[index].dlab);
#endif
}
break;
@@ -827,7 +827,7 @@ ssize_t mtty_read(struct mdev_device *mdev, char __user *buf, size_t count,
if (count >= 4 && !(*ppos % 4)) {
u32 val;
- ret = mdev_access(mdev, (char *)&val, sizeof(val),
+ ret = mdev_access(mdev, (u8 *)&val, sizeof(val),
*ppos, false);
if (ret <= 0)
goto read_err;
@@ -839,7 +839,7 @@ ssize_t mtty_read(struct mdev_device *mdev, char __user *buf, size_t count,
} else if (count >= 2 && !(*ppos % 2)) {
u16 val;
- ret = mdev_access(mdev, (char *)&val, sizeof(val),
+ ret = mdev_access(mdev, (u8 *)&val, sizeof(val),
*ppos, false);
if (ret <= 0)
goto read_err;
@@ -851,7 +851,7 @@ ssize_t mtty_read(struct mdev_device *mdev, char __user *buf, size_t count,
} else {
u8 val;
- ret = mdev_access(mdev, (char *)&val, sizeof(val),
+ ret = mdev_access(mdev, (u8 *)&val, sizeof(val),
*ppos, false);
if (ret <= 0)
goto read_err;
@@ -889,7 +889,7 @@ ssize_t mtty_write(struct mdev_device *mdev, const char __user *buf,
if (copy_from_user(&val, buf, sizeof(val)))
goto write_err;
- ret = mdev_access(mdev, (char *)&val, sizeof(val),
+ ret = mdev_access(mdev, (u8 *)&val, sizeof(val),
*ppos, true);
if (ret <= 0)
goto write_err;
@@ -901,7 +901,7 @@ ssize_t mtty_write(struct mdev_device *mdev, const char __user *buf,
if (copy_from_user(&val, buf, sizeof(val)))
goto write_err;
- ret = mdev_access(mdev, (char *)&val, sizeof(val),
+ ret = mdev_access(mdev, (u8 *)&val, sizeof(val),
*ppos, true);
if (ret <= 0)
goto write_err;
@@ -913,7 +913,7 @@ ssize_t mtty_write(struct mdev_device *mdev, const char __user *buf,
if (copy_from_user(&val, buf, sizeof(val)))
goto write_err;
- ret = mdev_access(mdev, (char *)&val, sizeof(val),
+ ret = mdev_access(mdev, (u8 *)&val, sizeof(val),
*ppos, true);
if (ret <= 0)
goto write_err;
--
2.19.1
next reply other threads:[~2018-10-19 18:04 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-10-19 18:04 Nathan Chancellor [this message]
2018-12-17 17:42 ` [PATCH] vfio-mdev/samples: Use u8 instead of char for handle functions Nathan Chancellor
2018-12-17 18:12 ` Alex Williamson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181019180427.1386-1-natechancellor@gmail.com \
--to=natechancellor@gmail.com \
--cc=kvm@vger.kernel.org \
--cc=kwankhede@nvidia.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).