linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: "Z.q. Hou" <zhiqiang.hou@nxp.com>
To: "linux-pci@vger.kernel.org" <linux-pci@vger.kernel.org>,
	"linux-arm-kernel@lists.infradead.org" 
	<linux-arm-kernel@lists.infradead.org>,
	"devicetree@vger.kernel.org" <devicetree@vger.kernel.org>,
	"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
	"bhelgaas@google.com" <bhelgaas@google.com>,
	"robh+dt@kernel.org" <robh+dt@kernel.org>,
	"mark.rutland@arm.com" <mark.rutland@arm.com>,
	"l.subrahmanya@mobiveil.co.in" <l.subrahmanya@mobiveil.co.in>,
	"shawnguo@kernel.org" <shawnguo@kernel.org>,
	Leo Li <leoyang.li@nxp.com>,
	"lorenzo.pieralisi@arm.com" <lorenzo.pieralisi@arm.com>,
	"catalin.marinas@arm.com" <catalin.marinas@arm.com>,
	"will.deacon@arm.com" <will.deacon@arm.com>
Cc: Mingkai Hu <mingkai.hu@nxp.com>,
	"M.h. Lian" <minghuan.lian@nxp.com>,
	Xiaowei Bao <xiaowei.bao@nxp.com>,
	"Z.q. Hou" <zhiqiang.hou@nxp.com>
Subject: [PATCHv2 09/25] PCI: mobiveil: correct inbound/outbound window setup routines
Date: Tue, 20 Nov 2018 09:26:31 +0000	[thread overview]
Message-ID: <20181120092615.11680-10-Zhiqiang.Hou@nxp.com> (raw)
In-Reply-To: <20181120092615.11680-1-Zhiqiang.Hou@nxp.com>

From: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>

Outbound window routine:
 - Removed unused var definition and register read operations.
 - Added the upper 32-bit cpu address setup of the window.
 - Instead of blindly write, only change the fields specified.
 - Masked the lower bits of window size in case override the
   control bits.
 - Check if the passing window number is available, instead of
   the total number of the initialized windows.

Inbound window routine:
 - Added parameter 'u64 cpu_addr' to specify the cpu address
   of the window instead of using 'pci_addr'.
 - Changed 'int pci_addr' to 'u64 pci_addr', and added setup
   of the upper 32-bit pci address of the window.
 - Moved the PCIe PIO master enablement to mobiveil_host_init().
 - Instead of blindly write, only change the fields specified.
 - Masked the lower bits of window size in case override the
   control bits.
 - Check if the passing window number is available, instead of
   the total number of the initialized windows.
 - And added the statistic of initialized inbound windows.

Fixes: 9af6bcb11e12 ("PCI: mobiveil: Add Mobiveil PCIe Host
Bridge IP driver")
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
---
V2:
 - Inbound window setup rountine: clear the size field before set it.

 drivers/pci/controller/pcie-mobiveil.c | 70 +++++++++++++++-----------
 1 file changed, 42 insertions(+), 28 deletions(-)

diff --git a/drivers/pci/controller/pcie-mobiveil.c b/drivers/pci/controller/pcie-mobiveil.c
index e88afc792a5c..4ba458474e42 100644
--- a/drivers/pci/controller/pcie-mobiveil.c
+++ b/drivers/pci/controller/pcie-mobiveil.c
@@ -65,9 +65,13 @@
 #define PAB_AXI_AMAP_CTRL(win)		PAB_REG_ADDR(0x0ba0, win)
 #define  WIN_ENABLE_SHIFT		0
 #define  WIN_TYPE_SHIFT			1
+#define  WIN_TYPE_MASK			0x3
+#define  WIN_SIZE_SHIFT			10
+#define  WIN_SIZE_MASK			0x3fffff
 
 #define PAB_EXT_AXI_AMAP_SIZE(win)	PAB_EXT_REG_ADDR(0xbaf0, win)
 
+#define PAB_EXT_AXI_AMAP_AXI_WIN(win)	PAB_EXT_REG_ADDR(0x80a0, win)
 #define PAB_AXI_AMAP_AXI_WIN(win)	PAB_REG_ADDR(0x0ba4, win)
 #define  AXI_WINDOW_ALIGN_MASK		3
 
@@ -82,8 +86,10 @@
 #define PAB_PEX_AMAP_CTRL(win)		PAB_REG_ADDR(0x4ba0, win)
 #define  AMAP_CTRL_EN_SHIFT		0
 #define  AMAP_CTRL_TYPE_SHIFT		1
+#define  AMAP_CTRL_TYPE_MASK		3
 
