From: Alex Gonzalez <alex.gonzalez@digi.com>
To: <shawnguo@kernel.org>
Cc: <robh+dt@kernel.org>, <mark.rutland@arm.com>,
<s.hauer@pengutronix.de>, <kernel@pengutronix.de>,
<fabio.estevam@nxp.com>, <linux-imx@nxp.com>,
<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>, <alex.gonzalez@digi.com>
Subject: [PATCH v1] ARM: dts: imx6ul: ccimx6ulsom: Add support for wireless SOM variant
Date: Mon, 22 Oct 2018 11:27:23 +0200 [thread overview]
Message-ID: <1540200443-24773-2-git-send-email-alex.gonzalez@digi.com> (raw)
In-Reply-To: <1540200443-24773-1-git-send-email-alex.gonzalez@digi.com>
The wireless variants of the ConnecCore 6UL SOM include a Qualcomm
QCA6564 wireless chip with dual WiFi and Bluetooth.
Both the ConnectCore 6UL SBC Express and Pro boards fit a wireless SOM.
The Wifi is connected through the SDIO interface on usdhc1 and the
Bluetooth is connected via uart1.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
---
arch/arm/boot/dts/imx6ul-ccimx6ulsom.dtsi | 64 +++++++++++++++++++++++++++++++
1 file changed, 64 insertions(+)
diff --git a/arch/arm/boot/dts/imx6ul-ccimx6ulsom.dtsi b/arch/arm/boot/dts/imx6ul-ccimx6ulsom.dtsi
index c71a84da1af0..23bbcd4c71d1 100644
--- a/arch/arm/boot/dts/imx6ul-ccimx6ulsom.dtsi
+++ b/arch/arm/boot/dts/imx6ul-ccimx6ulsom.dtsi
@@ -161,6 +161,25 @@
};
};
+/* UART1 (Bluetooth) */
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ uart-has-rtscts;
+ status = "okay";
+};
+
+/* USDHC1 (Wireless) */
+&usdhc1 {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&pinctrl_usdhc1 &pinctrl_wifibt_ctrl>;
+ pinctrl-1 = <&pinctrl_usdhc1_sleep &pinctrl_wifibt_ctrl_sleep>;
+ non-removable;
+ no-1-8-v;
+ bus-width = <4>;
+ status = "okay";
+};
+
&iomuxc {
pinctrl_gpmi_nand: gpmigrp {
fsl,pins = <
@@ -188,6 +207,51 @@
MX6UL_PAD_UART4_RX_DATA__I2C1_SDA 0x4001b8b0
>;
};
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1
+ MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x1b0b1
+ MX6UL_PAD_UART1_RTS_B__UART1_DCE_RTS 0x1b0b1
+ MX6UL_PAD_UART1_CTS_B__UART1_DCE_CTS 0x1b0b1
+ >;
+ };
+
+ pinctrl_usdhc1: usdhc1grp {
+ fsl,pins = <
+ MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x17059
+ MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x17051
+ MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x17059
+ MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x17059
+ MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x17059
+ MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x17059
+ >;
+ };
+
+ pinctrl_usdhc1_sleep: usdhc1grp-sleep {
+ fsl,pins = <
+ MX6UL_PAD_SD1_CMD__GPIO2_IO16 0x3000
+ MX6UL_PAD_SD1_CLK__GPIO2_IO17 0x3000
+ MX6UL_PAD_SD1_DATA0__GPIO2_IO18 0x3000
+ MX6UL_PAD_SD1_DATA1__GPIO2_IO19 0x3000
+ MX6UL_PAD_SD1_DATA2__GPIO2_IO20 0x3000
+ MX6UL_PAD_SD1_DATA3__GPIO2_IO21 0x3000
+ >;
+ };
+
+ pinctrl_wifibt_ctrl: wifibt-ctrl-grp {
+ fsl,pins = <
+ MX6UL_PAD_SNVS_TAMPER0__GPIO5_IO00 0x08a0
+ MX6UL_PAD_SNVS_TAMPER9__GPIO5_IO09 0x08a0
+ >;
+ };
+
+ pinctrl_wifibt_ctrl_sleep: wifibt-ctrl-grp-sleep {
+ fsl,pins = <
+ MX6UL_PAD_SNVS_TAMPER0__GPIO5_IO00 0x3000
+ MX6UL_PAD_SNVS_TAMPER9__GPIO5_IO09 0x3000
+ >;
+ };
};
®_arm {
next prev parent reply other threads:[~2018-10-22 9:27 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-10-22 9:27 [PATCH v1] ARM: dts: imx6ul: ccimx6ulsom: Add support for wireless SOM variant Alex Gonzalez
2018-10-22 9:27 ` Alex Gonzalez [this message]
2018-10-22 12:33 ` Fabio Estevam
2018-11-04 7:32 ` Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1540200443-24773-2-git-send-email-alex.gonzalez@digi.com \
--to=alex.gonzalez@digi.com \
--cc=devicetree@vger.kernel.org \
--cc=fabio.estevam@nxp.com \
--cc=kernel@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=robh+dt@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).