linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Waiman Long <longman@redhat.com>
To: "Luis R. Rodriguez" <mcgrof@kernel.org>,
	Kees Cook <keescook@chromium.org>,
	Andrew Morton <akpm@linux-foundation.org>,
	Jonathan Corbet <corbet@lwn.net>
Cc: linux-kernel@vger.kernel.org, linux-fsdevel@vger.kernel.org,
	linux-doc@vger.kernel.org, Al Viro <viro@zeniv.linux.org.uk>,
	Matthew Wilcox <willy@infradead.org>,
	"Eric W. Biederman" <ebiederm@xmission.com>,
	Takashi Iwai <tiwai@suse.de>, Davidlohr Bueso <dbueso@suse.de>,
	Manfred Spraul <manfred@colorfullife.com>,
	Waiman Long <longman@redhat.com>
Subject: [PATCH v11 1/3] ipc: Allow boot time extension of IPCMNI from 32k to 16M
Date: Fri,  9 Nov 2018 15:11:30 -0500	[thread overview]
Message-ID: <1541794292-19425-2-git-send-email-longman@redhat.com> (raw)
In-Reply-To: <1541794292-19425-1-git-send-email-longman@redhat.com>

The maximum number of unique System V IPC identifiers was limited to
32k.  That limit should be big enough for most use cases.

However, there are some users out there requesting for more, especially
those that are migrating from Solaris which uses 24 bits for unique
identifiers. To satisfy the need of those users, a new boot time kernel
option "ipcmni_extend" is added to extend the IPCMNI value to 16M. This
is a 512X increase which should be big enough for users out there that
need a large number of unique IPC identifier.

The use of this new option will change the pattern of the IPC identifiers
returned by functions like shmget(2). An application that depends on
such pattern may not work properly.  So it should only be used if the
users really need more than 32k of unique IPC numbers.

This new option does have the side effect of reducing the maximum number
of unique sequence numbers from 64k down to 128. So it is a trade-off.

The computation of a new IPC id is not done in the performance critical
path.  So a little bit of additional overhead shouldn't have any real
performance impact.

Signed-off-by: Waiman Long <longman@redhat.com>
---
 Documentation/admin-guide/kernel-parameters.txt |  3 ++
 ipc/ipc_sysctl.c                                | 12 ++++++-
 ipc/util.c                                      | 10 +++---
 ipc/util.h                                      | 44 ++++++++++++++++++++-----
 4 files changed, 54 insertions(+), 15 deletions(-)

diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
index 81d1d5a..93d1454 100644
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@@ -1799,6 +1799,9 @@
 	ip=		[IP_PNP]
 			See Documentation/filesystems/nfs/nfsroot.txt.
 
+	ipcmni_extend	[KNL] Extend the maximum number of unique System V
+			IPC identifiers from 32,768 to 16,777,216.
+
 	irqaffinity=	[SMP] Set the default irq affinity mask
 			The argument is a cpu list, as described above.
 
diff --git a/ipc/ipc_sysctl.c b/ipc/ipc_sysctl.c
index 49f9bf4..73b7782 100644
--- a/ipc/ipc_sysctl.c
+++ b/ipc/ipc_sysctl.c
@@ -120,7 +120,8 @@ static int proc_ipc_sem_dointvec(struct ctl_table *table, int write,
 static int zero;
 static int one = 1;
 static int int_max = INT_MAX;
-static int ipc_mni = IPCMNI;
+int ipc_mni = IPCMNI;
+int ipc_mni_shift = IPCMNI_SHIFT;
 
 static struct ctl_table ipc_kern_table[] = {
 	{
@@ -246,3 +247,12 @@ static int __init ipc_sysctl_init(void)
 }
 
 device_initcall(ipc_sysctl_init);
+
+static int __init ipc_mni_extend(char *str)
+{
+	ipc_mni = IPCMNI_EXTEND;
+	ipc_mni_shift = IPCMNI_EXTEND_SHIFT;
+	pr_info("IPCMNI extended to %d.\n", ipc_mni);
+	return 0;
+}
+early_param("ipcmni_extend", ipc_mni_extend);
diff --git a/ipc/util.c b/ipc/util.c
index 0af0575..07ae117 100644
--- a/ipc/util.c
+++ b/ipc/util.c
@@ -110,7 +110,7 @@ static int __init ipc_init(void)
  * @ids: ipc identifier set
  *
  * Set up the sequence range to use for the ipc identifier range (limited
- * below IPCMNI) then initialise the keys hashtable and ids idr.
+ * below ipc_mni) then initialise the keys hashtable and ids idr.
  */
 void ipc_init_ids(struct ipc_ids *ids)
 {
@@ -226,7 +226,7 @@ static inline int ipc_idr_alloc(struct ipc_ids *ids, struct kern_ipc_perm *new)
 				0, GFP_NOWAIT);
 	}
 	if (idx >= 0)
-		new->id = SEQ_MULTIPLIER * new->seq + idx;
+		new->id = (new->seq << IPCMNI_SEQ_SHIFT) + idx;
 	return idx;
 }
 
@@ -254,8 +254,8 @@ int ipc_addid(struct ipc_ids *ids, struct kern_ipc_perm *new, int limit)
 	/* 1) Initialize the refcount so that ipc_rcu_putref works */
 	refcount_set(&new->refcount, 1);
 
-	if (limit > IPCMNI)
-		limit = IPCMNI;
+	if (limit > ipc_mni)
+		limit = ipc_mni;
 
 	if (ids->in_use >= limit)
 		return -ENOSPC;
@@ -738,7 +738,7 @@ static struct kern_ipc_perm *sysvipc_find_ipc(struct ipc_ids *ids, loff_t pos,
 	if (total >= ids->in_use)
 		return NULL;
 
