From: Viresh Kumar <viresh.kumar@linaro.org>
To: Mark Rutland <mark.rutland@arm.com>,
Rob Herring <robh+dt@kernel.org>, Kukjin Kim <kgene@kernel.org>,
Krzysztof Kozlowski <krzk@kernel.org>
Cc: Viresh Kumar <viresh.kumar@linaro.org>,
devicetree@vger.kernel.org,
Vincent Guittot <vincent.guittot@linaro.org>,
Daniel Lezcano <daniel.lezcano@linaro.org>,
linux-arm-kernel@lists.infradead.org,
linux-samsung-soc@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH 1/6] ARM: dts: exynos: Add all CPUs in cooling maps
Date: Fri, 16 Nov 2018 15:31:10 +0530 [thread overview]
Message-ID: <24d8433f544046eda4d21e8c7133e3bab770b615.1542362000.git.viresh.kumar@linaro.org> (raw)
In-Reply-To: <cover.1542362000.git.viresh.kumar@linaro.org>
Each CPU can (and does) participate in cooling down the system but the
DT only captures a handful of them, normally CPU0, in the cooling maps.
Things work by chance currently as under normal circumstances its the
first CPU of each cluster which is used by the operating systems to
probe the cooling devices. But as soon as this CPU ordering changes and
any other CPU is used to bring up the cooling device, we will start
seeing failures.
Also the DT is rather incomplete when we list only one CPU in the
cooling maps, as the hardware doesn't have any such limitations.
Update cooling maps to include all devices affected by individual trip
points.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
arch/arm/boot/dts/exynos3250-artik5.dtsi | 6 +-
arch/arm/boot/dts/exynos3250-monk.dts | 6 +-
arch/arm/boot/dts/exynos3250-rinato.dts | 6 +-
arch/arm/boot/dts/exynos4210-trats.dts | 4 +-
arch/arm/boot/dts/exynos4210.dtsi | 2 +-
.../boot/dts/exynos4412-itop-scp-core.dtsi | 8 +-
arch/arm/boot/dts/exynos4412-midas.dtsi | 8 +-
.../boot/dts/exynos4412-odroid-common.dtsi | 8 +-
arch/arm/boot/dts/exynos4412-odroidu3.dts | 17 ++-
arch/arm/boot/dts/exynos4412.dtsi | 6 +-
arch/arm/boot/dts/exynos5250.dtsi | 7 +-
arch/arm/boot/dts/exynos5422-odroidhc1.dts | 106 +++++++++++-------
.../boot/dts/exynos5422-odroidxu3-common.dtsi | 106 +++++++++++-------
13 files changed, 177 insertions(+), 113 deletions(-)
diff --git a/arch/arm/boot/dts/exynos3250-artik5.dtsi b/arch/arm/boot/dts/exynos3250-artik5.dtsi
index 7c22cbf6f3d4..ace50e194a45 100644
--- a/arch/arm/boot/dts/exynos3250-artik5.dtsi
+++ b/arch/arm/boot/dts/exynos3250-artik5.dtsi
@@ -36,11 +36,13 @@
cooling-maps {
map0 {
/* Corresponds to 500MHz */
- cooling-device = <&cpu0 5 5>;
+ cooling-device = <&cpu0 5 5>,
+ <&cpu1 5 5>;
};
map1 {