 #define PAB_EXT_PEX_AMAP_SIZEN(win)	PAB_EXT_REG_ADDR(0xbef0, win)
+#define PAB_EXT_PEX_AMAP_AXI_WIN(win)	PAB_EXT_REG_ADDR(0xb4a0, win)
 #define PAB_PEX_AMAP_AXI_WIN(win)	PAB_REG_ADDR(0x4ba4, win)
 #define PAB_PEX_AMAP_PEX_WIN_L(win)	PAB_REG_ADDR(0x4ba8, win)
 #define PAB_PEX_AMAP_PEX_WIN_H(win)	PAB_REG_ADDR(0x4bac, win)
@@ -455,49 +461,51 @@ static int mobiveil_pcie_parse_dt(struct mobiveil_pcie *pcie)
 }
 
 static void program_ib_windows(struct mobiveil_pcie *pcie, int win_num,
-			       int pci_addr, u32 type, u64 size)
+			       u64 cpu_addr, u64 pci_addr, u32 type, u64 size)
 {
-	int pio_ctrl_val;
-	int amap_ctrl_dw;
+	u32 value;
 	u64 size64 = ~(size - 1);
 
-	if ((pcie->ib_wins_configured + 1) > pcie->ppio_wins) {
+	if (win_num >= pcie->ppio_wins) {
 		dev_err(&pcie->pdev->dev,
 			"ERROR: max inbound windows reached !\n");
 		return;
 	}
 
-	pio_ctrl_val = csr_readl(pcie, PAB_PEX_PIO_CTRL);
-	pio_ctrl_val |= 1 << PIO_ENABLE_SHIFT;
-	csr_writel(pcie, pio_ctrl_val, PAB_PEX_PIO_CTRL);
-
-	amap_ctrl_dw = csr_readl(pcie, PAB_PEX_AMAP_CTRL(win_num));
-	amap_ctrl_dw |= (type << AMAP_CTRL_TYPE_SHIFT) |
-			(1 << AMAP_CTRL_EN_SHIFT) |
-			lower_32_bits(size64);
-	csr_writel(pcie, amap_ctrl_dw, PAB_PEX_AMAP_CTRL(win_num));
+	value = csr_readl(pcie, PAB_PEX_AMAP_CTRL(win_num));
+	value &= ~(AMAP_CTRL_TYPE_MASK << AMAP_CTRL_TYPE_SHIFT |
+		 WIN_SIZE_MASK << WIN_SIZE_SHIFT);
+	value |= (type << AMAP_CTRL_TYPE_SHIFT) | (1 << AMAP_CTRL_EN_SHIFT) |
+		 (lower_32_bits(size64) & WIN_SIZE_MASK << WIN_SIZE_SHIFT);
+	csr_writel(pcie, value, PAB_PEX_AMAP_CTRL(win_num));
 
 	csr_writel(pcie, upper_32_bits(size64),
 		   PAB_EXT_PEX_AMAP_SIZEN(win_num));
 
-	csr_writel(pcie, pci_addr, PAB_PEX_AMAP_AXI_WIN(win_num));
+	csr_writel(pcie, lower_32_bits(cpu_addr),
+		   PAB_PEX_AMAP_AXI_WIN(win_num));
+	csr_writel(pcie, upper_32_bits(cpu_addr),
+		   PAB_EXT_PEX_AMAP_AXI_WIN(win_num));
+
+	csr_writel(pcie, lower_32_bits(pci_addr),
+		   PAB_PEX_AMAP_PEX_WIN_L(win_num));
+	csr_writel(pcie, upper_32_bits(pci_addr),
+		   PAB_PEX_AMAP_PEX_WIN_H(win_num));
 
-	csr_writel(pcie, pci_addr, PAB_PEX_AMAP_PEX_WIN_L(win_num));
-	csr_writel(pcie, 0, PAB_PEX_AMAP_PEX_WIN_H(win_num));
+	pcie->ib_wins_configured++;
 }
 
 /*
  * routine to program the outbound windows
  */
 static void program_ob_windows(struct mobiveil_pcie *pcie, int win_num,
-			       u64 cpu_addr, u64 pci_addr,
-			       u32 config_io_bit, u64 size)
+			       u64 cpu_addr, u64 pci_addr, u32 type, u64 size)
 {
 
-	u32 value, type;
+	u32 value;
 	u64 size64 = ~(size - 1);
 
