linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
To: linux-kernel@vger.kernel.org, dri-devel@lists.freedesktop.org,
	linux-arm-kernel@lists.infradead.org
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>,
	Maxime Ripard <maxime.ripard@bootlin.com>,
	Sean Paul <sean@poorly.run>, David Airlie <airlied@linux.ie>,
	Chen-Yu Tsai <wens@csie.org>,
	Thomas Petazzoni <thomas.petazzoni@bootlin.com>,
	linux-sunxi@googlegroups.com, Daniel Vetter <daniel@ffwll.ch>,
	Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Subject: [PATCH v2 28/43] drm/sun4i: frontend: Add support for planar YUV input formats
Date: Fri, 23 Nov 2018 10:25:00 +0100	[thread overview]
Message-ID: <20181123092515.2511-29-paul.kocialkowski@bootlin.com> (raw)
In-Reply-To: <20181123092515.2511-1-paul.kocialkowski@bootlin.com>

Planar YUV formats come with 3 distinct planes, which requires
configuring the frontend line stride and address registers for the
third plane.

Our hardware only supports the YUV planes order and in order to support
formats with a YVU plane order, a helper is introduced to indicate
whether to invert the address of the two chroma planes.

Missing definitions for YUV411 and YUV444 input format configuration are
also introduced as support is added for these formats. For the input
sequence part, no configuration is required for planar YUV formats so
zero is returned in that case.

Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
---
 drivers/gpu/drm/sun4i/sun4i_frontend.c | 54 +++++++++++++++++++++++++-
 drivers/gpu/drm/sun4i/sun4i_frontend.h |  5 +++
 drivers/gpu/drm/sun4i/sun4i_layer.c    |  8 ++++
 3 files changed, 66 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/sun4i/sun4i_frontend.c b/drivers/gpu/drm/sun4i/sun4i_frontend.c
index e31438e5cabd..001139417cf5 100644
--- a/drivers/gpu/drm/sun4i/sun4i_frontend.c
+++ b/drivers/gpu/drm/sun4i/sun4i_frontend.c
@@ -106,12 +106,27 @@ void sun4i_frontend_exit(struct sun4i_frontend *frontend)
 }
 EXPORT_SYMBOL(sun4i_frontend_exit);
 
+static bool sun4i_frontend_format_chroma_requires_swap(uint32_t fmt)
+{
+	switch (fmt) {
+	case DRM_FORMAT_YVU411:
+	case DRM_FORMAT_YVU420:
+	case DRM_FORMAT_YVU422:
+	case DRM_FORMAT_YVU444:
+		return true;
+
+	default:
+		return false;
+	}
+}
+
 void sun4i_frontend_update_buffer(struct sun4i_frontend *frontend,
 				  struct drm_plane *plane)
 {
 	struct drm_plane_state *state = plane->state;
 	struct drm_framebuffer *fb = state->fb;
 	dma_addr_t paddr;
+	bool swap;
 
 	/* Set the line width */
 	DRM_DEBUG_DRIVER("Frontend stride: %d bytes\n", fb->pitches[0]);
@@ -122,6 +137,13 @@ void sun4i_frontend_update_buffer(struct sun4i_frontend *frontend,
 		regmap_write(frontend->regs, SUN4I_FRONTEND_LINESTRD1_REG,
 			     fb->pitches[1]);
 
+	if (fb->format->num_planes > 2)
+		regmap_write(frontend->regs, SUN4I_FRONTEND_LINESTRD2_REG,
+			     fb->pitches[2]);
+
+	/* Some planar formats require chroma channel swapping by hand. */
+	swap = sun4i_frontend_format_chroma_requires_swap(fb->format->format);
+
 	/* Set the physical address of the buffer in memory */
 	paddr = drm_fb_cma_get_gem_addr(fb, state, 0);
 	paddr -= PHYS_OFFSET;
@@ -129,12 +151,20 @@ void sun4i_frontend_update_buffer(struct sun4i_frontend *frontend,
 	regmap_write(frontend->regs, SUN4I_FRONTEND_BUF_ADDR0_REG, paddr);
 
