From: Daniel Walker <danielwa@cisco.com>
To: Benjamin Herrenschmidt <benh@kernel.crashing.org>,
Paul Mackerras <paulus@samba.org>,
Michael Ellerman <mpe@ellerman.id.au>
Cc: Daniel Walker <dwalker@fifo99.com>,
xe-linux-external@cisco.com,
Maksym Kokhan <maksym.kokhan@globallogic.com>,
linuxppc-dev@lists.ozlabs.org, linux-kernel@vger.kernel.org
Subject: [PATCH 2/3] powerpc: convert to generic builtin command line
Date: Fri, 9 Nov 2018 09:34:32 -0800 [thread overview]
Message-ID: <20181109173433.1271-2-danielwa@cisco.com> (raw)
This updates the powerpc code to use the CONFIG_GENERIC_CMDLINE
option.
[maksym.kokhan@globallogic.com: add strlcat to prom_init_check.sh
whitelist]
Cc: Daniel Walker <dwalker@fifo99.com>
Cc: Daniel Walker <danielwa@cisco.com>
Cc: xe-linux-external@cisco.com
Signed-off-by: Daniel Walker <danielwa@cisco.com>
Signed-off-by: Maksym Kokhan <maksym.kokhan@globallogic.com>
---
arch/powerpc/Kconfig | 23 +----------------------
arch/powerpc/kernel/prom.c | 4 ++++
arch/powerpc/kernel/prom_init.c | 8 ++++----
arch/powerpc/kernel/prom_init_check.sh | 2 +-
4 files changed, 10 insertions(+), 27 deletions(-)
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 8be31261aec8..6321b2a0b87b 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -172,6 +172,7 @@ config PPC
select GENERIC_STRNCPY_FROM_USER
select GENERIC_STRNLEN_USER
select GENERIC_TIME_VSYSCALL
+ select GENERIC_CMDLINE
select HAVE_ARCH_AUDITSYSCALL
select HAVE_ARCH_JUMP_LABEL
select HAVE_ARCH_KGDB
@@ -777,28 +778,6 @@ config PPC_DENORMALISATION
Add support for handling denormalisation of single precision
values. Useful for bare metal only. If unsure say Y here.
-config CMDLINE_BOOL
- bool "Default bootloader kernel arguments"
-
-config CMDLINE
- string "Initial kernel command string"
- depends on CMDLINE_BOOL
- default "console=ttyS0,9600 console=tty0 root=/dev/sda2"
- help
- On some platforms, there is currently no way for the boot loader to
- pass arguments to the kernel. For these platforms, you can supply
- some command-line options at build time by entering them here. In
- most cases you will need to specify the root device here.
-
-config CMDLINE_FORCE
- bool "Always use the default kernel command string"
- depends on CMDLINE_BOOL
- help
- Always use the default kernel command string, even if the boot
- loader passes other arguments to the kernel.
- This is useful if you cannot or don't want to change the
- command-line options your boot loader passes to the kernel.
-
config EXTRA_TARGETS
string "Additional default image types"
help
diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c
index fe758cedb93f..d78b1d6fe1c8 100644
--- a/arch/powerpc/kernel/prom.c
+++ b/arch/powerpc/kernel/prom.c
@@ -34,6 +34,7 @@
#include <linux/of_fdt.h>
#include <linux/libfdt.h>
#include <linux/cpu.h>
+#include <linux/cmdline.h>
#include <asm/prom.h>
#include <asm/rtas.h>
@@ -716,6 +717,9 @@ void __init early_init_devtree(void *params)
*/
of_scan_flat_dt(early_init_dt_scan_chosen_ppc, boot_command_line);
+ /* append and prepend any arguments built into the kernel. */
+ cmdline_add_builtin(boot_command_line, NULL, COMMAND_LINE_SIZE);
+
/* Scan memory nodes and rebuild MEMBLOCKs */
of_scan_flat_dt(early_init_dt_scan_root, NULL);
of_scan_flat_dt(early_init_dt_scan_memory_ppc, NULL);
diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c
index f33ff4163a51..41393da56181 100644
--- a/arch/powerpc/kernel/prom_init.c
+++ b/arch/powerpc/kernel/prom_init.c
@@ -30,6 +30,7 @@
#include <linux/delay.h>
#include <linux/initrd.h>
#include <linux/bitops.h>
+#include <linux/cmdline.h>
#include <asm/prom.h>
#include <asm/rtas.h>
#include <asm/page.h>
@@ -637,11 +638,10 @@ static void __init early_cmdline_parse(void)
p = prom_cmd_line;
if ((long)prom.chosen > 0)
l = prom_getprop(prom.chosen, "bootargs", p, COMMAND_LINE_SIZE-1);
-#ifdef CONFIG_CMDLINE
+
if (l <= 0 || p[0] == '\0') /* dbl check */
- strlcpy(prom_cmd_line,
- CONFIG_CMDLINE, sizeof(prom_cmd_line));
-#endif /* CONFIG_CMDLINE */
+ cmdline_add_builtin(prom_cmd_line, NULL, sizeof(prom_cmd_line));
+
prom_printf("command line: %s\n", prom_cmd_line);
#ifdef CONFIG_PPC64
diff --git a/arch/powerpc/kernel/prom_init_check.sh b/arch/powerpc/kernel/prom_init_check.sh
index 667df97d2595..ab2acc8d8b5a 100644
--- a/arch/powerpc/kernel/prom_init_check.sh
+++ b/arch/powerpc/kernel/prom_init_check.sh
@@ -18,7 +18,7 @@
WHITELIST="add_reloc_offset __bss_start __bss_stop copy_and_flush
_end enter_prom memcpy memset reloc_offset __secondary_hold
-__secondary_hold_acknowledge __secondary_hold_spinloop __start
+__secondary_hold_acknowledge __secondary_hold_spinloop __start strlcat
strcmp strcpy strlcpy strlen strncmp strstr kstrtobool logo_linux_clut224
reloc_got2 kernstart_addr memstart_addr linux_banner _stext
__prom_init_toc_start __prom_init_toc_end btext_setup_display TOC."
--
2.14.1
next reply other threads:[~2018-11-09 17:34 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-11-09 17:34 Daniel Walker [this message]
2019-03-01 19:44 [PATCH 2/3] powerpc: convert to generic builtin command line Daniel Walker
2019-03-04 14:26 ` Christophe Leroy
2019-03-04 15:04 ` Christophe Leroy
2019-03-19 18:58 ` Daniel Walker
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181109173433.1271-2-danielwa@cisco.com \
--to=danielwa@cisco.com \
--cc=benh@kernel.crashing.org \
--cc=dwalker@fifo99.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=maksym.kokhan@globallogic.com \
--cc=mpe@ellerman.id.au \
--cc=paulus@samba.org \
--cc=xe-linux-external@cisco.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).