From: Dmitry Baryshkov <dbaryshkov@gmail.com>
To: cbouatmailru@gmail.com, linux-kernel@vger.kernel.org,
cbou@mail.ru, dwmw2@infradead.org
Subject: [PATCH 3/3]
Date: Sun, 6 Jan 2008 15:30:16 +0300 [thread overview]
Message-ID: <20080106123016.GA13324@doriath.ww600.siemens.net> (raw)
Support using VOLTAGE_* properties for apm calculations. It's pretty
dummy, but useful for batteries for which we can only get voltages.
diff --git a/drivers/power/apm_power.c b/drivers/power/apm_power.c
index bbf3ee1..526c96e 100644
--- a/drivers/power/apm_power.c
+++ b/drivers/power/apm_power.c
@@ -13,6 +13,12 @@
#include <linux/power_supply.h>
#include <linux/apm-emulation.h>
+typedef enum {
+ SOURCE_ENERGY,
+ SOURCE_CHARGE,
+ SOURCE_VOLTAGE,
+} apm_source;
+
#define PSY_PROP(psy, prop, val) psy->get_property(psy, \
POWER_SUPPLY_PROP_##prop, val)
@@ -87,7 +93,7 @@ static void find_main_battery(void)
}
}
-static int calculate_time(int status, int using_charge)
+static int calculate_time(int status, apm_source source)
{
union power_supply_propval full;
union power_supply_propval empty;
@@ -106,20 +112,34 @@ static int calculate_time(int status, int using_charge)
return -1;
}
- if (using_charge) {
+ switch (source) {
+ case SOURCE_CHARGE:
full_prop = POWER_SUPPLY_PROP_CHARGE_FULL;
full_design_prop = POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN;
empty_prop = POWER_SUPPLY_PROP_CHARGE_EMPTY;
empty_design_prop = POWER_SUPPLY_PROP_CHARGE_EMPTY;
cur_avg_prop = POWER_SUPPLY_PROP_CHARGE_AVG;
cur_now_prop = POWER_SUPPLY_PROP_CHARGE_NOW;
- } else {
+ break;
+ case SOURCE_ENERGY:
full_prop = POWER_SUPPLY_PROP_ENERGY_FULL;
full_design_prop = POWER_SUPPLY_PROP_ENERGY_FULL_DESIGN;
empty_prop = POWER_SUPPLY_PROP_ENERGY_EMPTY;
empty_design_prop = POWER_SUPPLY_PROP_CHARGE_EMPTY;
cur_avg_prop = POWER_SUPPLY_PROP_ENERGY_AVG;
cur_now_prop = POWER_SUPPLY_PROP_ENERGY_NOW;
+ break;
+ case SOURCE_VOLTAGE:
+ full_prop = POWER_SUPPLY_PROP_VOLTAGE_MAX;
+ full_design_prop = POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN;
+ empty_prop = POWER_SUPPLY_PROP_VOLTAGE_MIN;
+ empty_design_prop = POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN;
+ cur_avg_prop = POWER_SUPPLY_PROP_VOLTAGE_AVG;
+ cur_now_prop = POWER_SUPPLY_PROP_VOLTAGE_NOW;
+ break;
+ default:
+ printk(KERN_ERR "Unsupported source: %d\n", source);
+ return -1;
}
if (_MPSY_PROP(full_prop, &full)) {
@@ -146,7 +166,7 @@ static int calculate_time(int status, int using_charge)
return -((cur.intval - empty.intval) * 60L) / I.intval;
}
-static int calculate_capacity(int using_charge)
+static int calculate_capacity(apm_source source)
{
enum power_supply_property full_prop, empty_prop;
enum power_supply_property full_design_prop, empty_design_prop;
@@ -154,20 +174,33 @@ static int calculate_capacity(int using_charge)
union power_supply_propval empty, full, cur;
int ret;
- if (using_charge) {
+ switch (source) {
+ case SOURCE_CHARGE:
full_prop = POWER_SUPPLY_PROP_CHARGE_FULL;
empty_prop = POWER_SUPPLY_PROP_CHARGE_EMPTY;
full_design_prop = POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN;
empty_design_prop = POWER_SUPPLY_PROP_CHARGE_EMPTY_DESIGN;
now_prop = POWER_SUPPLY_PROP_CHARGE_NOW;