 	if (fb->format->num_planes > 1) {
-		paddr = drm_fb_cma_get_gem_addr(fb, state, 1);
+		paddr = drm_fb_cma_get_gem_addr(fb, state, swap ? 2 : 1);
 		paddr -= PHYS_OFFSET;
 		DRM_DEBUG_DRIVER("Setting buffer #1 address to %pad\n", &paddr);
 		regmap_write(frontend->regs, SUN4I_FRONTEND_BUF_ADDR1_REG,
 			     paddr);
 	}
+
+	if (fb->format->num_planes > 2) {
+		paddr = drm_fb_cma_get_gem_addr(fb, state, swap ? 1 : 2);
+		paddr -= PHYS_OFFSET;
+		DRM_DEBUG_DRIVER("Setting buffer #2 address to %pad\n", &paddr);
+		regmap_write(frontend->regs, SUN4I_FRONTEND_BUF_ADDR2_REG,
+			     paddr);
+	}
 }
 EXPORT_SYMBOL(sun4i_frontend_update_buffer);
 
@@ -142,10 +172,14 @@ static int sun4i_frontend_drm_format_to_input_fmt(uint32_t fmt, u32 *val)
 {
 	if (!drm_format_is_yuv(fmt))
 		*val = SUN4I_FRONTEND_INPUT_FMT_DATA_FMT_RGB;
+	else if (drm_format_is_yuv_sampling_411(fmt))
+		*val = SUN4I_FRONTEND_INPUT_FMT_DATA_FMT_YUV411;
 	else if (drm_format_is_yuv_sampling_420(fmt))
 		*val = SUN4I_FRONTEND_INPUT_FMT_DATA_FMT_YUV420;
 	else if (drm_format_is_yuv_sampling_422(fmt))
 		*val = SUN4I_FRONTEND_INPUT_FMT_DATA_FMT_YUV422;
+	else if (drm_format_is_yuv_sampling_444(fmt))
+		*val = SUN4I_FRONTEND_INPUT_FMT_DATA_FMT_YUV444;
 	else
 		return -EINVAL;
 
@@ -165,6 +199,10 @@ static int sun4i_frontend_drm_format_to_input_mode(uint32_t fmt, u32 *val)
 		*val = SUN4I_FRONTEND_INPUT_FMT_DATA_MOD_SEMIPLANAR;
 		return 0;
 
+	case 3:
+		*val = SUN4I_FRONTEND_INPUT_FMT_DATA_MOD_PLANAR;
+		return 0;
+
 	default:
 		return -EINVAL;
 	}
@@ -172,6 +210,12 @@ static int sun4i_frontend_drm_format_to_input_mode(uint32_t fmt, u32 *val)
 
 static int sun4i_frontend_drm_format_to_input_sequence(uint32_t fmt, u32 *val)
 {
+	/* Planar formats have an explicit input sequence. */
+	if (drm_format_is_yuv_planar(fmt)) {
+		*val = 0;
+		return 0;
+	}
+
 	switch (fmt) {
 	case DRM_FORMAT_BGRX8888:
 		*val = SUN4I_FRONTEND_INPUT_FMT_DATA_PS_BGRX;
@@ -243,7 +287,15 @@ static const uint32_t sun4i_frontend_formats[] = {
 	DRM_FORMAT_UYVY,
 	DRM_FORMAT_VYUY,
 	DRM_FORMAT_XRGB8888,
+	DRM_FORMAT_YUV411,
+	DRM_FORMAT_YUV420,
+	DRM_FORMAT_YUV422,
+	DRM_FORMAT_YUV444,
 	DRM_FORMAT_YUYV,
+	DRM_FORMAT_YVU411,
+	DRM_FORMAT_YVU420,
+	DRM_FORMAT_YVU422,
+	DRM_FORMAT_YVU444,
 	DRM_FORMAT_YVYU,
 };
 
diff --git a/drivers/gpu/drm/sun4i/sun4i_frontend.h b/drivers/gpu/drm/sun4i/sun4i_frontend.h
index 7d01b4f09b75..54ec71a3e2f4 100644
--- a/drivers/gpu/drm/sun4i/sun4i_frontend.h
+++ b/drivers/gpu/drm/sun4i/sun4i_frontend.h
@@ -23,15 +23,20 @@
 
 #define SUN4I_FRONTEND_BUF_ADDR0_REG		0x020
 #define SUN4I_FRONTEND_BUF_ADDR1_REG		0x024
+#define SUN4I_FRONTEND_BUF_ADDR2_REG		0x028
 
