From: Christophe Leroy <christophe.leroy@c-s.fr>
To: Benjamin Herrenschmidt <benh@kernel.crashing.org>,
Paul Mackerras <paulus@samba.org>,
Michael Ellerman <mpe@ellerman.id.au>,
rjw@rjwysocki.net, viresh.kumar@linaro.org
Cc: linux-kernel@vger.kernel.org, linuxppc-dev@lists.ozlabs.org,
linux-pm@vger.kernel.org
Subject: [PATCH 5/7] powerpc: change CONFIG_PPC_STD_MMU_32 to CONFIG_PPC_BOOK3S_32
Date: Sat, 17 Nov 2018 10:25:02 +0000 (UTC) [thread overview]
Message-ID: <1c200e524bc6533cff26461ad8decb9f848ceacd.1542395798.git.christophe.leroy@c-s.fr> (raw)
In-Reply-To: <aeeaafbdf0357f8bdb8ffd86822a0ddfd5521fd6.1542395798.git.christophe.leroy@c-s.fr>
Today we have:
config PPC_BOOK3S_32
bool "512x/52xx/6xx/7xx/74xx/82xx/83xx/86xx"
[depends on PPC32 within a choice]
config PPC_BOOK3S
def_bool y
depends on PPC_BOOK3S_32 || PPC_BOOK3S_64
config PPC_STD_MMU
def_bool y
depends on PPC_BOOK3S
config PPC_STD_MMU_32
def_bool y
depends on PPC_STD_MMU && PPC32
PPC_STD_MMU_32 is therefore redundant with PPC_BOOK3S_32.
In order to make the code clearer, lets use preferably PPC_BOOK3S_32.
This will allow to remove CONFIG_PPC_STD_MMU_32 in a later patch.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
---
arch/powerpc/include/asm/mmu.h | 2 +-
arch/powerpc/include/asm/tlb.h | 2 +-
arch/powerpc/kernel/setup-common.c | 4 ++--
arch/powerpc/mm/Makefile | 2 +-
arch/powerpc/mm/pgtable_32.c | 2 +-
arch/powerpc/xmon/xmon.c | 4 ++--
6 files changed, 8 insertions(+), 8 deletions(-)
diff --git a/arch/powerpc/include/asm/mmu.h b/arch/powerpc/include/asm/mmu.h
index 47b651deff5b..8a6d3b129c6d 100644
--- a/arch/powerpc/include/asm/mmu.h
+++ b/arch/powerpc/include/asm/mmu.h
@@ -338,7 +338,7 @@ static inline void mmu_early_init_devtree(void) { }
#endif /* __ASSEMBLY__ */
#endif
-#if defined(CONFIG_PPC_STD_MMU_32)
+#if defined(CONFIG_PPC_BOOK3S_32)
/* 32-bit classic hash table MMU */
#include <asm/book3s/32/mmu-hash.h>
#elif defined(CONFIG_40x)
diff --git a/arch/powerpc/include/asm/tlb.h b/arch/powerpc/include/asm/tlb.h
index f0e571b2dc7c..e24c67d5ba75 100644
--- a/arch/powerpc/include/asm/tlb.h
+++ b/arch/powerpc/include/asm/tlb.h
@@ -40,7 +40,7 @@ extern void flush_hash_entry(struct mm_struct *mm, pte_t *ptep,
static inline void __tlb_remove_tlb_entry(struct mmu_gather *tlb, pte_t *ptep,
unsigned long address)
{
-#ifdef CONFIG_PPC_STD_MMU_32
+#ifdef CONFIG_PPC_BOOK3S_32
if (pte_val(*ptep) & _PAGE_HASHPTE)
flush_hash_entry(tlb->mm, ptep, address);
#endif
diff --git a/arch/powerpc/kernel/setup-common.c b/arch/powerpc/kernel/setup-common.c
index 93ee3703b42f..ffa1e00349dd 100644
--- a/arch/powerpc/kernel/setup-common.c
+++ b/arch/powerpc/kernel/setup-common.c
@@ -800,7 +800,7 @@ static __init void print_system_info(void)
#ifdef CONFIG_PPC_BOOK3S_64
pr_info("ppc64_pft_size = 0x%llx\n", ppc64_pft_size);
#endif
-#ifdef CONFIG_PPC_STD_MMU_32
+#ifdef CONFIG_PPC_BOOK3S_32
pr_info("Hash_size = 0x%lx\n", Hash_size);
#endif
pr_info("phys_mem_size = 0x%llx\n",
@@ -830,7 +830,7 @@ static __init void print_system_info(void)
if (htab_hash_mask)
pr_info("htab_hash_mask = 0x%lx\n", htab_hash_mask);
#endif
-#ifdef CONFIG_PPC_STD_MMU_32
+#ifdef CONFIG_PPC_BOOK3S_32
if (Hash)
pr_info("Hash = 0x%p\n", Hash);
if (Hash_mask)
diff --git a/arch/powerpc/mm/Makefile b/arch/powerpc/mm/Makefile
