[PATCH 2/2] dt-binding: mediatek-dwmac: add binding document for MediaTek MT2712 DWMAC

From: Biao Huang <biao.huang@mediatek.com>
To: <davem@davemloft.net>, <robh+dt@kernel.org>
Cc: <honghui.zhang@mediatek.com>, <yt.shen@mediatek.com>,
	<liguo.zhang@mediatek.com>, <mark.rutland@arm.com>,
	<sean.wang@mediatek.com>, <nelson.chang@mediatek.com>,
	<matthias.bgg@gmail.com>, <biao.huang@mediatek.com>,
	<netdev@vger.kernel.org>, <devicetree@vger.kernel.org>,
	<linux-kernel@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-mediatek@lists.infradead.org>, <joabreu@synopsys.com>,
	<andrew@lunn.ch>
Subject: [PATCH 2/2] dt-binding: mediatek-dwmac: add binding document for MediaTek MT2712 DWMAC
Date: Mon, 29 Oct 2018 11:04:54 +0800	[thread overview]
Message-ID: <1540782294-27721-3-git-send-email-biao.huang@mediatek.com> (raw)
In-Reply-To: <1540782294-27721-1-git-send-email-biao.huang@mediatek.com>

The commit adds the device tree binding documentation for the MediaTek DWMAC
found on MediaTek MT2712.

Signed-off-by: Biao Huang <biao.huang@mediatek.com>
---
 .../devicetree/bindings/net/mediatek-dwmac.txt     |   49 ++++++++++++++++++++
 1 file changed, 49 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/net/mediatek-dwmac.txt

diff --git a/Documentation/devicetree/bindings/net/mediatek-dwmac.txt b/Documentation/devicetree/bindings/net/mediatek-dwmac.txt
new file mode 100644
index 0000000..8baf0e4
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/mediatek-dwmac.txt
@@ -0,0 +1,49 @@
+MediaTek DWMAC glue layer controller
+
+This file documents platform glue layer for stmmac.
+Please see stmmac.txt for the other unchanged properties.
+
+The device node has following properties.
+
+Required properties:
+- compatible:  Should be "mediatek,mt2712-gmac" for MT2712 SoC
+- reg:  Address and length of the register set for the device
+- interrupts:  Should contain the MAC interrupts
+- interrupt-names: Should contain a list of interrupt names corresponding to
+	the interrupts in the interrupts property, if available.
+	Should be "macirq" for the main MAC IRQ
+- clocks: Must contain a phandle for each entry in clock-names.
+- clock-names: the name of the clock listed in the clocks property. These are
+	"axi", "apb", "mac_ext", "mac_parent", "ptp_ref", "ptp_parent", "ptp_top"
+	for MT2712 SoC
+- mac-address: See ethernet.txt in the same directory
+- phy-mode: See ethernet.txt in the same directory
+
+Example:
+
+	eth: ethernet@1101c000 {
+		compatible = "mediatek,mt2712-gmac";
+		reg = <0 0x1101c000 0 0x1300>;
+		interrupts = <GIC_SPI 237 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "macirq";
+		phy-mode ="rgmii-id";
+		mac-address = [00 55 7b b5 7d f7];
+		clock-names = "axi",
+			      "apb",
+			      "mac_ext",
+			      "mac_parent",
+			      "ptp_ref",
+			      "ptp_parent",
+			      "ptp_top";
+		clocks = <&pericfg CLK_PERI_GMAC>,
+			 <&pericfg CLK_PERI_GMAC_PCLK>,
+			 <&topckgen CLK_TOP_ETHER_125M_SEL>,
+			 <&topckgen CLK_TOP_ETHERPLL_125M>,
+			 <&topckgen CLK_TOP_ETHER_50M_SEL>,
+			 <&topckgen CLK_TOP_APLL1_D3>,
+			 <&topckgen CLK_TOP_APLL1>;
+		snps,txpbl = <32>;
+		snps,rxpbl = <32>;
+		snps,reset-gpio = <&pio 87 GPIO_ACTIVE_LOW>;
+		snps,reset-active-low;
+	};
-- 
1.7.9.5