 #define SUN4I_FRONTEND_LINESTRD0_REG		0x040
 #define SUN4I_FRONTEND_LINESTRD1_REG		0x044
+#define SUN4I_FRONTEND_LINESTRD2_REG		0x048
 
 #define SUN4I_FRONTEND_INPUT_FMT_REG		0x04c
+#define SUN4I_FRONTEND_INPUT_FMT_DATA_MOD_PLANAR	(0 << 8)
 #define SUN4I_FRONTEND_INPUT_FMT_DATA_MOD_PACKED	(1 << 8)
 #define SUN4I_FRONTEND_INPUT_FMT_DATA_MOD_SEMIPLANAR	(2 << 8)
+#define SUN4I_FRONTEND_INPUT_FMT_DATA_FMT_YUV444	(0 << 4)
 #define SUN4I_FRONTEND_INPUT_FMT_DATA_FMT_YUV422	(1 << 4)
 #define SUN4I_FRONTEND_INPUT_FMT_DATA_FMT_YUV420	(2 << 4)
+#define SUN4I_FRONTEND_INPUT_FMT_DATA_FMT_YUV411	(3 << 4)
 #define SUN4I_FRONTEND_INPUT_FMT_DATA_FMT_RGB		(5 << 4)
 #define SUN4I_FRONTEND_INPUT_FMT_DATA_PS_UYVY		0
 #define SUN4I_FRONTEND_INPUT_FMT_DATA_PS_YUYV		1
diff --git a/drivers/gpu/drm/sun4i/sun4i_layer.c b/drivers/gpu/drm/sun4i/sun4i_layer.c
index 80c718f06ce8..2fb27819ad20 100644
--- a/drivers/gpu/drm/sun4i/sun4i_layer.c
+++ b/drivers/gpu/drm/sun4i/sun4i_layer.c
@@ -143,7 +143,15 @@ static const uint32_t sun4i_layer_formats[] = {
 	DRM_FORMAT_UYVY,
 	DRM_FORMAT_VYUY,
 	DRM_FORMAT_XRGB8888,
+	DRM_FORMAT_YUV411,
+	DRM_FORMAT_YUV420,
+	DRM_FORMAT_YUV422,
+	DRM_FORMAT_YUV444,
 	DRM_FORMAT_YUYV,
+	DRM_FORMAT_YVU411,
+	DRM_FORMAT_YVU420,
+	DRM_FORMAT_YVU422,
+	DRM_FORMAT_YVU444,
 	DRM_FORMAT_YVYU,
 };
 
-- 
2.19.1


  parent reply	other threads:[~2018-11-23  9:29 UTC|newest]

