[2/2] arm64: defconfig: Enable some qcom remoteproc configs
diff mbox series

Message ID 20181109061631.8245-2-vkoul@kernel.org
State New
Headers show
Series
  • [1/2] arm64: defconfig: Enable QCS404 configs
Related show

Commit Message

Vinod Koul Nov. 9, 2018, 6:16 a.m. UTC
From: Bjorn Andersson <bjorn.andersson@linaro.org>

Enable remoteproc configs to boot the remoteprocs on QC chipsets. These
are common configs and not specific to a specific SoC so should be enabled
across the board.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
---
 arch/arm64/configs/defconfig | 6 ++++++
 1 file changed, 6 insertions(+)

Comments

Bjorn Andersson Nov. 9, 2018, 6:27 a.m. UTC | #1
On Thu 08 Nov 22:16 PST 2018, Vinod Koul wrote:

> From: Bjorn Andersson <bjorn.andersson@linaro.org>
> 
> Enable remoteproc configs to boot the remoteprocs on QC chipsets. These
> are common configs and not specific to a specific SoC so should be enabled
> across the board.
> 
> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> Signed-off-by: Vinod Koul <vkoul@kernel.org>
> ---
>  arch/arm64/configs/defconfig | 6 ++++++
>  1 file changed, 6 insertions(+)
> 
> diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
> index b02da2e7a39a..b38d92c96c81 100644
> --- a/arch/arm64/configs/defconfig
> +++ b/arch/arm64/configs/defconfig
> @@ -614,9 +614,15 @@ CONFIG_TEGRA_IOMMU_SMMU=y
>  CONFIG_ARM_SMMU=y
>  CONFIG_ARM_SMMU_V3=y
>  CONFIG_QCOM_IOMMU=y
> +CONFIG_REMOTEPROC=m
> +CONFIG_QCOM_ADSP_PIL=m

This is now CONFIG_QCOM_Q6V5_PAS

> +CONFIG_QCOM_Q6V5_PIL=m

and CONFIG_QCOM_Q6V5_MSS

> +CONFIG_QCOM_SYSMON=m
>  CONFIG_RPMSG_QCOM_GLINK_RPM=y
> +CONFIG_RPMSG_QCOM_GLINK_SMEM=m
>  CONFIG_RPMSG_QCOM_SMD=y
>  CONFIG_RASPBERRYPI_POWER=y
> +CONFIG_QCOM_GLINK_SSR=m
>  CONFIG_QCOM_SMEM=y
>  CONFIG_QCOM_SMD_RPM=y
>  CONFIG_QCOM_SMP2P=y

Apart from that this looks good.

Regards,
Bjorn
Vinod Koul Nov. 9, 2018, 6:36 a.m. UTC | #2
On 08-11-18, 22:27, Bjorn Andersson wrote:
> On Thu 08 Nov 22:16 PST 2018, Vinod Koul wrote:
> 
> > From: Bjorn Andersson <bjorn.andersson@linaro.org>
> > 
> > Enable remoteproc configs to boot the remoteprocs on QC chipsets. These
> > are common configs and not specific to a specific SoC so should be enabled
> > across the board.
> > 
> > Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> > Signed-off-by: Vinod Koul <vkoul@kernel.org>
> > ---
> >  arch/arm64/configs/defconfig | 6 ++++++
> >  1 file changed, 6 insertions(+)
> > 
> > diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
> > index b02da2e7a39a..b38d92c96c81 100644
> > --- a/arch/arm64/configs/defconfig
> > +++ b/arch/arm64/configs/defconfig
> > @@ -614,9 +614,15 @@ CONFIG_TEGRA_IOMMU_SMMU=y
> >  CONFIG_ARM_SMMU=y
> >  CONFIG_ARM_SMMU_V3=y
> >  CONFIG_QCOM_IOMMU=y
> > +CONFIG_REMOTEPROC=m
> > +CONFIG_QCOM_ADSP_PIL=m
> 
> This is now CONFIG_QCOM_Q6V5_PAS
> 
> > +CONFIG_QCOM_Q6V5_PIL=m
> 
> and CONFIG_QCOM_Q6V5_MSS

Sure I will update this

Patch
diff mbox series

diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index b02da2e7a39a..b38d92c96c81 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -614,9 +614,15 @@  CONFIG_TEGRA_IOMMU_SMMU=y
 CONFIG_ARM_SMMU=y
 CONFIG_ARM_SMMU_V3=y
 CONFIG_QCOM_IOMMU=y
+CONFIG_REMOTEPROC=m
+CONFIG_QCOM_ADSP_PIL=m
+CONFIG_QCOM_Q6V5_PIL=m
+CONFIG_QCOM_SYSMON=m
 CONFIG_RPMSG_QCOM_GLINK_RPM=y
+CONFIG_RPMSG_QCOM_GLINK_SMEM=m
 CONFIG_RPMSG_QCOM_SMD=y
 CONFIG_RASPBERRYPI_POWER=y
+CONFIG_QCOM_GLINK_SSR=m
 CONFIG_QCOM_SMEM=y
 CONFIG_QCOM_SMD_RPM=y
 CONFIG_QCOM_SMP2P=y