From: Pascal PAILLET-LME <p.paillet@st.com>
To: "dmitry.torokhov@gmail.com" <dmitry.torokhov@gmail.com>,
"robh+dt@kernel.org" <robh+dt@kernel.org>,
"mark.rutland@arm.com" <mark.rutland@arm.com>,
"lee.jones@linaro.org" <lee.jones@linaro.org>,
"lgirdwood@gmail.com" <lgirdwood@gmail.com>,
"broonie@kernel.org" <broonie@kernel.org>,
"wim@linux-watchdog.org" <wim@linux-watchdog.org>,
"linux@roeck-us.net" <linux@roeck-us.net>,
"linux-input@vger.kernel.org" <linux-input@vger.kernel.org>,
"devicetree@vger.kernel.org" <devicetree@vger.kernel.org>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
"linux-watchdog@vger.kernel.org" <linux-watchdog@vger.kernel.org>,
"benjamin.gaignard@linaro.org" <benjamin.gaignard@linaro.org>,
"eballetbo@gmail.com" <eballetbo@gmail.com>,
"axel.lin@ingics.com" <axel.lin@ingics.com>
Cc: Pascal PAILLET-LME <p.paillet@st.com>
Subject: [PATCH v5 1/8] dt-bindings: mfd: document stpmic1
Date: Mon, 29 Oct 2018 16:22:04 +0000 [thread overview]
Message-ID: <1540830122-2577-2-git-send-email-p.paillet@st.com> (raw)
In-Reply-To: <1540830122-2577-1-git-send-email-p.paillet@st.com>
stpmic1 is a pmic from STMicroelectronics. The STPMIC1 integrates 10
regulators, 3 power switches, a watchdog and an input for a power on key.
Signed-off-by: Pascal Paillet <p.paillet@st.com>
---
changes in v5:
* removed st properties
* added buck modes definitions in the header
.../devicetree/bindings/mfd/st,stpmic1.txt | 61 ++++++++++++++++++++++
include/dt-bindings/mfd/st,stpmic1.h | 50 ++++++++++++++++++
2 files changed, 111 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mfd/st,stpmic1.txt
create mode 100644 include/dt-bindings/mfd/st,stpmic1.h
diff --git a/Documentation/devicetree/bindings/mfd/st,stpmic1.txt b/Documentation/devicetree/bindings/mfd/st,stpmic1.txt
new file mode 100644
index 0000000..afd45c0
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/st,stpmic1.txt
@@ -0,0 +1,61 @@
+* STMicroelectronics STPMIC1 Power Management IC
+
+Required properties:
+- compatible: : "st,stpmic1"
+- reg: : The I2C slave address for the STPMIC1 chip.
+- interrupts: : The interrupt line the device is connected to.
+- #interrupt-cells: : Should be 1.
+- interrupt-controller: : Marks the device node as an interrupt controller.
+ Interrupt numbers are defined at
+ dt-bindings/mfd/st,stpmic1.h.
+
+STPMIC1 consists in a varied group of sub-devices.
+Each sub-device binding is be described in own documentation file.
+
+Device Description
+------ ------------
+st,stpmic1-onkey : Power on key, see ../input/st,stpmic1-onkey.txt
+st,stpmic1-regulators : Regulators, see ../regulator/st,stpmic1-regulator.txt
+st,stpmic1-wdt : Watchdog, see ../watchdog/st,stpmic1-wdt.txt
+
+Example:
+
+#include <dt-bindings/mfd/st,stpmic1.h>
+
+pmic: pmic@33 {
+ compatible = "st,stpmic1";
+ reg = <0x33>;
+ interrupt-parent = <&gpioa>;
+ interrupts = <0 2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ onkey {
+ compatible = "st,stpmic1-onkey";
+ interrupts = <IT_PONKEY_F 0>,<IT_PONKEY_R 1>;
+ interrupt-names = "onkey-falling", "onkey-rising";
+ power-off-time-sec = <10>;
+ };
+
+ watchdog {
+ compatible = "st,stpmic1-wdt";
+ };
+
+ regulators {
+ compatible = "st,stpmic1-regulators";
+
+ vdd_core: buck1 {
+ regulator-name = "vdd_core";
+ regulator-boot-on;
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1200000>;
+ };
+ vdd: buck3 {
+ regulator-name = "vdd";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-pull-down;
+ };
+ };
diff --git a/include/dt-bindings/mfd/st,stpmic1.h b/include/dt-bindings/mfd/st,stpmic1.h
new file mode 100644
index 0000000..321cd087
--- /dev/null
+++ b/include/dt-bindings/mfd/st,stpmic1.h
@@ -0,0 +1,50 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) STMicroelectronics 2018 - All Rights Reserved
+ * Author: Philippe Peurichard <philippe.peurichard@st.com>,
+ * Pascal Paillet <p.paillet@st.com> for STMicroelectronics.