/* Corresponds to 200MHz */
- cooling-device = <&cpu0 8 8>;
+ cooling-device = <&cpu0 8 8>,
+ <&cpu1 8 8>;
};
};
};
diff --git a/arch/arm/boot/dts/exynos3250-monk.dts b/arch/arm/boot/dts/exynos3250-monk.dts
index 6ffedf4ed9f2..e25765500e99 100644
--- a/arch/arm/boot/dts/exynos3250-monk.dts
+++ b/arch/arm/boot/dts/exynos3250-monk.dts
@@ -121,11 +121,13 @@
cooling-maps {
map0 {
/* Correspond to 500MHz at freq_table */
- cooling-device = <&cpu0 5 5>;
+ cooling-device = <&cpu0 5 5>,
+ <&cpu1 5 5>;
};
map1 {
/* Correspond to 200MHz at freq_table */
- cooling-device = <&cpu0 8 8>;
+ cooling-device = <&cpu0 8 8>,
+ <&cpu1 8 8>;
};
};
};
diff --git a/arch/arm/boot/dts/exynos3250-rinato.dts b/arch/arm/boot/dts/exynos3250-rinato.dts
index 2a6b828c01b7..7479993755da 100644
--- a/arch/arm/boot/dts/exynos3250-rinato.dts
+++ b/arch/arm/boot/dts/exynos3250-rinato.dts
@@ -116,11 +116,13 @@
cooling-maps {
map0 {
/* Corresponds to 500MHz */
- cooling-device = <&cpu0 5 5>;
+ cooling-device = <&cpu0 5 5>,
+ <&cpu1 5 5>;
};
map1 {
/* Corresponds to 200MHz */
- cooling-device = <&cpu0 8 8>;
+ cooling-device = <&cpu0 8 8>,
+ <&cpu1 8 8>;
};
};
};
diff --git a/arch/arm/boot/dts/exynos4210-trats.dts b/arch/arm/boot/dts/exynos4210-trats.dts
index f9bbc6315cd9..8dbc47d627a5 100644
--- a/arch/arm/boot/dts/exynos4210-trats.dts
+++ b/arch/arm/boot/dts/exynos4210-trats.dts
@@ -138,11 +138,11 @@
cooling-maps {
map0 {
/* Corresponds to 800MHz at freq_table */
- cooling-device = <&cpu0 2 2>;
+ cooling-device = <&cpu0 2 2>, <&cpu1 2 2>;
};
map1 {
/* Corresponds to 200MHz at freq_table */
- cooling-device = <&cpu0 4 4>;
+ cooling-device = <&cpu0 4 4>, <&cpu1 4 4>;
};
};
};
diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi
index b6091c27f155..32ccb5fa14f1 100644
--- a/arch/arm/boot/dts/exynos4210.dtsi
+++ b/arch/arm/boot/dts/exynos4210.dtsi
@@ -51,7 +51,7 @@
#cooling-cells = <2>; /* min followed by max */
};
- cpu@901 {
+ cpu1: cpu@901 {
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <0x901>;
diff --git a/arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi b/arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi
index ab7affab7f1c..4ca05599ee2a 100644
--- a/arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi
+++ b/arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi
@@ -45,11 +45,15 @@
cooling-maps {
map0 {
/* Corresponds to 800MHz at freq_table */
- cooling-device = <&cpu0 7 7>;
+ cooling-device = <&cpu0 7 7>, <&cpu1 7 7>,
+ <&cpu2 7 7>, <&cpu3 7 7>;
};
map1 {
/* Corresponds to 200MHz at freq_table */
