From: Salil Mehta <salil.mehta@huawei.com>
To: <davem@davemloft.net>
Cc: <salil.mehta@huawei.com>, <yisen.zhuang@huawei.com>,
<lipeng321@huawei.com>, <mehta.salil@opnsrc.net>,
<netdev@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<linuxarm@huawei.com>, liuzhongzhu <liuzhongzhu@huawei.com>
Subject: [PATCH V2 net-next 3/8] net: hns3: Add "FD flow table" info query function
Date: Thu, 22 Nov 2018 14:09:43 +0000 [thread overview]
Message-ID: <20181122140948.23504-4-salil.mehta@huawei.com> (raw)
In-Reply-To: <20181122140948.23504-1-salil.mehta@huawei.com>
From: liuzhongzhu <liuzhongzhu@huawei.com>
All the Flow Director rules are stored in tcam blocks.
For each bit of tcam entry, the match value
depends on two input value(x, y).
debugfs command:
echo dump fd tcam > cmd
Sample output:
root@(none)# echo dump fd tcam > cmd
hns3 0000:7d:00.0: read result tcam key x(31):
hns3 0000:7d:00.0: 00000000
hns3 0000:7d:00.0: 00000000
hns3 0000:7d:00.0: 00000000
hns3 0000:7d:00.0: 08000000
hns3 0000:7d:00.0: 00000600
hns3 0000:7d:00.0: 00000000
hns3 0000:7d:00.0: 00000000
hns3 0000:7d:00.0: 00000000
hns3 0000:7d:00.0: 00000000
hns3 0000:7d:00.0: 00000000
hns3 0000:7d:00.0: 00000000
hns3 0000:7d:00.0: 00000000
hns3 0000:7d:00.0: 00000000
hns3 0000:7d:00.0: read result tcam key y(31):
hns3 0000:7d:00.0: 00000000
hns3 0000:7d:00.0: 00000000
hns3 0000:7d:00.0: 00000000
hns3 0000:7d:00.0: f7ff0000
hns3 0000:7d:00.0: 0000f900
hns3 0000:7d:00.0: 00000000
hns3 0000:7d:00.0: 00000000
hns3 0000:7d:00.0: 00000000
hns3 0000:7d:00.0: 00000000
hns3 0000:7d:00.0: 00000000
hns3 0000:7d:00.0: 00000000
hns3 0000:7d:00.0: 00000000
hns3 0000:7d:00.0: 0000fff8
root@(none)#
Signed-off-by: liuzhongzhu <liuzhongzhu@huawei.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
---
drivers/net/ethernet/hisilicon/hns3/hnae3.h | 1 +
drivers/net/ethernet/hisilicon/hns3/hns3_debugfs.c | 2 +
.../net/ethernet/hisilicon/hns3/hns3pf/Makefile | 2 +-
.../ethernet/hisilicon/hns3/hns3pf/hclge_debugfs.c | 77 ++++++++++++++++++++++
.../ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 1 +
.../ethernet/hisilicon/hns3/hns3pf/hclge_main.h | 1 +
6 files changed, 83 insertions(+), 1 deletion(-)
create mode 100644 drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_debugfs.c
diff --git a/drivers/net/ethernet/hisilicon/hns3/hnae3.h b/drivers/net/ethernet/hisilicon/hns3/hnae3.h
index f32f075..a1707b7 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hnae3.h
+++ b/drivers/net/ethernet/hisilicon/hns3/hnae3.h
@@ -453,6 +453,7 @@ struct hnae3_ae_ops {
struct ethtool_rxnfc *cmd, u32 *rule_locs);
int (*restore_fd_rules)(struct hnae3_handle *handle);
void (*enable_fd)(struct hnae3_handle *handle, bool enable);
+ int (*dbg_run_cmd)(struct hnae3_handle *handle, char *cmd_buf);
pci_ers_result_t (*process_hw_error)(struct hnae3_ae_dev *ae_dev);
bool (*get_hw_reset_stat)(struct hnae3_handle *handle);
bool (*ae_dev_resetting)(struct hnae3_handle *handle);
