From: Xiaowei Bao <xiaowei.bao@nxp.com>
To: bhelgaas@google.com, robh+dt@kernel.org, mark.rutland@arm.com,
shawnguo@kernel.org, leoyang.li@nxp.com, kishon@ti.com,
lorenzo.pieralisi@arm.com, arnd@arndb.de,
gregkh@linuxfoundation.org, minghuan.Lian@nxp.com,
mingkai.hu@nxp.com, roy.zang@nxp.com,
kstewart@linuxfoundation.org, cyrille.pitchen@free-electrons.com,
pombredanne@nexb.com, shawn.lin@rock-chips.com,
niklas.cassel@axis.com, linux-pci@vger.kernel.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linuxppc-dev@lists.ozlabs.org
Cc: Bao Xiaowei <xiaowei.bao@nxp.com>
Subject: [PATCHv2 1/6] arm64: dts: Add the status property disable PCIe
Date: Mon, 5 Nov 2018 16:46:48 +0800 [thread overview]
Message-ID: <20181105084653.26597-1-xiaowei.bao@nxp.com> (raw)
From: Bao Xiaowei <xiaowei.bao@nxp.com>
Add the status property disable the PCIe, the property will be enable
by bootloader.
Signed-off-by: Bao Xiaowei <xiaowei.bao@nxp.com>
---
v2:
- no change
arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi | 1 +
arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 3 +++
arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi | 3 +++
arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi | 3 +++
arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi | 4 ++++
5 files changed, 14 insertions(+), 0 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
index 5da732f..21f2b3b 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
@@ -496,6 +496,7 @@
<0000 0 0 2 &gic 0 111 IRQ_TYPE_LEVEL_HIGH>,
<0000 0 0 3 &gic 0 112 IRQ_TYPE_LEVEL_HIGH>,
<0000 0 0 4 &gic 0 113 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
};
};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
index 3fed504..760d510 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
@@ -683,6 +683,7 @@
<0000 0 0 2 &gic 0 111 0x4>,
<0000 0 0 3 &gic 0 112 0x4>,
<0000 0 0 4 &gic 0 113 0x4>;
+ status = "disabled";
};
pcie@3500000 {
@@ -708,6 +709,7 @@
<0000 0 0 2 &gic 0 121 0x4>,
<0000 0 0 3 &gic 0 122 0x4>,
<0000 0 0 4 &gic 0 123 0x4>;
+ status = "disabled";
};
pcie@3600000 {
@@ -733,6 +735,7 @@
<0000 0 0 2 &gic 0 155 0x4>,
<0000 0 0 3 &gic 0 156 0x4>,
<0000 0 0 4 &gic 0 157 0x4>;
+ status = "disabled";
};
};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
index 51cbd50..64d334c 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
@@ -652,6 +652,7 @@
<0000 0 0 2 &gic GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
<0000 0 0 3 &gic GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
<0000 0 0 4 &gic GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
};
pcie@3500000 {
@@ -677,6 +678,7 @@
<0000 0 0 2 &gic GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
<0000 0 0 3 &gic GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
<0000 0 0 4 &gic GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
};
pcie@3600000 {
@@ -702,6 +704,7 @@
<0000 0 0 2 &gic GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>,
<0000 0 0 3 &gic GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>,
<0000 0 0 4 &gic GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
};
};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
