USB: quirks: Add no-lpm quirk for Raydium touchscreens
diff mbox series

Message ID 20181026053315.32188-1-kai.heng.feng@canonical.com
State Accepted
Commit deefd24228a172d1b27d4a9adbfd2cdacd60ae64
Headers show
Series
  • USB: quirks: Add no-lpm quirk for Raydium touchscreens
Related show

Commit Message

Kai-Heng Feng Oct. 26, 2018, 5:33 a.m. UTC
Raydium USB touchscreen fails to set config if LPM is enabled:
[    2.030658] usb 1-8: New USB device found, idVendor=2386, idProduct=3119
[    2.030659] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.030660] usb 1-8: Product: Raydium Touch System
[    2.030661] usb 1-8: Manufacturer: Raydium Corporation
[    7.132209] usb 1-8: can't set config #1, error -110

Same behavior can be observed on 2386:3114.

Raydium claims the touchscreen supports LPM under Windows, so I used
Microsoft USB Test Tools (MUTT) [1] to check its LPM status. MUTT shows
that the LPM doesn't work under Windows, either. So let's just disable LPM
for Raydium touchscreens.

[1] https://docs.microsoft.com/en-us/windows-hardware/drivers/usbcon/usb-test-tools

Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
---
 drivers/usb/core/quirks.c | 5 +++++
 1 file changed, 5 insertions(+)

Patch
diff mbox series

diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c
index 178d6c6063c0..99f525ac4b2e 100644
--- a/drivers/usb/core/quirks.c
+++ b/drivers/usb/core/quirks.c
@@ -411,6 +411,11 @@  static const struct usb_device_id usb_quirk_list[] = {
 	{ USB_DEVICE(0x2040, 0x7200), .driver_info =
 			USB_QUIRK_CONFIG_INTF_STRINGS },
 
+	/* Raydium Touchscreen */
+	{ USB_DEVICE(0x2386, 0x3114), .driver_info = USB_QUIRK_NO_LPM },
+
+	{ USB_DEVICE(0x2386, 0x3119), .driver_info = USB_QUIRK_NO_LPM },
+
 	/* DJI CineSSD */
 	{ USB_DEVICE(0x2ca3, 0x0031), .driver_info = USB_QUIRK_NO_LPM },