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_debugfs.c b/drivers/net/ethernet/hisilicon/hns3/hns3_debugfs.c
index c0685b3..82fe7b9 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3_debugfs.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3_debugfs.c
@@ -200,6 +200,8 @@ static ssize_t hns3_dbg_cmd_write(struct file *filp, const char __user *buffer,
hns3_dbg_help(handle);
else if (strncmp(cmd_buf, "queue info", 10) == 0)
ret = hns3_dbg_queue_info(handle, cmd_buf);
+ else if (handle->ae_algo->ops->dbg_run_cmd)
+ ret = handle->ae_algo->ops->dbg_run_cmd(handle, cmd_buf);
if (ret)
hns3_dbg_help(handle);
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/Makefile b/drivers/net/ethernet/hisilicon/hns3/hns3pf/Makefile
index 580e817..fffe8c1 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/Makefile
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/Makefile
@@ -6,6 +6,6 @@
ccflags-y := -Idrivers/net/ethernet/hisilicon/hns3
obj-$(CONFIG_HNS3_HCLGE) += hclge.o
-hclge-objs = hclge_main.o hclge_cmd.o hclge_mdio.o hclge_tm.o hclge_mbx.o hclge_err.o
+hclge-objs = hclge_main.o hclge_cmd.o hclge_mdio.o hclge_tm.o hclge_mbx.o hclge_err.o hclge_debugfs.o
hclge-$(CONFIG_HNS3_DCB) += hclge_dcb.o
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_debugfs.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_debugfs.c
new file mode 100644
index 0000000..cf1355b
--- /dev/null
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_debugfs.c
@@ -0,0 +1,77 @@
+// SPDX-License-Identifier: GPL-2.0+
+/* Copyright (c) 2018-2019 Hisilicon Limited. */
+
+#include <linux/device.h>
+
+#include "hclge_cmd.h"
+#include "hclge_main.h"
+#include "hnae3.h"
+
+static void hclge_dbg_fd_tcam_read(struct hclge_dev *hdev, u8 stage,
+ bool sel_x, u32 loc)
+{
+ struct hclge_fd_tcam_config_1_cmd *req1;
+ struct hclge_fd_tcam_config_2_cmd *req2;
+ struct hclge_fd_tcam_config_3_cmd *req3;
+ struct hclge_desc desc[3];
+ int ret, i;
+ u32 *req;
+
+ hclge_cmd_setup_basic_desc(&desc[0], HCLGE_OPC_FD_TCAM_OP, true);
+ desc[0].flag |= cpu_to_le16(HCLGE_CMD_FLAG_NEXT);
+ hclge_cmd_setup_basic_desc(&desc[1], HCLGE_OPC_FD_TCAM_OP, true);
+ desc[1].flag |= cpu_to_le16(HCLGE_CMD_FLAG_NEXT);
+ hclge_cmd_setup_basic_desc(&desc[2], HCLGE_OPC_FD_TCAM_OP, true);
+
+ req1 = (struct hclge_fd_tcam_config_1_cmd *)desc[0].data;
+ req2 = (struct hclge_fd_tcam_config_2_cmd *)desc[1].data;
+ req3 = (struct hclge_fd_tcam_config_3_cmd *)desc[2].data;
+
+ req1->stage = stage;
+ req1->xy_sel = sel_x ? 1 : 0;
+ req1->index = cpu_to_le32(loc);
+
+ ret = hclge_cmd_send(&hdev->hw, desc, 3);
+ if (ret)
+ return;
+
+ dev_info(&hdev->pdev->dev, " read result tcam key %s(%u):\n",
+ sel_x ? "x" : "y", loc);
+
+ req = (u32 *)req1->tcam_data;
+ for (i = 0; i < 2; i++)
+ dev_info(&hdev->pdev->dev, "%08x\n", *req++);
+
+ req = (u32 *)req2->tcam_data;
+ for (i = 0; i < 6; i++)
+ dev_info(&hdev->pdev->dev, "%08x\n", *req++);
+
+ req = (u32 *)req3->tcam_data;
+ for (i = 0; i < 5; i++)
+ dev_info(&hdev->pdev->dev, "%08x\n", *req++);
+}
+
+static void hclge_dbg_fd_tcam(struct hclge_dev *hdev)