-	if ((pcie->ob_wins_configured + 1) > pcie->apio_wins) {
+	if (win_num >= pcie->apio_wins) {
 		dev_err(&pcie->pdev->dev,
 			"ERROR: max outbound windows reached !\n");
 		return;
@@ -507,10 +515,12 @@ static void program_ob_windows(struct mobiveil_pcie *pcie, int win_num,
 	 * program Enable Bit to 1, Type Bit to (00) base 2, AXI Window Size Bit
 	 * to 4 KB in PAB_AXI_AMAP_CTRL register
 	 */
-	type = config_io_bit;
 	value = csr_readl(pcie, PAB_AXI_AMAP_CTRL(win_num));
-	csr_writel(pcie, 1 << WIN_ENABLE_SHIFT | type << WIN_TYPE_SHIFT |
-		   lower_32_bits(size64), PAB_AXI_AMAP_CTRL(win_num));
+	value &= ~(WIN_TYPE_MASK << WIN_TYPE_SHIFT |
+		 WIN_SIZE_MASK << WIN_SIZE_SHIFT);
+	value |= 1 << WIN_ENABLE_SHIFT | type << WIN_TYPE_SHIFT |
+		 (lower_32_bits(size64) & WIN_SIZE_MASK << WIN_SIZE_SHIFT);
+	csr_writel(pcie, value, PAB_AXI_AMAP_CTRL(win_num));
 
 	csr_writel(pcie, upper_32_bits(size64), PAB_EXT_AXI_AMAP_SIZE(win_num));
 
@@ -518,11 +528,10 @@ static void program_ob_windows(struct mobiveil_pcie *pcie, int win_num,
 	 * program AXI window base with appropriate value in
 	 * PAB_AXI_AMAP_AXI_WIN0 register
 	 */
-	value = csr_readl(pcie, PAB_AXI_AMAP_AXI_WIN(win_num));
-	csr_writel(pcie, cpu_addr & (~AXI_WINDOW_ALIGN_MASK),
+	csr_writel(pcie, lower_32_bits(cpu_addr) & (~AXI_WINDOW_ALIGN_MASK),
 		   PAB_AXI_AMAP_AXI_WIN(win_num));
-
-	value = csr_readl(pcie, PAB_AXI_AMAP_PEX_WIN_H(win_num));
+	csr_writel(pcie, upper_32_bits(cpu_addr),
+		   PAB_EXT_AXI_AMAP_AXI_WIN(win_num));
 
 	csr_writel(pcie, lower_32_bits(pci_addr),
 		   PAB_AXI_AMAP_PEX_WIN_L(win_num));
@@ -604,6 +613,11 @@ static int mobiveil_host_init(struct mobiveil_pcie *pcie)
 	value |= APIO_EN_MASK;
 	csr_writel(pcie, value, PAB_AXI_PIO_CTRL);
 
+	/* Enable PCIe PIO master */
+	value = csr_readl(pcie, PAB_PEX_PIO_CTRL);
+	value |= 1 << PIO_ENABLE_SHIFT;
+	csr_writel(pcie, value, PAB_PEX_PIO_CTRL);
+
 	/*
 	 * we'll program one outbound window for config reads and
 	 * another default inbound window for all the upstream traffic
@@ -616,7 +630,7 @@ static int mobiveil_host_init(struct mobiveil_pcie *pcie)
 			   CFG_WINDOW_TYPE, resource_size(pcie->ob_io_res));
 
 	/* memory inbound translation window */
-	program_ib_windows(pcie, WIN_NUM_0, 0, MEM_WINDOW_TYPE, IB_WIN_SIZE);
+	program_ib_windows(pcie, WIN_NUM_0, 0, 0, MEM_WINDOW_TYPE, IB_WIN_SIZE);
 
 	/* Get the I/O and memory ranges from DT */
 	resource_list_for_each_entry(win, &pcie->resources) {
-- 
2.17.1


  parent reply	other threads:[~2018-11-20  9:26 UTC|newest]