index ca96e7be4d0e..5cc9643d2e0c 100644
--- a/arch/powerpc/mm/Makefile
+++ b/arch/powerpc/mm/Makefile
@@ -17,7 +17,7 @@ hash64-$(CONFIG_PPC_NATIVE) := hash_native_64.o
obj-$(CONFIG_PPC_BOOK3E_64) += pgtable-book3e.o
obj-$(CONFIG_PPC_BOOK3S_64) += pgtable-hash64.o hash_utils_64.o slb.o $(hash64-y) mmu_context_book3s64.o pgtable-book3s64.o
obj-$(CONFIG_PPC_RADIX_MMU) += pgtable-radix.o tlb-radix.o
-obj-$(CONFIG_PPC_STD_MMU_32) += ppc_mmu_32.o hash_low_32.o mmu_context_hash32.o
+obj-$(CONFIG_PPC_BOOK3S_32) += ppc_mmu_32.o hash_low_32.o mmu_context_hash32.o
obj-$(CONFIG_PPC_STD_MMU) += tlb_hash$(BITS).o
ifdef CONFIG_PPC_BOOK3S_64
obj-$(CONFIG_PPC_4K_PAGES) += hash64_4k.o
diff --git a/arch/powerpc/mm/pgtable_32.c b/arch/powerpc/mm/pgtable_32.c
index bda3c6f1bd32..10c4369cd02d 100644
--- a/arch/powerpc/mm/pgtable_32.c
+++ b/arch/powerpc/mm/pgtable_32.c
@@ -260,7 +260,7 @@ static void __init __mapin_ram_chunk(unsigned long offset, unsigned long top)
ktext = ((char *)v >= _stext && (char *)v < etext) ||
((char *)v >= _sinittext && (char *)v < _einittext);
map_kernel_page(v, p, ktext ? PAGE_KERNEL_TEXT : PAGE_KERNEL);
-#ifdef CONFIG_PPC_STD_MMU_32
+#ifdef CONFIG_PPC_BOOK3S_32
if (ktext)
hash_preload(&init_mm, v, false, 0x300);
#endif
diff --git a/arch/powerpc/xmon/xmon.c b/arch/powerpc/xmon/xmon.c
index 36b8dc47a3c3..79fa45df1eee 100644
--- a/arch/powerpc/xmon/xmon.c
+++ b/arch/powerpc/xmon/xmon.c
@@ -273,7 +273,7 @@ Commands:\n\
X exit monitor and don't recover\n"
#if defined(CONFIG_PPC64) && !defined(CONFIG_PPC_BOOK3E)
" u dump segment table or SLB\n"
-#elif defined(CONFIG_PPC_STD_MMU_32)
+#elif defined(CONFIG_PPC_BOOK3S_32)
" u dump segment registers\n"
#elif defined(CONFIG_44x) || defined(CONFIG_PPC_BOOK3E)
" u dump TLB\n"
@@ -3495,7 +3495,7 @@ void dump_segments(void)
}
#endif
-#ifdef CONFIG_PPC_STD_MMU_32
+#ifdef CONFIG_PPC_BOOK3S_32
void dump_segments(void)
{
int i;
--
2.13.3
next prev parent reply other threads:[~2018-11-17 10:25 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-11-17 10:24 [PATCH 1/7] drivers/cpufreq: change CONFIG_6xx to CONFIG_PPC_BOOK3S_32 Christophe Leroy
2018-11-17 10:24 ` [PATCH 2/7] powerpc: " Christophe Leroy
2018-12-03 21:15 ` Mathieu Malaterre
2018-12-04 3:55 ` Michael Ellerman
2018-11-17 10:24 ` [PATCH 3/7] powerpc/kconfig: remove CONFIG_6xx Christophe Leroy
2018-11-17 10:25 ` [PATCH 4/7] powerpc/32: Remove #ifdef CONFIG_PPC_STD_MMU_32 in asm/book3s/32/pgtable.h Christophe Leroy
2018-11-17 10:25 ` Christophe Leroy [this message]
2018-11-17 10:25 ` [PATCH 6/7] powerpc: change CONFIG_PPC_STD_MMU to CONFIG_PPC_BOOK3S Christophe Leroy
2018-11-17 10:25 ` [PATCH 7/7] powerpc/kconfig: remove PPC_STD_MMU_32 and PPC_STD_MMU Christophe Leroy
2018-11-19 4:04 ` [PATCH 1/7] drivers/cpufreq: change CONFIG_6xx to CONFIG_PPC_BOOK3S_32 Viresh Kumar
2018-12-07 13:07 ` [1/7] " Michael Ellerman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1c200e524bc6533cff26461ad8decb9f848ceacd.1542395798.git.christophe.leroy@c-s.fr \
--to=christophe.leroy@c-s.fr \
--cc=benh@kernel.crashing.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=mpe@ellerman.id.au \
--cc=paulus@samba.org \
--cc=rjw@rjwysocki.net \
--cc=viresh.kumar@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).