+{
+ u32 i;
+
+ for (i = 0; i < hdev->fd_cfg.rule_num[0]; i++) {
+ hclge_dbg_fd_tcam_read(hdev, 0, true, i);
+ hclge_dbg_fd_tcam_read(hdev, 0, false, i);
+ }
+}
+
+int hclge_dbg_run_cmd(struct hnae3_handle *handle, char *cmd_buf)
+{
+ struct hclge_vport *vport = hclge_get_vport(handle);
+ struct hclge_dev *hdev = vport->back;
+
+ if (strncmp(cmd_buf, "dump fd tcam", 12) == 0) {
+ hclge_dbg_fd_tcam(hdev);
+ } else {
+ dev_info(&hdev->pdev->dev, "unknown command\n");
+ return -EINVAL;
+ }
+
+ return 0;
+}
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
index f78b8e1..696cb53 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
@@ -7826,6 +7826,7 @@ static const struct hnae3_ae_ops hclge_ops = {
.get_fd_all_rules = hclge_get_all_rules,
.restore_fd_rules = hclge_restore_fd_entries,
.enable_fd = hclge_enable_fd,
+ .dbg_run_cmd = hclge_dbg_run_cmd,
.process_hw_error = hclge_process_ras_hw_error,
.get_hw_reset_stat = hclge_get_hw_reset_stat,
.ae_dev_resetting = hclge_ae_dev_resetting,
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.h b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.h
index 5f24dd4..4122ad1 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.h
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.h
@@ -814,4 +814,5 @@ int hclge_func_reset_cmd(struct hclge_dev *hdev, int func_id);
int hclge_vport_start(struct hclge_vport *vport);
void hclge_vport_stop(struct hclge_vport *vport);
int hclge_set_vport_mtu(struct hclge_vport *vport, int new_mtu);
+int hclge_dbg_run_cmd(struct hnae3_handle *handle, char *cmd_buf);
#endif
--
2.7.4
next prev parent reply other threads:[~2018-11-22 14:11 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-11-22 14:09 [PATCH V2 net-next 0/8] net: hns3: Adds support of debugfs to HNS3 driver Salil Mehta
2018-11-22 14:09 ` [PATCH V2 net-next 1/8] net: hns3: Add debugfs framework registration Salil Mehta
2018-11-22 14:09 ` [PATCH V2 net-next 2/8] net: hns3: Add "queue info" query function Salil Mehta
2018-11-22 14:09 ` Salil Mehta [this message]
2018-11-22 14:09 ` [PATCH V2 net-next 4/8] net: hns3: Add "tc config" info " Salil Mehta
2018-11-22 14:09 ` [PATCH V2 net-next 5/8] net: hns3: Add "tm " Salil Mehta
2018-11-22 14:09 ` [PATCH V2 net-next 6/8] net: hns3: Add "qos pause" config " Salil Mehta
2018-11-22 14:09 ` [PATCH V2 net-next 7/8] net: hns3: Add "qos prio map" " Salil Mehta
2018-11-22 14:09 ` [PATCH V2 net-next 8/8] net: hns3: Add "qos buffer" config " Salil Mehta
2018-11-24 1:29 ` [PATCH V2 net-next 0/8] net: hns3: Adds support of debugfs to HNS3 driver David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181122140948.23504-4-salil.mehta@huawei.com \
--to=salil.mehta@huawei.com \
--cc=davem@davemloft.net \
--cc=linux-kernel@vger.kernel.org \
--cc=linuxarm@huawei.com \
--cc=lipeng321@huawei.com \
--cc=liuzhongzhu@huawei.com \
--cc=mehta.salil@opnsrc.net \
--cc=netdev@vger.kernel.org \
--cc=yisen.zhuang@huawei.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).