From: Emil Renner Berthing <esmil@mailme.dk>
To: linux-spi@vger.kernel.org
Cc: Emil Renner Berthing <kernel@esmil.dk>,
Addy Ke <addy.ke@rock-chips.com>, Mark Brown <broonie@kernel.org>,
Heiko Stuebner <heiko@sntech.de>,
linux-arm-kernel@lists.infradead.org,
linux-rockchip@lists.infradead.org, linux-kernel@vger.kernel.org
Subject: [PATCH v1 05/14] spi: rockchip: disable spi on error
Date: Wed, 31 Oct 2018 11:57:02 +0100 [thread overview]
Message-ID: <20181031105711.19575-6-esmil@mailme.dk> (raw)
In-Reply-To: <20181031105711.19575-1-esmil@mailme.dk>
From: Emil Renner Berthing <kernel@esmil.dk>
Successful transfers leave the spi disabled, so if
we just make sure to disable the spi on error
there should be no need to disable the spi from
master->unprepare_message.
This also flushes the tx and rx fifos,
so no need to do that manually.
Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
---
drivers/spi/spi-rockchip.c | 30 +++++-------------------------
1 file changed, 5 insertions(+), 25 deletions(-)
diff --git a/drivers/spi/spi-rockchip.c b/drivers/spi/spi-rockchip.c
index 1c813797f963..5729e6071729 100644
--- a/drivers/spi/spi-rockchip.c
+++ b/drivers/spi/spi-rockchip.c
@@ -210,12 +210,6 @@ static inline void spi_set_clk(struct rockchip_spi *rs, u16 div)
writel_relaxed(div, rs->regs + ROCKCHIP_SPI_BAUDR);
}
-static inline void flush_fifo(struct rockchip_spi *rs)
-{
- while (readl_relaxed(rs->regs + ROCKCHIP_SPI_RXFLR))
- readl_relaxed(rs->regs + ROCKCHIP_SPI_RXDR);
-}
-
static inline void wait_for_idle(struct rockchip_spi *rs)
{
unsigned long timeout = jiffies + msecs_to_jiffies(5);
@@ -304,29 +298,16 @@ static void rockchip_spi_handle_err(struct spi_master *master,
{
struct rockchip_spi *rs = spi_master_get_devdata(master);
- /*
- * For DMA mode, we need terminate DMA channel and flush
- * fifo for the next transfer if DMA thansfer timeout.
- * handle_err() was called by core if transfer failed.
- * Maybe it is reasonable for error handling here.
+ /* stop running spi transfer
+ * this also flushes both rx and tx fifos
*/
+ spi_enable_chip(rs, false);
+
if (atomic_read(&rs->state) & TXDMA)
dmaengine_terminate_async(rs->dma_tx.ch);
- if (atomic_read(&rs->state) & RXDMA) {
+ if (atomic_read(&rs->state) & RXDMA)
dmaengine_terminate_async(rs->dma_rx.ch);
- flush_fifo(rs);
- }
-}
-
-static int rockchip_spi_unprepare_message(struct spi_master *master,
- struct spi_message *msg)
-{
- struct rockchip_spi *rs = spi_master_get_devdata(master);
-
- spi_enable_chip(rs, false);
-
- return 0;
}
static void rockchip_spi_pio_writer(struct rockchip_spi *rs)
@@ -705,7 +686,6 @@ static int rockchip_spi_probe(struct platform_device *pdev)
master->set_cs = rockchip_spi_set_cs;
master->prepare_message = rockchip_spi_prepare_message;
- master->unprepare_message = rockchip_spi_unprepare_message;
master->transfer_one = rockchip_spi_transfer_one;
master->max_transfer_size = rockchip_spi_max_transfer_size;
master->handle_err = rockchip_spi_handle_err;
--
2.19.1
next prev parent reply other threads:[~2018-10-31 10:58 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-10-31 10:56 [PATCH v1 00/14] Rockchip SPI cleanup and use interrupts Emil Renner Berthing
