linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Lucas Stach <l.stach@pengutronix.de>
To: Rob Herring <robh+dt@kernel.org>, Kishon Vijay Abraham I <kishon@ti.com>
Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	kernel@pengutronix.de, patchwork-lst@pengutronix.de
Subject: [PATCH 2/2] phy: add driver for Freescale i.MX8MQ USB3 PHY
Date: Thu, 15 Nov 2018 15:12:47 +0100	[thread overview]
Message-ID: <20181115141247.15221-2-l.stach@pengutronix.de> (raw)
In-Reply-To: <20181115141247.15221-1-l.stach@pengutronix.de>

From: Li Jun <jun.li@nxp.com>

This is a cleaned up port of the downstream i.MX8MQ USB3 PHY driver.

Signed-off-by: Li Jun <jun.li@nxp.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
---
 drivers/phy/Kconfig                        |   1 +
 drivers/phy/Makefile                       |   1 +
 drivers/phy/freescale/Kconfig              |   5 +
 drivers/phy/freescale/Makefile             |   1 +
 drivers/phy/freescale/phy-fsl-imx8mq-usb.c | 127 +++++++++++++++++++++
 5 files changed, 135 insertions(+)
 create mode 100644 drivers/phy/freescale/Kconfig
 create mode 100644 drivers/phy/freescale/Makefile
 create mode 100644 drivers/phy/freescale/phy-fsl-imx8mq-usb.c

diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
index 60f949e2a684..eaf0778a18d4 100644
--- a/drivers/phy/Kconfig
+++ b/drivers/phy/Kconfig
@@ -44,6 +44,7 @@ source "drivers/phy/allwinner/Kconfig"
 source "drivers/phy/amlogic/Kconfig"
 source "drivers/phy/broadcom/Kconfig"
 source "drivers/phy/cadence/Kconfig"
+source "drivers/phy/freescale/Kconfig"
 source "drivers/phy/hisilicon/Kconfig"
 source "drivers/phy/lantiq/Kconfig"
 source "drivers/phy/marvell/Kconfig"
diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
index 0301e25d07c1..84acb3761457 100644
--- a/drivers/phy/Makefile
+++ b/drivers/phy/Makefile
@@ -16,6 +16,7 @@ obj-$(CONFIG_ARCH_ROCKCHIP)		+= rockchip/
 obj-$(CONFIG_ARCH_TEGRA)		+= tegra/
 obj-y					+= broadcom/	\
 					   cadence/	\
+					   freescale/	\
 					   hisilicon/	\
 					   marvell/	\
 					   motorola/	\
diff --git a/drivers/phy/freescale/Kconfig b/drivers/phy/freescale/Kconfig
new file mode 100644
index 000000000000..ea1ac1651fbf
--- /dev/null
+++ b/drivers/phy/freescale/Kconfig
@@ -0,0 +1,5 @@
+config PHY_FSL_IMX8MQ_USB
+	tristate "Freescale i.MX8M USB3 PHY"
+	depends on OF
+	select GENERIC_PHY
+	default SOC_IMX8MQ
diff --git a/drivers/phy/freescale/Makefile b/drivers/phy/freescale/Makefile
new file mode 100644
index 000000000000..dc2b3f1f2f80
--- /dev/null
+++ b/drivers/phy/freescale/Makefile
@@ -0,0 +1 @@
+obj-$(CONFIG_PHY_FSL_IMX8MQ_USB)	+= phy-fsl-imx8mq-usb.o
diff --git a/drivers/phy/freescale/phy-fsl-imx8mq-usb.c b/drivers/phy/freescale/phy-fsl-imx8mq-usb.c
new file mode 100644
index 000000000000..d6ea5ce8afa5
--- /dev/null
+++ b/drivers/phy/freescale/phy-fsl-imx8mq-usb.c
@@ -0,0 +1,127 @@
+// SPDX-License-Identifier: GPL-2.0+
+/* Copyright (c) 2017 NXP. */
+
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+
+#define PHY_CTRL0			0x0
+#define PHY_CTRL0_REF_SSP_EN		BIT(2)
+
+#define PHY_CTRL1			0x4
+#define PHY_CTRL1_RESET			BIT(0)
+#define PHY_CTRL1_COMMONONN		BIT(1)
+#define PHY_CTRL1_ATERESET		BIT(3)
+#define PHY_CTRL1_VDATSRCENB0		BIT(19)
+#define PHY_CTRL1_VDATDETENB0		BIT(20)
+
+#define PHY_CTRL2			0x8
+#define PHY_CTRL2_TXENABLEN0		BIT(8)
+
+struct imx8mq_usb_phy {
+	struct phy *phy;
+	struct clk *clk;
+	void __iomem *base;
+};
+
+static int imx8mq_usb_phy_init(struct phy *phy)
+{
+	struct imx8mq_usb_phy *imx_phy = phy_get_drvdata(phy);
+	u32 value;
+
+	value = readl(imx_phy->base + PHY_CTRL1);
+	value &= ~(PHY_CTRL1_VDATSRCENB0 | PHY_CTRL1_VDATDETENB0 |
+		   PHY_CTRL1_COMMONONN);
+	value |= PHY_CTRL1_RESET | PHY_CTRL1_ATERESET;
+	writel(value, imx_phy->base + PHY_CTRL1);
+
+	value = readl(imx_phy->base + PHY_CTRL0);
+	value |= PHY_CTRL0_REF_SSP_EN;
+	writel(value, imx_phy->base + PHY_CTRL0);
+
+	value = readl(imx_phy->base + PHY_CTRL2);
+	value |= PHY_CTRL2_TXENABLEN0;
+	writel(value, imx_phy->base + PHY_CTRL2);
+
+	value = readl(imx_phy->base + PHY_CTRL1);
+	value &= ~(PHY_CTRL1_RESET | PHY_CTRL1_ATERESET);
+	writel(value, imx_phy->base + PHY_CTRL1);
+
+	return 0;
+}
+
+static int imx8mq_phy_power_on(struct phy *phy)
+{
+	struct imx8mq_usb_phy *imx_phy = phy_get_drvdata(phy);
+
+	return clk_prepare_enable(imx_phy->clk);
+}
+
+static int imx8mq_phy_power_off(struct phy *phy)
+{
+	struct imx8mq_usb_phy *imx_phy = phy_get_drvdata(phy);
+
+	clk_disable_unprepare(imx_phy->clk);
+
+	return 0;
+}
+
+static struct phy_ops imx8mq_usb_phy_ops = {
+	.init		= imx8mq_usb_phy_init,
+	.power_on	= imx8mq_phy_power_on,
+	.power_off	= imx8mq_phy_power_off,
+	.owner		= THIS_MODULE,
+};
+
+static int imx8mq_usb_phy_probe(struct platform_device *pdev)
+{
+	struct phy_provider *phy_provider;
+	struct device *dev = &pdev->dev;
+	struct imx8mq_usb_phy *imx_phy;
+	struct resource *res;
+
+	imx_phy = devm_kzalloc(dev, sizeof(*imx_phy), GFP_KERNEL);
+	if (!imx_phy)
+		return -ENOMEM;
+
+	imx_phy->clk = devm_clk_get(dev, "phy");
+	if (IS_ERR(imx_phy->clk)) {
+		dev_err(dev, "failed to get imx8mq usb phy clock\n");
+		return PTR_ERR(imx_phy->clk);
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	imx_phy->base = devm_ioremap_resource(dev, res);
+	if (IS_ERR(imx_phy->base))
+		return PTR_ERR(imx_phy->base);
+
+	imx_phy->phy = devm_phy_create(dev, NULL, &imx8mq_usb_phy_ops);
+	if (IS_ERR(imx_phy->phy))
+		return PTR_ERR(imx_phy->phy);
+
+	phy_set_drvdata(imx_phy->phy, imx_phy);
+
+	phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+
+	return PTR_ERR_OR_ZERO(phy_provider);
+}
+
+static const struct of_device_id imx8mq_usb_phy_of_match[] = {
+	{.compatible = "fsl,imx8mq-usb-phy",},
+	{ },
+};
+MODULE_DEVICE_TABLE(of, imx8mq_usb_phy_of_match);
+
+static struct platform_driver imx8mq_usb_phy_driver = {
+	.probe	= imx8mq_usb_phy_probe,
+	.driver = {
+		.name	= "imx8mq-usb-phy",
+		.of_match_table	= imx8mq_usb_phy_of_match,
+	}
+};
+module_platform_driver(imx8mq_usb_phy_driver);
+
+MODULE_DESCRIPTION("FSL IMX8MQ USB PHY driver");
+MODULE_LICENSE("GPL");
-- 
2.19.1


  reply	other threads:[~2018-11-15 14:13 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-11-15 14:12 [PATCH 1/2] dt-bindings: phy: add binding for Freescale i.MX8MQ USB3 PHY Lucas Stach
2018-11-15 14:12 ` Lucas Stach [this message]
2018-12-04 21:44 ` Rob Herring

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20181115141247.15221-2-l.stach@pengutronix.de \
    --to=l.stach@pengutronix.de \
    --cc=devicetree@vger.kernel.org \
    --cc=kernel@pengutronix.de \
    --cc=kishon@ti.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=patchwork-lst@pengutronix.de \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).