[-next] USB: serial: mos7840: remove set but not used variables 'st, data1, iflag'
diff mbox series

Message ID 20181026122549.19036-1-yuehaibing@huawei.com
State Accepted
Commit 32d8a6fc5bd62769c7fa60818e0a32bd5126a565
Headers show
Series
  • [-next] USB: serial: mos7840: remove set but not used variables 'st, data1, iflag'
Related show

Commit Message

YueHaibing Oct. 26, 2018, 12:25 p.m. UTC
Fixes gcc '-Wunused-but-set-variable' warning:

drivers/usb/serial/mos7840.c: In function 'mos7840_interrupt_callback':
drivers/usb/serial/mos7840.c:604:14: warning:
 variable 'st' set but not used [-Wunused-but-set-variable]

drivers/usb/serial/mos7840.c: In function 'mos7840_write':
drivers/usb/serial/mos7840.c:1303:17: warning:
 variable 'data1' set but not used [-Wunused-but-set-variable]

drivers/usb/serial/mos7840.c:1700:11: warning:
 variable 'iflag' set but not used [-Wunused-but-set-variable]

They are never used since introduction in
commit 3f5429746d91 ("USB: Moschip 7840 USB-Serial Driver")

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
---
 drivers/usb/serial/mos7840.c | 7 +------
 1 file changed, 1 insertion(+), 6 deletions(-)

Comments

Johan Hovold Nov. 12, 2018, 9:35 a.m. UTC | #1
On Fri, Oct 26, 2018 at 08:25:49PM +0800, YueHaibing wrote:
> Fixes gcc '-Wunused-but-set-variable' warning:
> 
> drivers/usb/serial/mos7840.c: In function 'mos7840_interrupt_callback':
> drivers/usb/serial/mos7840.c:604:14: warning:
>  variable 'st' set but not used [-Wunused-but-set-variable]
> 
> drivers/usb/serial/mos7840.c: In function 'mos7840_write':
> drivers/usb/serial/mos7840.c:1303:17: warning:
>  variable 'data1' set but not used [-Wunused-but-set-variable]
> 
> drivers/usb/serial/mos7840.c:1700:11: warning:
>  variable 'iflag' set but not used [-Wunused-but-set-variable]
> 
> They are never used since introduction in
> commit 3f5429746d91 ("USB: Moschip 7840 USB-Serial Driver")
> 
> Signed-off-by: YueHaibing <yuehaibing@huawei.com>

Applied, thanks.

Johan

Patch
diff mbox series

diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c
index 88828b4..bfbf75b 100644
--- a/drivers/usb/serial/mos7840.c
+++ b/drivers/usb/serial/mos7840.c
@@ -601,7 +601,7 @@  static void mos7840_interrupt_callback(struct urb *urb)
 	struct usb_serial *serial;
 	__u16 Data;
 	unsigned char *data;
-	__u8 sp[5], st;
+	__u8 sp[5];
 	int i, rv = 0;
 	__u16 wval, wreg = 0;
 	int status = urb->status;
@@ -644,7 +644,6 @@  static void mos7840_interrupt_callback(struct urb *urb)
 	sp[1] = (__u8) data[1];
 	sp[2] = (__u8) data[2];
 	sp[3] = (__u8) data[3];
-	st = (__u8) data[4];
 
 	for (i = 0; i < serial->num_ports; i++) {
 		mos7840_port = mos7840_get_port_private(serial->port[i]);
@@ -1300,7 +1299,6 @@  static int mos7840_write(struct tty_struct *tty, struct usb_serial_port *port,
 	struct urb *urb;
 	/* __u16 Data; */
 	const unsigned char *current_position = data;
-	unsigned char *data1;
 
 	if (mos7840_port_paranoia_check(port, __func__))
 		return -1;
@@ -1361,7 +1359,6 @@  static int mos7840_write(struct tty_struct *tty, struct usb_serial_port *port,
 			mos7840_bulk_out_data_callback, mos7840_port);
 	}
 
-	data1 = urb->transfer_buffer;
 	dev_dbg(&port->dev, "bulkout endpoint is %d\n", port->bulk_out_endpointAddress);
 
 	if (mos7840_port->has_led)
@@ -1697,7 +1694,6 @@  static void mos7840_change_port_settings(struct tty_struct *tty,
 {
 	int baud;
 	unsigned cflag;
-	unsigned iflag;
 	__u8 lData;
 	__u8 lParity;
 	__u8 lStop;
@@ -1729,7 +1725,6 @@  static void mos7840_change_port_settings(struct tty_struct *tty,
 	lParity = LCR_PAR_NONE;
 
 	cflag = tty->termios.c_cflag;
-	iflag = tty->termios.c_iflag;
 
 	/* Change the number of bits */
 	switch (cflag & CSIZE) {