- cooling-device = <&cpu0 13 13>;
+ cooling-device = <&cpu0 13 13>,
+ <&cpu1 13 13>,
+ <&cpu2 13 13>,
+ <&cpu3 13 13>;
};
};
};
diff --git a/arch/arm/boot/dts/exynos4412-midas.dtsi b/arch/arm/boot/dts/exynos4412-midas.dtsi
index aed2f2e2b0d1..4c15cb616cdf 100644
--- a/arch/arm/boot/dts/exynos4412-midas.dtsi
+++ b/arch/arm/boot/dts/exynos4412-midas.dtsi
@@ -267,11 +267,15 @@
cooling-maps {
map0 {
/* Corresponds to 800MHz at freq_table */
- cooling-device = <&cpu0 7 7>;
+ cooling-device = <&cpu0 7 7>, <&cpu1 7 7>,
+ <&cpu2 7 7>, <&cpu3 7 7>;
};
map1 {
/* Corresponds to 200MHz at freq_table */
- cooling-device = <&cpu0 13 13>;
+ cooling-device = <&cpu0 13 13>,
+ <&cpu1 13 13>,
+ <&cpu2 13 13>,
+ <&cpu3 13 13>;
};
};
};
diff --git a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
index 2caa3132f34e..3a9eb1e91c45 100644
--- a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
+++ b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
@@ -72,11 +72,15 @@
cooling-maps {
cooling_map0: map0 {
/* Corresponds to 800MHz at freq_table */
- cooling-device = <&cpu0 7 7>;
+ cooling-device = <&cpu0 7 7>, <&cpu1 7 7>,
+ <&cpu2 7 7>, <&cpu3 7 7>;
};
cooling_map1: map1 {
/* Corresponds to 200MHz at freq_table */
- cooling-device = <&cpu0 13 13>;
+ cooling-device = <&cpu0 13 13>,
+ <&cpu1 13 13>,
+ <&cpu2 13 13>,
+ <&cpu3 13 13>;
};
};
};
diff --git a/arch/arm/boot/dts/exynos4412-odroidu3.dts b/arch/arm/boot/dts/exynos4412-odroidu3.dts
index 459919b65df8..d51d6978d413 100644
--- a/arch/arm/boot/dts/exynos4412-odroidu3.dts
+++ b/arch/arm/boot/dts/exynos4412-odroidu3.dts
@@ -45,24 +45,21 @@
cooling-maps {
map0 {
trip = <&cpu_alert1>;
- cooling-device = <&cpu0 9 9>;
+ cooling-device = <&cpu0 9 9>, <&cpu1 9 9>,
+ <&cpu2 9 9>, <&cpu3 9 9>, <&fan0 1 2>;
};
map1 {
trip = <&cpu_alert2>;
- cooling-device = <&cpu0 15 15>;
+ cooling-device = <&cpu0 15 15>,
+ <&cpu1 15 15>,
+ <&cpu2 15 15>,
+ <&cpu3 15 15>,
+ <&fan0 2 3>;
};
map2 {
trip = <&cpu_alert0>;
cooling-device = <&fan0 0 1>;
};
- map3 {
- trip = <&cpu_alert1>;
- cooling-device = <&fan0 1 2>;
- };
- map4 {
- trip = <&cpu_alert2>;
- cooling-device = <&fan0 2 3>;
- };
};
};
};
diff --git a/arch/arm/boot/dts/exynos4412.dtsi b/arch/arm/boot/dts/exynos4412.dtsi
index 51f72f0327e5..cd04bb4aea5f 100644
--- a/arch/arm/boot/dts/exynos4412.dtsi
+++ b/arch/arm/boot/dts/exynos4412.dtsi
@@ -45,7 +45,7 @@
#cooling-cells = <2>; /* min followed by max */
};
- cpu@a01 {
+ cpu1: cpu@a01 {
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <0xA01>;
@@ -55,7 +55,7 @@