index a07f612..9deb9cb 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
@@ -533,6 +533,7 @@
<0000 0 0 2 &gic 0 0 0 110 IRQ_TYPE_LEVEL_HIGH>,
<0000 0 0 3 &gic 0 0 0 111 IRQ_TYPE_LEVEL_HIGH>,
<0000 0 0 4 &gic 0 0 0 112 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
};
pcie@3500000 {
@@ -557,6 +558,7 @@
<0000 0 0 2 &gic 0 0 0 115 IRQ_TYPE_LEVEL_HIGH>,
<0000 0 0 3 &gic 0 0 0 116 IRQ_TYPE_LEVEL_HIGH>,
<0000 0 0 4 &gic 0 0 0 117 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
};
pcie@3600000 {
@@ -581,6 +583,7 @@
<0000 0 0 2 &gic 0 0 0 120 IRQ_TYPE_LEVEL_HIGH>,
<0000 0 0 3 &gic 0 0 0 121 IRQ_TYPE_LEVEL_HIGH>,
<0000 0 0 4 &gic 0 0 0 122 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
};
cluster1_core0_watchdog: wdt@c000000 {
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
index d188774..5732e3b 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
@@ -648,6 +648,7 @@
<0000 0 0 2 &gic 0 0 0 110 4>,
<0000 0 0 3 &gic 0 0 0 111 4>,
<0000 0 0 4 &gic 0 0 0 112 4>;
+ status = "disabled";
};
pcie2: pcie@3500000 {
@@ -669,6 +670,7 @@
<0000 0 0 2 &gic 0 0 0 115 4>,
<0000 0 0 3 &gic 0 0 0 116 4>,
<0000 0 0 4 &gic 0 0 0 117 4>;
+ status = "disabled";
};
pcie3: pcie@3600000 {
@@ -690,6 +692,7 @@
<0000 0 0 2 &gic 0 0 0 120 4>,
<0000 0 0 3 &gic 0 0 0 121 4>,
<0000 0 0 4 &gic 0 0 0 122 4>;
+ status = "disabled";
};
pcie4: pcie@3700000 {
@@ -711,6 +714,7 @@
<0000 0 0 2 &gic 0 0 0 125 4>,
<0000 0 0 3 &gic 0 0 0 126 4>,
<0000 0 0 4 &gic 0 0 0 127 4>;
+ status = "disabled";
};
sata0: sata@3200000 {
--
1.7.1
next reply other threads:[~2018-11-05 8:51 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-11-05 8:46 Xiaowei Bao [this message]
2018-11-05 8:46 ` [PATCHv2 2/6] ARM: dts: ls1021a: Add the status property disable PCIe Xiaowei Bao
2018-11-16 2:51 ` Shawn Guo
2018-11-16 2:53 ` Xiaowei Bao
2018-11-05 8:46 ` [PATCHv2 3/6] PCI: layerscape: Add the EP mode support Xiaowei Bao
2018-11-05 22:17 ` Rob Herring
2018-11-30 10:55 ` Lorenzo Pieralisi
2018-12-03 4:10 ` Xiaowei Bao
2018-11-05 8:46 ` [PATCHv2 4/6] arm64: dts: Add the PCIE EP node in dts Xiaowei Bao
2018-11-05 8:46 ` [PATCHv2 5/6] pci: layerscape: Add the EP mode support Xiaowei Bao
2018-11-30 16:22 ` Lorenzo Pieralisi
2018-12-03 4:08 ` Xiaowei Bao
2018-11-05 8:46 ` [PATCHv2 6/6] misc: pci_endpoint_test: Add the layerscape EP device support Xiaowei Bao
2018-11-16 2:49 ` [PATCHv2 1/6] arm64: dts: Add the status property disable PCIe Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181105084653.26597-1-xiaowei.bao@nxp.com \
--to=xiaowei.bao@nxp.com \
--cc=arnd@arndb.de \
--cc=bhelgaas@google.com \
--cc=cyrille.pitchen@free-electrons.com \
--cc=devicetree@vger.kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=kishon@ti.com \
--cc=kstewart@linuxfoundation.org \
--cc=leoyang.li@nxp.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=lorenzo.pieralisi@arm.com \
--cc=mark.rutland@arm.com \
--cc=minghuan.Lian@nxp.com \
--cc=mingkai.hu@nxp.com \
--cc=niklas.cassel@axis.com \
--cc=pombredanne@nexb.com \
--cc=robh+dt@kernel.org \
--cc=roy.zang@nxp.com \
--cc=shawn.lin@rock-chips.com \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).