2018-10-31 10:56 ` [PATCH v1 01/14] spi: rockchip: make spi_enable_chip take bool Emil Renner Berthing
2018-11-05 12:06 ` Applied "spi: rockchip: make spi_enable_chip take bool" to the spi tree Mark Brown
2018-10-31 10:56 ` [PATCH v1 02/14] spi: rockchip: use designated init for dma config Emil Renner Berthing
2018-11-05 12:06 ` Applied "spi: rockchip: use designated init for dma config" to the spi tree Mark Brown
2018-10-31 10:57 ` [PATCH v1 03/14] spi: rockchip: always use SPI mode Emil Renner Berthing
2018-11-05 12:06 ` Applied "spi: rockchip: always use SPI mode" to the spi tree Mark Brown
2018-10-31 10:57 ` [PATCH v1 04/14] spi: rockchip: use atomic_t state Emil Renner Berthing
2018-11-05 12:06 ` Applied "spi: rockchip: use atomic_t state" to the spi tree Mark Brown
2018-10-31 10:57 ` Emil Renner Berthing [this message]
2018-11-05 12:06 ` Applied "spi: rockchip: disable spi on error" " Mark Brown
2018-10-31 10:57 ` [PATCH v1 06/14] spi: rockchip: read transfer info directly Emil Renner Berthing
2018-11-05 12:06 ` Applied "spi: rockchip: read transfer info directly" to the spi tree Mark Brown
2018-10-31 10:57 ` [PATCH v1 07/14] spi: rockchip: don't store dma channels twice Emil Renner Berthing
2018-11-05 12:06 ` Applied "spi: rockchip: don't store dma channels twice" to the spi tree Mark Brown
2018-10-31 10:57 ` [PATCH v1 08/14] spi: rockchip: remove master pointer from dev data Emil Renner Berthing
2018-11-05 12:06 ` Applied "spi: rockchip: remove master pointer from dev data" to the spi tree Mark Brown
2018-10-31 10:57 ` [PATCH v1 09/14] spi: rockchip: simplify use_dma logic Emil Renner Berthing
2018-11-05 12:06 ` Applied "spi: rockchip: simplify use_dma logic" to the spi tree Mark Brown
2018-10-31 10:57 ` [PATCH v1 10/14] spi: rockchip: set min/max speed Emil Renner Berthing
2018-11-05 12:06 ` Applied "spi: rockchip: set min/max speed" to the spi tree Mark Brown
2018-10-31 10:57 ` [PATCH v1 11/14] spi: rockchip: precompute rx sample delay Emil Renner Berthing
2018-11-05 12:06 ` Applied "spi: rockchip: precompute rx sample delay" to the spi tree Mark Brown
2018-10-31 10:57 ` [PATCH v1 12/14] spi: rockchip: use irq rather than polling Emil Renner Berthing
2018-11-05 12:06 ` Applied "spi: rockchip: use irq rather than polling" to the spi tree Mark Brown
2018-10-31 10:57 ` [PATCH v1 13/14] spi: rockchip: support 4bit words Emil Renner Berthing
2018-11-05 12:06 ` Applied "spi: rockchip: support 4bit words" to the spi tree Mark Brown
2018-10-31 10:57 ` [PATCH v1 14/14] spi: rockchip: support lsb-first mode Emil Renner Berthing
2018-11-05 12:06 ` Applied "spi: rockchip: support lsb-first mode" to the spi tree Mark Brown
2018-10-31 11:20 ` [PATCH v1 00/14] Rockchip SPI cleanup and use interrupts Heiko Stübner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181031105711.19575-6-esmil@mailme.dk \
--to=esmil@mailme.dk \
--cc=addy.ke@rock-chips.com \
--cc=broonie@kernel.org \
--cc=heiko@sntech.de \
--cc=kernel@esmil.dk \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=linux-spi@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).