#cooling-cells = <2>; /* min followed by max */
};
- cpu@a02 {
+ cpu2: cpu@a02 {
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <0xA02>;
@@ -65,7 +65,7 @@
#cooling-cells = <2>; /* min followed by max */
};
- cpu@a03 {
+ cpu3: cpu@a03 {
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <0xA03>;
diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi
index 5044f754e6e5..80986b97dfe5 100644
--- a/arch/arm/boot/dts/exynos5250.dtsi
+++ b/arch/arm/boot/dts/exynos5250.dtsi
@@ -59,7 +59,7 @@
operating-points-v2 = <&cpu0_opp_table>;
#cooling-cells = <2>; /* min followed by max */
};
- cpu@1 {
+ cpu1: cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a15";
reg = <1>;
@@ -1087,11 +1087,12 @@
cooling-maps {
map0 {
/* Corresponds to 800MHz at freq_table */
- cooling-device = <&cpu0 9 9>;
+ cooling-device = <&cpu0 9 9>, <&cpu1 9 9>;
};
map1 {
/* Corresponds to 200MHz at freq_table */
- cooling-device = <&cpu0 15 15>;
+ cooling-device = <&cpu0 15 15>,
+ <&cpu1 15 15>;
};
};
};
diff --git a/arch/arm/boot/dts/exynos5422-odroidhc1.dts b/arch/arm/boot/dts/exynos5422-odroidhc1.dts
index 8f332be143f7..d271e7548826 100644
--- a/arch/arm/boot/dts/exynos5422-odroidhc1.dts
+++ b/arch/arm/boot/dts/exynos5422-odroidhc1.dts
@@ -56,24 +56,30 @@
*/
map0 {
trip = <&cpu0_alert0>;
- cooling-device = <&cpu0 0 2>;
- };
- map1 {
- trip = <&cpu0_alert0>;
- cooling-device = <&cpu4 0 2>;
+ cooling-device = <&cpu0 0 2>,
+ <&cpu1 0 2>,
+ <&cpu2 0 2>,
+ <&cpu3 0 2>,
+ <&cpu4 0 2>,
+ <&cpu5 0 2>,
+ <&cpu6 0 2>,
+ <&cpu7 0 2>;
};
/*
* When reaching cpu0_alert1, reduce CPU
* further, down to 600 MHz (12 steps for big,
* 7 steps for LITTLE).
*/
- map2 {
- trip = <&cpu0_alert1>;
- cooling-device = <&cpu0 3 7>;
- };
- map3 {
+ map1 {
trip = <&cpu0_alert1>;
- cooling-device = <&cpu4 3 12>;
+ cooling-device = <&cpu0 3 7>,
+ <&cpu1 3 7>,
+ <&cpu2 3 7>,
+ <&cpu3 3 7>,
+ <&cpu4 3 12>,
+ <&cpu5 3 12>,
+ <&cpu6 3 12>,
+ <&cpu7 3 12>;
};
};
};
@@ -99,19 +105,25 @@
cooling-maps {
map0 {
trip = <&cpu1_alert0>;
- cooling-device = <&cpu0 0 2>;
+ cooling-device = <&cpu0 0 2>,
+ <&cpu1 0 2>,
+ <&cpu2 0 2>,
+ <&cpu3 0 2>,
+ <&cpu4 0 2>,
+ <&cpu5 0 2>,
+ <&cpu6 0 2>,
+ <&cpu7 0 2>;
};
map1 {
- trip = <&cpu1_alert0>;
- cooling-device = <&cpu4 0 2>;
- };
- map2 {
- trip = <&cpu1_alert1>;
- cooling-device = <&cpu0 3 7>;
- };
- map3 {
trip = <&cpu1_alert1>;
- cooling-device = <&cpu4 3 12>;
+ cooling-device = <&cpu0 3 7>,
+ <&cpu1 3 7>,
+ <&cpu2 3 7>,
+ <&cpu3 3 7>,
+ <&cpu4 3 12>,
+ <&cpu5 3 12>,
+ <&cpu6 3 12>,
+ <&cpu7 3 12>;
};
};
};
@@ -137,19 +149,25 @@
