From: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
To: xuwei5@hisilicon.com, linus.walleij@linaro.org, robh+dt@kernel.org
Cc: linux-gpio@vger.kernel.org, devicetree@vger.kernel.org,
amit.kucheria@linaro.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org,
Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Subject: [PATCH 2/5] arm64: dts: hisilicon: hi3760: Add GPIO controller support
Date: Wed, 24 Oct 2018 00:36:52 +0530 [thread overview]
Message-ID: <20181023190655.12004-3-manivannan.sadhasivam@linaro.org> (raw)
In-Reply-To: <20181023190655.12004-1-manivannan.sadhasivam@linaro.org>
Add GPIO controller support for HiSilicon HI3670 SoC based on ARM
Primecell PL061 GPIO controller.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
---
.../boot/dts/hisilicon/hi3670-hikey970.dts | 1 +
arch/arm64/boot/dts/hisilicon/hi3670.dtsi | 379 ++++++++++++++++++
2 files changed, 380 insertions(+)
diff --git a/arch/arm64/boot/dts/hisilicon/hi3670-hikey970.dts b/arch/arm64/boot/dts/hisilicon/hi3670-hikey970.dts
index 4f5118642024..8fdc1dfcb06c 100644
--- a/arch/arm64/boot/dts/hisilicon/hi3670-hikey970.dts
+++ b/arch/arm64/boot/dts/hisilicon/hi3670-hikey970.dts
@@ -10,6 +10,7 @@
/dts-v1/;
#include "hi3670.dtsi"
+#include "hikey970-pinctrl.dtsi"
/ {
model = "HiKey970";
diff --git a/arch/arm64/boot/dts/hisilicon/hi3670.dtsi b/arch/arm64/boot/dts/hisilicon/hi3670.dtsi
index 34a2f0dbc6f7..b99f5e0fe577 100644
--- a/arch/arm64/boot/dts/hisilicon/hi3670.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hi3670.dtsi
@@ -196,5 +196,384 @@
clock-names = "uartclk", "apb_pclk";
status = "disabled";
};
+
+ gpio0: gpio@e8a0b000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0x0 0xe8a0b000 0x0 0x1000>;
+ interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pmx0 1 0 1 &pmx0 3 1 5>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&crg_ctrl HI3670_PCLK_GPIO0>;
+ clock-names = "apb_pclk";
+ };
+
+ gpio1: gpio@e8a0c000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0x0 0xe8a0c000 0x0 0x1000>;
+ interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&crg_ctrl HI3670_PCLK_GPIO1>;
+ clock-names = "apb_pclk";
+ };
+
+ gpio2: gpio@e8a0d000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0x0 0xe8a0d000 0x0 0x1000>;
+ interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pmx0 1 6 7>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&crg_ctrl HI3670_PCLK_GPIO2>;
+ clock-names = "apb_pclk";
+ };
+
+ gpio3: gpio@e8a0e000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0x0 0xe8a0e000 0x0 0x1000>;
+ interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pmx0 0 13 4 &pmx0 7 17 1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&crg_ctrl HI3670_PCLK_GPIO3>;
+ clock-names = "apb_pclk";
+ };
+
+ gpio4: gpio@e8a0f000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0x0 0xe8a0f000 0x0 0x1000>;
+ interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pmx0 0 18 8>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&crg_ctrl HI3670_PCLK_GPIO4>;
+ clock-names = "apb_pclk";
+ };
+
+ gpio5: gpio@e8a10000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0x0 0xe8a10000 0x0 0x1000>;
+ interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pmx0 0 26 8>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&crg_ctrl HI3670_PCLK_GPIO5>;
+ clock-names = "apb_pclk";
+ };
+
+ gpio6: gpio@e8a11000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0x0 0xe8a11000 0x0 0x1000>;
+ interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pmx0 1 34 7>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&crg_ctrl HI3670_PCLK_GPIO6>;
+ clock-names = "apb_pclk";
+ };
+
+ gpio7: gpio@e8a12000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0x0 0xe8a12000 0x0 0x1000>;
+ interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pmx0 0 41 8>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&crg_ctrl HI3670_PCLK_GPIO7>;
+ clock-names = "apb_pclk";
+ };
+
+ gpio8: gpio@e8a13000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0x0 0xe8a13000 0x0 0x1000>;
+ interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pmx0 0 49 8>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&crg_ctrl HI3670_PCLK_GPIO8>;
+ clock-names = "apb_pclk";
+ };
+
+ gpio9: gpio@e8a14000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0x0 0xe8a14000 0x0 0x1000>;
+ interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pmx0 0 57 8>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&crg_ctrl HI3670_PCLK_GPIO9>;
+ clock-names = "apb_pclk";
+ };
+
+ gpio10: gpio@e8a15000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0x0 0xe8a15000 0x0 0x1000>;
+ interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pmx0 0 65 8>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&crg_ctrl HI3670_PCLK_GPIO10>;
+ clock-names = "apb_pclk";
+ };
+
+ gpio11: gpio@e8a16000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0x0 0xe8a16000 0x0 0x1000>;
+ interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pmx0 0 73 8>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&crg_ctrl HI3670_PCLK_GPIO11>;
+ clock-names = "apb_pclk";
+ };
+
+ gpio12: gpio@e8a17000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0x0 0xe8a17000 0x0 0x1000>;
+ interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pmx0 0 81 1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&crg_ctrl HI3670_PCLK_GPIO12>;
+ clock-names = "apb_pclk";
+ };
+
+ gpio13: gpio@e8a18000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0x0 0xe8a18000 0x0 0x1000>;
+ interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&crg_ctrl HI3670_PCLK_GPIO13>;
+ clock-names = "apb_pclk";
+ };
+