Thread overview: 56+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-11-20  9:25 [PATCHv2 00/25] PCI: refactor Mobiveil driver and add PCIe Gen4 driver for NXP Layerscape SoCs Z.q. Hou
2018-11-20  9:25 ` [PATCHv2 01/25] PCI: mobiveil: uniform the register accessors Z.q. Hou
2018-11-20 10:17   ` M.h. Lian
2018-11-20  9:25 ` [PATCHv2 02/25] PCI: mobiveil: format the code without function change Z.q. Hou
2018-11-20 10:17   ` M.h. Lian
2018-11-20  9:25 ` [PATCHv2 03/25] PCI: mobiveil: correct the returned error number Z.q. Hou
2018-11-20 10:31   ` M.h. Lian
2018-11-20  9:26 ` [PATCHv2 04/25] PCI: mobiveil: remove flag MSI_FLAG_MULTI_PCI_MSI Z.q. Hou
2018-11-20 10:33   ` M.h. Lian
2018-11-20  9:26 ` [PATCHv2 05/25] PCI: mobiveil: correct PCI base address in MEM/IO outbound windows Z.q. Hou
2018-11-20 10:34   ` M.h. Lian
2018-11-20  9:26 ` [PATCHv2 06/25] PCI: mobiveil: replace the resource list iteration function Z.q. Hou
2018-11-20 10:35   ` M.h. Lian
2018-11-20  9:26 ` [PATCHv2 07/25] PCI: mobiveil: use WIN_NUM_0 explicitly for CFG outbound window Z.q. Hou
2018-11-20 10:35   ` M.h. Lian
2018-11-20  9:26 ` [PATCHv2 08/25] PCI: mobiveil: use the 1st inbound window for MEM inbound transactions Z.q. Hou
2018-11-20 10:59   ` M.h. Lian
2018-11-20  9:26 ` Z.q. Hou [this message]
2018-11-20 11:00   ` [PATCHv2 09/25] PCI: mobiveil: correct inbound/outbound window setup routines M.h. Lian
2018-11-20 11:00   ` M.h. Lian
2018-11-20  9:26 ` [PATCHv2 10/25] PCI: mobiveil: fix the INTx process error Z.q. Hou
2018-11-20 11:00   ` M.h. Lian
2018-11-20  9:26 ` [PATCHv2 11/25] PCI: mobiveil: only fix up the Class Code field Z.q. Hou
2018-11-20 11:01   ` M.h. Lian
2018-11-20  9:26 ` [PATCHv2 12/25] PCI: mobiveil: move out the link up waiting from mobiveil_host_init Z.q. Hou
2018-11-20 11:01   ` M.h. Lian
2018-11-20  9:26 ` [PATCHv2 13/25] PCI: mobiveil: move irq chained handler setup out of DT parse Z.q. Hou
2018-11-20 11:12   ` M.h. Lian
2018-11-20  9:27 ` [PATCHv2 14/25] PCI: mobiveil: initialize Primary/Secondary/Subordinate bus number Z.q. Hou
2018-11-20 11:13   ` M.h. Lian
2018-11-20 11:24   ` M.h. Lian
2018-11-20  9:27 ` [PATCHv2 15/25] dt-bindings: pci: mobiveil: change gpio_slave and apb_csr to optional Z.q. Hou
2018-11-20 11:25   ` M.h. Lian
2018-11-20  9:27 ` [PATCHv2 16/25] PCI: mobiveil: refactor Mobiveil PCIe Host Bridge IP driver Z.q. Hou
2018-11-20 11:25   ` M.h. Lian
2018-11-20  9:27 ` [PATCHv2 17/25] PCI: mobiveil: fix the checking of valid device Z.q. Hou
2018-11-20 11:26   ` M.h. Lian
2018-11-20  9:27 ` [PATCHv2 18/25] PCI: mobiveil: continue to initialize the host upon no PCIe link Z.q. Hou
2018-11-20 11:26   ` M.h. Lian
2018-11-20  9:27 ` [PATCHv2 19/25] PCI: mobiveil: disabled IB and OB windows set by bootloader Z.q. Hou
2018-11-20 11:26   ` M.h. Lian
2018-11-20  9:27 ` [PATCHv2 20/25] PCI: mobiveil: add Byte and Half-Word width register accessors Z.q. Hou
2018-11-20 11:27   ` M.h. Lian
2018-11-20  9:27 ` [PATCHv2 21/25] PCI: mobiveil: make mobiveil_host_init can be used to re-init host Z.q. Hou
2018-11-20 11:30   ` M.h. Lian
2018-11-20  9:27 ` [PATCHv2 22/25] dt-bindings: pci: Add NXP Layerscape SoCs PCIe Gen4 controller Z.q. Hou
2018-11-20 11:31   ` M.h. Lian
2018-12-05 22:38   ` Rob Herring
2018-12-05 22:40     ` Rob Herring
2018-12-11  9:50     ` Z.q. Hou
2018-11-20  9:27 ` [PATCHv2 23/25] PCI: mobiveil: add PCIe Gen4 RC driver for NXP Layerscape SoCs Z.q. Hou
2018-11-20 11:32   ` M.h. Lian
2018-11-20  9:28 ` [PATCHv2 24/25] arm64: dts: freescale: lx2160a: add pcie DT nodes Z.q. Hou
2018-11-20 11:32   ` M.h. Lian
2018-11-20  9:28 ` [PATCHv2 25/25] arm64: defconfig: Enable CONFIG_PCI_LAYERSCAPE_GEN4 Z.q. Hou
2018-11-20 11:33   ` M.h. Lian

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20181120092615.11680-10-Zhiqiang.Hou@nxp.com \
    --to=zhiqiang.hou@nxp.com \
    --cc=bhelgaas@google.com \
    --cc=catalin.marinas@arm.com \
    --cc=devicetree@vger.kernel.org \
    --cc=l.subrahmanya@mobiveil.co.in \
    --cc=leoyang.li@nxp.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=lorenzo.pieralisi@arm.com \
    --cc=mark.rutland@arm.com \
    --cc=minghuan.lian@nxp.com \
    --cc=mingkai.hu@nxp.com \
    --cc=robh+dt@kernel.org \
    --cc=shawnguo@kernel.org \
    --cc=will.deacon@arm.com \
    --cc=xiaowei.bao@nxp.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).