-	for (; pos < IPCMNI; pos++) {
+	for (; pos < ipc_mni; pos++) {
 		ipc = idr_find(&ids->ipcs_idr, pos);
 		if (ipc != NULL) {
 			*new_pos = pos + 1;
diff --git a/ipc/util.h b/ipc/util.h
index d768fdb..6a88d51 100644
--- a/ipc/util.h
+++ b/ipc/util.h
@@ -15,8 +15,34 @@
 #include <linux/err.h>
 #include <linux/ipc_namespace.h>
 
-#define IPCMNI 32768  /* <= MAX_INT limit for ipc arrays (including sysctl changes) */
-#define SEQ_MULTIPLIER	(IPCMNI)
+/*
+ * The IPC ID contains 2 separate numbers - index and sequence number.
+ * By default,
+ *   bits  0-14: index (32k, 15 bits)
+ *   bits 15-30: sequence number (64k, 16 bits)
+ *
+ * When IPCMNI extension mode is turned on, the composition changes:
+ *   bits  0-23: index (16M, 24 bits)
+ *   bits 24-30: sequence number (128, 7 bits)
+ */
+#define IPCMNI_SHIFT		15
+#define IPCMNI_EXTEND_SHIFT	24
+#define IPCMNI			(1 << IPCMNI_SHIFT)
+#define IPCMNI_EXTEND		(1 << IPCMNI_EXTEND_SHIFT)
+
+#ifdef CONFIG_SYSVIPC_SYSCTL
+extern int ipc_mni;
+extern int ipc_mni_shift;
+
+#define IPCMNI_SEQ_SHIFT	ipc_mni_shift
+#define IPCMNI_IDX_MASK		((1 << ipc_mni_shift) - 1)
+
+#else /* CONFIG_SYSVIPC_SYSCTL */
+
+#define ipc_mni			IPCMNI
+#define IPCMNI_SEQ_SHIFT	IPCMNI_SHIFT
+#define IPCMNI_IDX_MASK		((1 << IPCMNI_SHIFT) - 1)
+#endif /* CONFIG_SYSVIPC_SYSCTL */
 
 void sem_init(void);
 void msg_init(void);
@@ -96,9 +122,9 @@ void __init ipc_init_proc_interface(const char *path, const char *header,
 #define IPC_MSG_IDS	1
 #define IPC_SHM_IDS	2
 
-#define ipcid_to_idx(id) ((id) % SEQ_MULTIPLIER)
-#define ipcid_to_seqx(id) ((id) / SEQ_MULTIPLIER)
-#define IPCID_SEQ_MAX min_t(int, INT_MAX/SEQ_MULTIPLIER, USHRT_MAX)
+#define ipcid_to_idx(id)  ((id) & IPCMNI_IDX_MASK)
+#define ipcid_to_seqx(id) ((id) >> IPCMNI_SEQ_SHIFT)
+#define IPCID_SEQ_MAX	  (INT_MAX >> IPCMNI_SEQ_SHIFT)
 
 /* must be called with ids->rwsem acquired for writing */
 int ipc_addid(struct ipc_ids *, struct kern_ipc_perm *, int);
@@ -123,8 +149,8 @@ static inline int ipc_get_maxidx(struct ipc_ids *ids)
 	if (ids->in_use == 0)
 		return -1;
 
-	if (ids->in_use == IPCMNI)
-		return IPCMNI - 1;
+	if (ids->in_use == ipc_mni)
+		return ipc_mni - 1;
 
 	return ids->max_idx;
 }
@@ -219,10 +245,10 @@ void free_ipcs(struct ipc_namespace *ns, struct ipc_ids *ids,
 
 static inline int sem_check_semmni(struct ipc_namespace *ns) {
 	/*
-	 * Check semmni range [0, IPCMNI]
+	 * Check semmni range [0, ipc_mni]
 	 * semmni is the last element of sem_ctls[4] array
 	 */
-	return ((ns->sem_ctls[3] < 0) || (ns->sem_ctls[3] > IPCMNI))
+	return ((ns->sem_ctls[3] < 0) || (ns->sem_ctls[3] > ipc_mni))
 		? -ERANGE : 0;
 }
 
-- 
1.8.3.1


  reply	other threads:[~2018-11-09 20:11 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-11-09 20:11 [PATCH v11 0/3] ipc: Increase IPCMNI limit & IPC id generation modes Waiman Long
2018-11-09 20:11 ` Waiman Long [this message]
2018-11-20 19:45   ` [PATCH v11 1/3] ipc: Allow boot time extension of IPCMNI from 32k to 16M Manfred Spraul
2018-11-09 20:11 ` [PATCH v11 2/3] ipc: Conserve sequence numbers in ipcmni_extend mode Waiman Long
2018-11-10  7:41   ` Matthew Wilcox
2018-11-10 13:55     ` Waiman Long
2018-11-20 19:41     ` Manfred Spraul
     [not found]       ` <0dd6a66b-4c7f-5224-bcf9-646b3a012a10@redhat.com>
2019-03-10 12:47         ` Manfred Spraul
2018-11-09 20:11 ` [PATCH v11 3/3] ipc: Do cyclic id allocation with " Waiman Long

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1541794292-19425-2-git-send-email-longman@redhat.com \
    --to=longman@redhat.com \
    --cc=akpm@linux-foundation.org \
    --cc=corbet@lwn.net \
    --cc=dbueso@suse.de \
    --cc=ebiederm@xmission.com \
    --cc=keescook@chromium.org \
    --cc=linux-doc@vger.kernel.org \
    --cc=linux-fsdevel@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=manfred@colorfullife.com \
    --cc=mcgrof@kernel.org \
    --cc=tiwai@suse.de \
    --cc=viro@zeniv.linux.org.uk \
    --cc=willy@infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).