From: Todor Tomov <todor.tomov@linaro.org>
To: andy.gross@linaro.org, david.brown@linaro.org,
robh+dt@kernel.org, mark.rutland@arm.com,
linux-arm-msm@vger.kernel.org, linux-soc@vger.kernel.org,
devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org, vivek.gautam@codeaurora.org,
Todor Tomov <todor.tomov@linaro.org>
Subject: [PATCH 1/2] arm64: dts: qcom: msm8996: Add VFE SMMU node
Date: Mon, 19 Nov 2018 11:25:36 +0200 [thread overview]
Message-ID: <1542619537-24038-1-git-send-email-todor.tomov@linaro.org> (raw)
Add VFE SMMU node.
Signed-off-by: Todor Tomov <todor.tomov@linaro.org>
---
This patch depends on patchset:
https://lore.kernel.org/patchwork/cover/1013166/
arch/arm64/boot/dts/qcom/msm8996.dtsi | 17 +++++++++++++++++
1 file changed, 17 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index 13bb964..a4d087e5 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -950,6 +950,23 @@
};
};
+ vfe_smmu: arm,smmu@da0000 {
+ compatible = "qcom,msm8996-smmu-v2", "qcom,smmu-v2";
+ reg = <0xda0000 0x10000>;
+
+ #global-interrupts = <1>;
+ interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&mmcc MMAGIC_CAMSS_GDSC>;
+ clocks = <&mmcc SMMU_VFE_AHB_CLK>,
+ <&mmcc SMMU_VFE_AXI_CLK>;
+ clock-names = "iface",
+ "bus";
+ #iommu-cells = <1>;
+ status = "ok";
+ };
+
agnoc@0 {
power-domains = <&gcc AGGRE0_NOC_GDSC>;
compatible = "simple-pm-bus";
--
2.7.4
next reply other threads:[~2018-11-19 9:25 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-11-19 9:25 Todor Tomov [this message]
2018-11-19 9:25 ` [PATCH 2/2] arm64: dts: qcom: msm8996: Add CAMSS support Todor Tomov
2018-11-19 11:08 ` [PATCH 1/2] arm64: dts: qcom: msm8996: Add VFE SMMU node Vivek Gautam
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1542619537-24038-1-git-send-email-todor.tomov@linaro.org \
--to=todor.tomov@linaro.org \
--cc=andy.gross@linaro.org \
--cc=david.brown@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-soc@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=robh+dt@kernel.org \
--cc=vivek.gautam@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).