linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Michal Hocko <mhocko@kernel.org>
To: linux-api@vger.kernel.org
Cc: Andrew Morton <akpm@linux-foundation.org>,
	Alexey Dobriyan <adobriyan@gmail.com>, <linux-mm@kvack.org>,
	LKML <linux-kernel@vger.kernel.org>,
	Michal Hocko <mhocko@suse.com>, Jan Kara <jack@suse.cz>,
	Dan Williams <dan.j.williams@intel.com>,
	David Rientjes <rientjes@google.com>
Subject: [RFC PATCH 1/3] mm, proc: be more verbose about unstable VMA flags in /proc/<pid>/smaps
Date: Tue, 20 Nov 2018 11:35:13 +0100	[thread overview]
Message-ID: <20181120103515.25280-2-mhocko@kernel.org> (raw)
In-Reply-To: <20181120103515.25280-1-mhocko@kernel.org>

From: Michal Hocko <mhocko@suse.com>

Even though vma flags exported via /proc/<pid>/smaps are explicitly
documented to be not guaranteed for future compatibility the warning
doesn't go far enough because it doesn't mention semantic changes to
those flags. And they are important as well because these flags are
a deep implementation internal to the MM code and the semantic might
change at any time.

Let's consider two recent examples:
http://lkml.kernel.org/r/20181002100531.GC4135@quack2.suse.cz
: commit e1fb4a086495 "dax: remove VM_MIXEDMAP for fsdax and device dax" has
: removed VM_MIXEDMAP flag from DAX VMAs. Now our testing shows that in the
: mean time certain customer of ours started poking into /proc/<pid>/smaps
: and looks at VMA flags there and if VM_MIXEDMAP is missing among the VMA
: flags, the application just fails to start complaining that DAX support is
: missing in the kernel.

http://lkml.kernel.org/r/alpine.DEB.2.21.1809241054050.224429@chino.kir.corp.google.com
: Commit 1860033237d4 ("mm: make PR_SET_THP_DISABLE immediately active")
: introduced a regression in that userspace cannot always determine the set
: of vmas where thp is ineligible.
: Userspace relies on the "nh" flag being emitted as part of /proc/pid/smaps
: to determine if a vma is eligible to be backed by hugepages.
: Previous to this commit, prctl(PR_SET_THP_DISABLE, 1) would cause thp to
: be disabled and emit "nh" as a flag for the corresponding vmas as part of
: /proc/pid/smaps.  After the commit, thp is disabled by means of an mm
: flag and "nh" is not emitted.
: This causes smaps parsing libraries to assume a vma is eligible for thp
: and ends up puzzling the user on why its memory is not backed by thp.

In both cases userspace was relying on a semantic of a specific VMA
flag. The primary reason why that happened is a lack of a proper
internface. While this has been worked on and it will be fixed properly,
it seems that our wording could see some refinement and be more vocal
about semantic aspect of these flags as well.

Cc: Jan Kara <jack@suse.cz>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Michal Hocko <mhocko@suse.com>
---
 Documentation/filesystems/proc.txt | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/Documentation/filesystems/proc.txt b/Documentation/filesystems/proc.txt
index 12a5e6e693b6..b1fda309f067 100644
--- a/Documentation/filesystems/proc.txt
+++ b/Documentation/filesystems/proc.txt
@@ -496,7 +496,9 @@ flags associated with the particular virtual memory area in two letter encoded
 
 Note that there is no guarantee that every flag and associated mnemonic will
 be present in all further kernel releases. Things get changed, the flags may
-be vanished or the reverse -- new added.
+be vanished or the reverse -- new added. Interpretatation of their meaning
+might change in future as well. So each consumnent of these flags have to
+follow each specific kernel version for the exact semantic.
 
 This file is only present if the CONFIG_MMU kernel configuration option is
 enabled.
-- 
2.19.1


  reply	other threads:[~2018-11-20 10:35 UTC|newest]

Thread overview: 27+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-11-20 10:35 [RFC PATCH 0/3] THP eligibility reporting via proc Michal Hocko
2018-11-20 10:35 ` Michal Hocko [this message]
2018-11-20 10:51   ` [RFC PATCH 1/3] mm, proc: be more verbose about unstable VMA flags in /proc/<pid>/smaps Jan Kara
2018-11-20 11:41     ` Michal Hocko
2018-11-21  0:01     ` David Rientjes
2018-11-21  6:56       ` Michal Hocko
2018-11-20 18:32   ` Dan Williams
2018-11-21  7:05     ` Michal Hocko
2018-11-21 18:01       ` Mike Rapoport
2018-11-21 17:54   ` Mike Rapoport
2018-11-21 17:58     ` Michal Hocko
2018-11-23 13:47   ` Vlastimil Babka
2018-11-20 10:35 ` [RFC PATCH 2/3] mm, thp, proc: report THP eligibility for each vma Michal Hocko
2018-11-20 11:42   ` Michal Hocko
2018-11-23 15:07   ` Vlastimil Babka
2018-11-23 15:21     ` Michal Hocko
2018-11-23 15:24       ` Vlastimil Babka
2018-11-20 10:35 ` [RFC PATCH 3/3] mm, proc: report PR_SET_THP_DISABLE in proc Michal Hocko
2018-11-20 11:42   ` Michal Hocko
2018-11-23 15:49   ` Vlastimil Babka
2018-11-27  0:33   ` William Kucharski
2018-11-27 13:17     ` Michal Hocko
2018-11-27 14:50       ` William Kucharski
2018-11-27 16:25         ` Michal Hocko
2018-11-27 16:50         ` Vlastimil Babka
2018-11-27 17:06           ` William Kucharski
2018-12-07 10:55 ` [RFC PATCH 0/3] THP eligibility reporting via proc Michal Hocko

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20181120103515.25280-2-mhocko@kernel.org \
    --to=mhocko@kernel.org \
    --cc=adobriyan@gmail.com \
    --cc=akpm@linux-foundation.org \
    --cc=dan.j.williams@intel.com \
    --cc=jack@suse.cz \
    --cc=linux-api@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=mhocko@suse.com \
    --cc=rientjes@google.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).