+ gpio14: gpio@e8a19000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0x0 0xe8a19000 0x0 0x1000>;
+ interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&crg_ctrl HI3670_PCLK_GPIO14>;
+ clock-names = "apb_pclk";
+ };
+
+ gpio15: gpio@e8a1a000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0x0 0xe8a1a000 0x0 0x1000>;
+ interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&crg_ctrl HI3670_PCLK_GPIO15>;
+ clock-names = "apb_pclk";
+ };
+
+ gpio16: gpio@e8a1b000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0x0 0xe8a1b000 0x0 0x1000>;
+ interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pmx5 0 0 8>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&crg_ctrl HI3670_PCLK_GPIO16>;
+ clock-names = "apb_pclk";
+ };
+
+ gpio17: gpio@e8a1c000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0x0 0xe8a1c000 0x0 0x1000>;
+ interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pmx5 0 8 2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&crg_ctrl HI3670_PCLK_GPIO17>;
+ clock-names = "apb_pclk";
+ };
+
+ gpio18: gpio@fff28000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0x0 0xfff28000 0x0 0x1000>;
+ interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pmx1 4 42 4>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&sctrl HI3670_PCLK_GPIO18>;
+ clock-names = "apb_pclk";
+ };
+
+ gpio19: gpio@fff29000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0x0 0xfff29000 0x0 0x1000>;
+ interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pmx1 0 61 2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&sctrl HI3670_PCLK_GPIO19>;
+ clock-names = "apb_pclk";
+ };
+
+ gpio20: gpio@e8a1f000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0x0 0xe8a1f000 0x0 0x1000>;
+ interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pmx7 0 0 8>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&crg_ctrl HI3670_PCLK_GPIO20>;
+ clock-names = "apb_pclk";
+ };
+
+ gpio21: gpio@e8a20000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0x0 0xe8a20000 0x0 0x1000>;
+ interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pmx7 0 8 4>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&crg_ctrl HI3670_PCLK_GPIO21>;
+ clock-names = "apb_pclk";
+ };
+
+ gpio22: gpio@fff0b000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0x0 0xfff0b000 0x0 0x1000>;
+ interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ /* GPIO176 */
+ gpio-ranges = <&pmx1 2 0 6>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&sctrl HI3670_PCLK_AO_GPIO0>;
+ clock-names = "apb_pclk";
+ };
+
+ gpio23: gpio@fff0c000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0x0 0xfff0c000 0x0 0x1000>;
+ interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ /* GPIO184 */
+ gpio-ranges = <&pmx1 0 6 8>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&sctrl HI3670_PCLK_AO_GPIO1>;
+ clock-names = "apb_pclk";
+ };
+
+ gpio24: gpio@fff0d000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0x0 0xfff0d000 0x0 0x1000>;
+ interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ /* GPIO192 */
+ gpio-ranges = <&pmx1 0 14 8>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&sctrl HI3670_PCLK_AO_GPIO2>;
+ clock-names = "apb_pclk";
+ };
+
+ gpio25: gpio@fff0e000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0x0 0xfff0e000 0x0 0x1000>;
+ interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ /* GPIO200 */
+ gpio-ranges = <&pmx1 0 22 8>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&sctrl HI3670_PCLK_AO_GPIO3>;
+ clock-names = "apb_pclk";
+ };
+
+ gpio26: gpio@fff0f000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0x0 0xfff0f000 0x0 0x1000>;
+ interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ /* GPIO208 */
+ gpio-ranges = <&pmx1 0 30 1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&sctrl HI3670_PCLK_AO_GPIO4>;
+ clock-names = "apb_pclk";
+ };
+
+ gpio27: gpio@fff10000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0x0 0xfff10000 0x0 0x1000>;
+ interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ /* GPIO216 */
+ gpio-ranges = <&pmx1 4 31 4>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&sctrl HI3670_PCLK_AO_GPIO5>;
+ clock-names = "apb_pclk";
+ };
+
+ gpio28: gpio@fff1d000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0x0 0xfff1d000 0x0 0x1000>;
+ interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pmx1 1 35 7>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&sctrl HI3670_PCLK_AO_GPIO6>;
+ clock-names = "apb_pclk";
+ };
};
};
--
2.17.1
next prev parent reply other threads:[~2018-10-23 19:07 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-10-23 19:06 [PATCH 0/5] Add Pinctrl and GPIO support for HI3670 SoC Manivannan Sadhasivam
2018-10-23 19:06 ` [PATCH 1/5] arm64: dts: hisilicon: Add Pinctrl support for HiKey970 board Manivannan Sadhasivam
2018-10-23 19:06 ` Manivannan Sadhasivam [this message]
2018-10-23 19:06 ` [PATCH 3/5] arm64: dts: hisilicon: hi3670: Add UART nodes Manivannan Sadhasivam
2018-10-23 19:06 ` [PATCH 4/5] arm64: boot: dts: hisilicon: hikey970: Enable on-board UARTs Manivannan Sadhasivam
2018-10-23 19:06 ` [PATCH 5/5] arm64: dts: hisilicon: hikey970: Add GPIO line names Manivannan Sadhasivam
2018-10-31 9:43 ` [PATCH 0/5] Add Pinctrl and GPIO support for HI3670 SoC Linus Walleij
2018-11-12 7:17 ` Manivannan Sadhasivam
2018-11-29 15:29 ` Wei Xu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181023190655.12004-3-manivannan.sadhasivam@linaro.org \
--to=manivannan.sadhasivam@linaro.org \
--cc=amit.kucheria@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=xuwei5@hisilicon.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).