avg_prop = POWER_SUPPLY_PROP_CHARGE_AVG;
- } else {
+ break;
+ case SOURCE_ENERGY:
full_prop = POWER_SUPPLY_PROP_ENERGY_FULL;
empty_prop = POWER_SUPPLY_PROP_ENERGY_EMPTY;
full_design_prop = POWER_SUPPLY_PROP_ENERGY_FULL_DESIGN;
empty_design_prop = POWER_SUPPLY_PROP_ENERGY_EMPTY_DESIGN;
now_prop = POWER_SUPPLY_PROP_ENERGY_NOW;
avg_prop = POWER_SUPPLY_PROP_ENERGY_AVG;
+ case SOURCE_VOLTAGE:
+ full_prop = POWER_SUPPLY_PROP_VOLTAGE_MAX;
+ empty_prop = POWER_SUPPLY_PROP_VOLTAGE_MIN;
+ full_design_prop = POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN;
+ empty_design_prop = POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN;
+ now_prop = POWER_SUPPLY_PROP_VOLTAGE_NOW;
+ avg_prop = POWER_SUPPLY_PROP_VOLTAGE_AVG;
+ break;
+ default:
+ printk(KERN_ERR "Unsupported source: %d\n", source);
+ return -1;
}
if (_MPSY_PROP(full_prop, &full)) {
@@ -234,10 +267,12 @@ static void apm_battery_apm_get_power_status(struct apm_power_info *info)
info->battery_life = capacity.intval;
} else {
/* try calculate using energy */
- info->battery_life = calculate_capacity(0);
+ info->battery_life = calculate_capacity(SOURCE_ENERGY);
/* if failed try calculate using charge instead */
if (info->battery_life == -1)
- info->battery_life = calculate_capacity(1);
+ info->battery_life = calculate_capacity(SOURCE_CHARGE);
+ if (info->battery_life == -1)
+ info->battery_life = calculate_capacity(SOURCE_VOLTAGE);
}
/* charging status */
@@ -263,18 +298,22 @@ static void apm_battery_apm_get_power_status(struct apm_power_info *info)
!MPSY_PROP(TIME_TO_FULL_NOW, &time_to_full)) {
info->time = time_to_full.intval / 60;
} else {
- info->time = calculate_time(status.intval, 0);
+ info->time = calculate_time(status.intval, SOURCE_ENERGY);
if (info->time == -1)
- info->time = calculate_time(status.intval, 1);
+ info->time = calculate_time(status.intval, SOURCE_CHARGE);
+ if (info->time == -1)
+ info->time = calculate_time(status.intval, SOURCE_VOLTAGE);
}
} else {
if (!MPSY_PROP(TIME_TO_EMPTY_AVG, &time_to_empty) ||
!MPSY_PROP(TIME_TO_EMPTY_NOW, &time_to_empty)) {
info->time = time_to_empty.intval / 60;
} else {
- info->time = calculate_time(status.intval, 0);
+ info->time = calculate_time(status.intval, SOURCE_ENERGY);
+ if (info->time == -1)
+ info->time = calculate_time(status.intval, SOURCE_CHARGE);
if (info->time == -1)
- info->time = calculate_time(status.intval, 1);
+ info->time = calculate_time(status.intval, SOURCE_VOLTAGE);
}
}
--
With best wishes
Dmitry
next reply other threads:[~2008-01-06 12:30 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-01-06 12:30 Dmitry Baryshkov [this message]
2008-01-06 22:53 ` [PATCH 3/3] Anton Vorontsov
2008-01-06 23:12 ` Dmitry
2008-01-07 2:50 ` [PATCH 3/3] apm_power: Support using VOLTAGE_* properties for apm calculations Anton Vorontsov
-- strict thread matches above, loose matches on Subject: below --
2004-08-27 21:53 [patch 3/3] trini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20080106123016.GA13324@doriath.ww600.siemens.net \
--to=dbaryshkov@gmail.com \
--cc=cbou@mail.ru \
--cc=cbouatmailru@gmail.com \
--cc=dwmw2@infradead.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).