cooling-maps {
map0 {
trip = <&cpu2_alert0>;
- cooling-device = <&cpu0 0 2>;
+ cooling-device = <&cpu0 0 2>,
+ <&cpu1 0 2>,
+ <&cpu2 0 2>,
+ <&cpu3 0 2>,
+ <&cpu4 0 2>,
+ <&cpu5 0 2>,
+ <&cpu6 0 2>,
+ <&cpu7 0 2>;
};
map1 {
- trip = <&cpu2_alert0>;
- cooling-device = <&cpu4 0 2>;
- };
- map2 {
- trip = <&cpu2_alert1>;
- cooling-device = <&cpu0 3 7>;
- };
- map3 {
trip = <&cpu2_alert1>;
- cooling-device = <&cpu4 3 12>;
+ cooling-device = <&cpu0 3 7>,
+ <&cpu1 3 7>,
+ <&cpu2 3 7>,
+ <&cpu3 3 7>,
+ <&cpu4 3 12>,
+ <&cpu5 3 12>,
+ <&cpu6 3 12>,
+ <&cpu7 3 12>;
};
};
};
@@ -175,19 +193,25 @@
cooling-maps {
map0 {
trip = <&cpu3_alert0>;
- cooling-device = <&cpu0 0 2>;
+ cooling-device = <&cpu0 0 2>,
+ <&cpu1 0 2>,
+ <&cpu2 0 2>,
+ <&cpu3 0 2>,
+ <&cpu4 0 2>,
+ <&cpu5 0 2>,
+ <&cpu6 0 2>,
+ <&cpu7 0 2>;
};
map1 {
- trip = <&cpu3_alert0>;
- cooling-device = <&cpu4 0 2>;
- };
- map2 {
- trip = <&cpu3_alert1>;
- cooling-device = <&cpu0 3 7>;
- };
- map3 {
trip = <&cpu3_alert1>;
- cooling-device = <&cpu4 3 12>;
+ cooling-device = <&cpu0 3 7>,
+ <&cpu1 3 7>,
+ <&cpu2 3 7>,
+ <&cpu3 3 7>,
+ <&cpu4 3 12>,
+ <&cpu5 3 12>,
+ <&cpu6 3 12>,
+ <&cpu7 3 12>;
};
};
};
diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
index e522edb2bb82..f1d55f51c8c3 100644
--- a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
+++ b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
@@ -113,24 +113,30 @@
*/
map3 {
trip = <&cpu0_alert3>;
- cooling-device = <&cpu0 0 2>;
- };
- map4 {
- trip = <&cpu0_alert3>;
- cooling-device = <&cpu4 0 2>;
+ cooling-device = <&cpu0 0 2>,
+ <&cpu1 0 2>,
+ <&cpu2 0 2>,
+ <&cpu3 0 2>,
+ <&cpu4 0 2>,
+ <&cpu5 0 2>,
+ <&cpu6 0 2>,
+ <&cpu7 0 2>;
};
/*
* When reaching cpu0_alert4, reduce CPU
* further, down to 600 MHz (12 steps for big,
* 7 steps for LITTLE).
*/
- map5 {
- trip = <&cpu0_alert4>;
- cooling-device = <&cpu0 3 7>;
- };
- map6 {
+ map4 {
trip = <&cpu0_alert4>;
- cooling-device = <&cpu4 3 12>;
+ cooling-device = <&cpu0 3 7>,
+ <&cpu1 3 7>,
+ <&cpu2 3 7>,
+ <&cpu3 3 7>,
+ <&cpu4 3 12>,
+ <&cpu5 3 12>,
+ <&cpu6 3 12>,
+ <&cpu7 3 12>;
};
};
};
@@ -185,19 +191,25 @@
};
map3 {
trip = <&cpu1_alert3>;
- cooling-device = <&cpu0 0 2>;
+ cooling-device = <&cpu0 0 2>,
+ <&cpu1 0 2>,
+ <&cpu2 0 2>,
+ <&cpu3 0 2>,
+ <&cpu4 0 2>,
+ <&cpu5 0 2>,
+ <&cpu6 0 2>,
+ <&cpu7 0 2>;
};
map4 {
- trip = <&cpu1_alert3>;
- cooling-device = <&cpu4 0 2>;
- };
- map5 {
- trip = <&cpu1_alert4>;
- cooling-device = <&cpu0 3 7>;
- };
- map6 {
trip = <&cpu1_alert4>;
- cooling-device = <&cpu4 3 12>;