+ */
+
+#ifndef __DT_BINDINGS_STPMIC1_H__
+#define __DT_BINDINGS_STPMIC1_H__
+
+/* IRQ definitions */
+#define IT_PONKEY_F 0
+#define IT_PONKEY_R 1
+#define IT_WAKEUP_F 2
+#define IT_WAKEUP_R 3
+#define IT_VBUS_OTG_F 4
+#define IT_VBUS_OTG_R 5
+#define IT_SWOUT_F 6
+#define IT_SWOUT_R 7
+
+#define IT_CURLIM_BUCK1 8
+#define IT_CURLIM_BUCK2 9
+#define IT_CURLIM_BUCK3 10
+#define IT_CURLIM_BUCK4 11
+#define IT_OCP_OTG 12
+#define IT_OCP_SWOUT 13
+#define IT_OCP_BOOST 14
+#define IT_OVP_BOOST 15
+
+#define IT_CURLIM_LDO1 16
+#define IT_CURLIM_LDO2 17
+#define IT_CURLIM_LDO3 18
+#define IT_CURLIM_LDO4 19
+#define IT_CURLIM_LDO5 20
+#define IT_CURLIM_LDO6 21
+#define IT_SHORT_SWOTG 22
+#define IT_SHORT_SWOUT 23
+
+#define IT_TWARN_F 24
+#define IT_TWARN_R 25
+#define IT_VINLOW_F 26
+#define IT_VINLOW_R 27
+#define IT_SWIN_F 30
+#define IT_SWIN_R 31
+
+/* BUCK MODES definitions */
+#define STPMIC1_BUCK_MODE_NORMAL 0
+#define STPMIC1_BUCK_MODE_LP 2
+
+#endif /* __DT_BINDINGS_STPMIC1_H__ */
--
1.9.1
next prev parent reply other threads:[~2018-10-29 16:22 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-10-29 16:22 [PATCH v5 0/8] Introduce STPMIC1 PMIC Driver Pascal PAILLET-LME
2018-10-29 16:22 ` Pascal PAILLET-LME [this message]
2018-10-30 19:32 ` [PATCH v5 1/8] dt-bindings: mfd: document stpmic1 Rob Herring
2018-11-13 7:29 ` Lee Jones
2018-10-29 16:22 ` [PATCH v5 2/8] mfd: stpmic1: add stpmic1 driver Pascal PAILLET-LME
2018-11-13 7:40 ` Lee Jones
2018-11-26 17:20 ` Pascal PAILLET-LME
2018-11-27 8:57 ` Lee Jones
2018-10-29 16:22 ` [PATCH v5 3/8] dt-bindings: regulator: document stpmic1 pmic regulators Pascal PAILLET-LME
2018-10-30 19:34 ` Rob Herring
2018-10-29 16:22 ` [PATCH v5 4/8] regulator: stpmic1: add stpmic1 regulator driver Pascal PAILLET-LME
2018-10-29 16:22 ` [PATCH v5 5/8] dt-bindings: input: document stpmic1 pmic onkey Pascal PAILLET-LME
2018-10-29 16:22 ` [PATCH v5 6/8] input: stpmic1: add stpmic1 onkey driver Pascal PAILLET-LME
2018-10-29 16:22 ` [PATCH v5 8/8] watchdog: stpmic1: add stpmic1 watchdog driver Pascal PAILLET-LME
2018-10-30 13:17 ` Guenter Roeck
2018-10-29 16:22 ` [PATCH v5 7/8] dt-bindings: watchdog: document stpmic1 pmic watchdog Pascal PAILLET-LME
2018-10-30 13:17 ` Guenter Roeck
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1540830122-2577-2-git-send-email-p.paillet@st.com \
--to=p.paillet@st.com \
--cc=axel.lin@ingics.com \
--cc=benjamin.gaignard@linaro.org \
--cc=broonie@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dmitry.torokhov@gmail.com \
--cc=eballetbo@gmail.com \
--cc=lee.jones@linaro.org \
--cc=lgirdwood@gmail.com \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-watchdog@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=mark.rutland@arm.com \
--cc=robh+dt@kernel.org \
--cc=wim@linux-watchdog.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).