[5/5] scsi: hisi_sas: change the time of SAS SSP connection
diff mbox series

Message ID 1541772396-161814-6-git-send-email-john.garry@huawei.com
State Accepted
Commit 15bc43f31a074076f114e0b87931e3b220b7bff1
Headers show
  • hisi_sas: Interrupt aggregation support
Related show

Commit Message

John Garry Nov. 9, 2018, 2:06 p.m. UTC
From: Xiang Chen <chenxiang66@hisilicon.com>

Currently the time of SAS SSP connection is 1ms, which means the link
connection will fail if no IO response after this period.

For some disks handling large IO (such as 512k), 1ms is not enough, so
change it to 5ms.

Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: John Garry <john.garry@huawei.com>
 drivers/scsi/hisi_sas/hisi_sas_v3_hw.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff mbox series

diff --git a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
index 0c3fa43..a677296 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
@@ -500,7 +500,7 @@  static void init_reg_v3_hw(struct hisi_hba *hisi_hba)
 		hisi_sas_phy_write32(hisi_hba, i, PHYCTRL_OOB_RESTART_MSK, 0x1);
 		hisi_sas_phy_write32(hisi_hba, i, STP_LINK_TIMER, 0x7f7a120);
 		hisi_sas_phy_write32(hisi_hba, i, CON_CFG_DRIVER, 0x2a0a01);
+		hisi_sas_phy_write32(hisi_hba, i, SAS_SSP_CON_TIMER_CFG, 0x32);
 		/* used for 12G negotiate */
 		hisi_sas_phy_write32(hisi_hba, i, COARSETUNE_TIME, 0x1e);
 		hisi_sas_phy_write32(hisi_hba, i, AIP_LIMIT, 0x2ffff);