+ cooling-device = <&cpu0 3 7>,
+ <&cpu1 3 7>,
+ <&cpu2 3 7>,
+ <&cpu3 3 7>,
+ <&cpu4 3 12>,
+ <&cpu5 3 12>,
+ <&cpu6 3 12>,
+ <&cpu7 3 12>;
};
};
};
@@ -252,19 +264,25 @@
};
map3 {
trip = <&cpu2_alert3>;
- cooling-device = <&cpu0 0 2>;
+ cooling-device = <&cpu0 0 2>,
+ <&cpu1 0 2>,
+ <&cpu2 0 2>,
+ <&cpu3 0 2>,
+ <&cpu4 0 2>,
+ <&cpu5 0 2>,
+ <&cpu6 0 2>,
+ <&cpu7 0 2>;
};
map4 {
- trip = <&cpu2_alert3>;
- cooling-device = <&cpu4 0 2>;
- };
- map5 {
- trip = <&cpu2_alert4>;
- cooling-device = <&cpu0 3 7>;
- };
- map6 {
trip = <&cpu2_alert4>;
- cooling-device = <&cpu4 3 12>;
+ cooling-device = <&cpu0 3 7>,
+ <&cpu1 3 7>,
+ <&cpu2 3 7>,
+ <&cpu3 3 7>,
+ <&cpu4 3 12>,
+ <&cpu5 3 12>,
+ <&cpu6 3 12>,
+ <&cpu7 3 12>;
};
};
};
@@ -319,19 +337,25 @@
};
map3 {
trip = <&cpu3_alert3>;
- cooling-device = <&cpu0 0 2>;
+ cooling-device = <&cpu0 0 2>,
+ <&cpu1 0 2>,
+ <&cpu2 0 2>,
+ <&cpu3 0 2>,
+ <&cpu4 0 2>,
+ <&cpu5 0 2>,
+ <&cpu6 0 2>,
+ <&cpu7 0 2>;
};
map4 {
- trip = <&cpu3_alert3>;
- cooling-device = <&cpu4 0 2>;
- };
- map5 {
- trip = <&cpu3_alert4>;
- cooling-device = <&cpu0 3 7>;
- };
- map6 {
trip = <&cpu3_alert4>;
- cooling-device = <&cpu4 3 12>;
+ cooling-device = <&cpu0 3 7>,
+ <&cpu1 3 7>,
+ <&cpu2 3 7>,
+ <&cpu3 3 7>,
+ <&cpu4 3 12>,
+ <&cpu5 3 12>,
+ <&cpu6 3 12>,
+ <&cpu7 3 12>;
};
};
};
--
2.19.1.568.g152ad8e3369a
next prev parent reply other threads:[~2018-11-16 10:01 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-11-16 10:01 [PATCH 0/6] ARM: dts: Fix incomplete cooling-maps Viresh Kumar
2018-11-16 10:01 ` Viresh Kumar [this message]
2018-11-18 14:14 ` [PATCH 1/6] ARM: dts: exynos: Add all CPUs in cooling maps Krzysztof Kozlowski
2018-11-16 10:01 ` [PATCH 2/6] ARM: dts: ls1021a: " Viresh Kumar
2018-11-28 2:46 ` Shawn Guo
2018-11-16 10:01 ` [PATCH 3/6] ARM: dts: mt7623: " Viresh Kumar
2018-11-16 10:01 ` [PATCH 4/6] ARM: dts: rockchip: " Viresh Kumar
2018-11-26 13:16 ` Heiko Stuebner
2018-11-16 10:01 ` [PATCH 5/6] ARM: dts: sunxi: " Viresh Kumar
2018-11-19 14:39 ` Maxime Ripard
2018-11-16 10:01 ` [PATCH 6/6] ARM: dts: uniphier: " Viresh Kumar
2018-11-26 15:49 ` Masahiro Yamada
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=24d8433f544046eda4d21e8c7133e3bab770b615.1542362000.git.viresh.kumar@linaro.org \
--to=viresh.kumar@linaro.org \
--cc=daniel.lezcano@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=kgene@kernel.org \
--cc=krzk@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=robh+dt@kernel.org \
--cc=vincent.guittot@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).