From: Jerome Brunet <jbrunet@baylibre.com>
To: Linus Walleij <linus.walleij@linaro.org>,
Kevin Hilman <khilman@baylibre.com>,
Carlo Caione <carlo@caione.org>
Cc: Jerome Brunet <jbrunet@baylibre.com>,
linux-gpio@vger.kernel.org, linux-amlogic@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: [PATCH] pinctrl: meson: fix pull enable register calculation
Date: Tue, 13 Nov 2018 11:55:36 +0100 [thread overview]
Message-ID: <20181113105536.6459-1-jbrunet@baylibre.com> (raw)
We just changed the code so we apply bias disable on the correct
register but forgot to align the register calculation. The result
is that we apply the change on the correct register, but possibly
at the incorrect offset/bit
This went undetected because offsets tends to be the same between
REG_PULL and REG_PULLEN for a given pin the EE controller. This
is not true for the AO controller.
Fixes: e39f9dd8206a ("pinctrl: meson: fix pinconf bias disable")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
---
drivers/pinctrl/meson/pinctrl-meson.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/pinctrl/meson/pinctrl-meson.c b/drivers/pinctrl/meson/pinctrl-meson.c
index 53d449076dee..ea87d739f534 100644
--- a/drivers/pinctrl/meson/pinctrl-meson.c
+++ b/drivers/pinctrl/meson/pinctrl-meson.c
@@ -191,7 +191,8 @@ static int meson_pinconf_set(struct pinctrl_dev *pcdev, unsigned int pin,
case PIN_CONFIG_BIAS_DISABLE:
dev_dbg(pc->dev, "pin %u: disable bias\n", pin);
- meson_calc_reg_and_bit(bank, pin, REG_PULL, ®, &bit);
+ meson_calc_reg_and_bit(bank, pin, REG_PULLEN, ®,
+ &bit);
ret = regmap_update_bits(pc->reg_pullen, reg,
BIT(bit), 0);
if (ret)
--
2.19.1
next reply other threads:[~2018-11-13 10:56 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-11-13 10:55 Jerome Brunet [this message]
2018-11-13 13:34 ` [PATCH] pinctrl: meson: fix pull enable register calculation Neil Armstrong
2018-11-19 13:18 ` Linus Walleij
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181113105536.6459-1-jbrunet@baylibre.com \
--to=jbrunet@baylibre.com \
--cc=carlo@caione.org \
--cc=khilman@baylibre.com \
--cc=linus.walleij@linaro.org \
--cc=linux-amlogic@lists.infradead.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).