Thread overview: 79+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-11-23  9:24 [PATCH v2 00/43] drm/sun4i: Support for linear and tiled YUV formats with the frontend Paul Kocialkowski
2018-11-23  9:24 ` [PATCH v2 01/43] drm/sun4i: Cleanup video/YUV source before enabling a layer Paul Kocialkowski
2018-11-27  8:31   ` Maxime Ripard
2018-11-23  9:24 ` [PATCH v2 02/43] drm/sun4i: frontend: Replace ARGB with XRGB as supported format Paul Kocialkowski
2018-11-27  8:31   ` Maxime Ripard
2018-11-23  9:24 ` [PATCH v2 03/43] drm/sun4i: Add TODO comment about supporting scaling with the backend Paul Kocialkowski
2018-11-27  8:31   ` Maxime Ripard
2018-11-23  9:24 ` [PATCH v2 04/43] drm/sun4i: backend: Add a helper and a list for supported formats Paul Kocialkowski
2018-11-27  8:38   ` Maxime Ripard
2018-11-23  9:24 ` [PATCH v2 05/43] drm/sun4i: frontend: " Paul Kocialkowski
2018-11-27  8:38   ` Maxime Ripard
2018-11-23  9:24 ` [PATCH v2 06/43] drm/sun4i: backend: Refine the logic behind using the frontend Paul Kocialkowski
2018-11-27  8:39   ` Maxime Ripard
2018-11-23  9:24 ` [PATCH v2 07/43] drm/sun4i: backend: Use a specific function to check if a plane is supported Paul Kocialkowski
2018-11-27  8:41   ` Maxime Ripard
2018-11-23  9:24 ` [PATCH v2 08/43] drm/fourcc: Add helper to check if a format uses a YUV colorspace Paul Kocialkowski
2018-11-27  8:49   ` Maxime Ripard
2018-11-23  9:24 ` [PATCH v2 09/43] drm/fourcc: Add format info helpers for checking YUV planes disposition Paul Kocialkowski
2018-11-27  8:49   ` Maxime Ripard
2018-11-23  9:24 ` [PATCH v2 10/43] drm/fourcc: Add format " Paul Kocialkowski
2018-11-27  8:49   ` Maxime Ripard
2018-11-23  9:24 ` [PATCH v2 11/43] drm/fourcc: Add format info helpers for checking YUV sub-sampling Paul Kocialkowski
2018-11-27  8:49   ` Maxime Ripard
2018-11-23  9:24 ` [PATCH v2 12/43] drm/fourcc: Add format " Paul Kocialkowski
2018-11-23 16:55   ` Ayan Halder
2018-11-23 17:23     ` Ville Syrjälä
2018-11-26  9:03       ` Paul Kocialkowski
2018-11-23  9:24 ` [PATCH v2 13/43] drm/sun4i: backend: Use explicit fourcc helpers for packed YUV422 check Paul Kocialkowski
2018-11-27  8:51   ` Maxime Ripard
2018-11-23  9:24 ` [PATCH v2 14/43] drm/sun4i: backend: Avoid counting YUV planes that use the frontend Paul Kocialkowski
2018-11-27  8:52   ` Maxime Ripard
2018-11-23  9:24 ` [PATCH v2 15/43] drm/sun4i: Rename sun4i_backend_layer_formats to sun4i_layer_formats Paul Kocialkowski
2018-11-27  8:52   ` Maxime Ripard
2018-11-23  9:24 ` [PATCH v2 16/43] drm/sun4i: frontend: Move CSC bypass setup to format update routine Paul Kocialkowski
2018-11-27  8:53   ` Maxime Ripard
2018-11-23  9:24 ` [PATCH v2 17/43] drm/sun4i: frontend: Add helpers for input data mode and pixel sequence Paul Kocialkowski
2018-11-27  8:53   ` Maxime Ripard
2018-11-23  9:24 ` [PATCH v2 18/43] drm/sun4i: frontend: Add proper definitions for format registers Paul Kocialkowski
2018-11-27  8:54   ` Maxime Ripard
2018-11-23  9:24 ` [PATCH v2 19/43] drm/sun4i: frontend: Determine input mode based on the number of planes Paul Kocialkowski
2018-11-27  8:55   ` Maxime Ripard
2018-11-23  9:24 ` [PATCH v2 20/43] drm/sun4i: frontend: Determine input format based on colorspace Paul Kocialkowski
2018-11-23  9:24 ` [PATCH v2 21/43] drm/sun4i: frontend: Add support for the BGRX8888 input format Paul Kocialkowski
2018-11-27  8:57   ` Maxime Ripard
2018-11-23  9:24 ` [PATCH v2 22/43] drm/sun4i: frontend: Add support for the BGRX8888 output format Paul Kocialkowski
2018-11-27  9:04   ` Maxime Ripard
2018-11-23  9:24 ` [PATCH v2 23/43] drm/sun4i: backend: Detail the YUV to RGB values coding explanation Paul Kocialkowski
2018-11-27  8:57   ` Maxime Ripard
2018-11-23  9:24 ` [PATCH v2 24/43] drm/sun4i: frontend: Configure and enable YUV to RGB CSC when needed Paul Kocialkowski
2018-11-23  9:24 ` [PATCH v2 25/43] drm/sun4i: frontend: Apply format sub-sampling to CH1 dimensions Paul Kocialkowski
2018-11-27  8:58   ` Maxime Ripard
2018-11-23  9:24 ` [PATCH v2 26/43] drm/sun4i: frontend: Add support for packed YUV422 input formats Paul Kocialkowski
2018-11-23  9:24 ` [PATCH v2 27/43] drm/sun4i: frontend: Add support for semi-planar YUV " Paul Kocialkowski
2018-11-27  9:00   ` Maxime Ripard
2018-11-23  9:25 ` Paul Kocialkowski [this message]
2018-11-23  9:25 ` [PATCH v2 29/43] drm/sun4i: Make pitch even for GEM dumb alloc as per hardware constraint Paul Kocialkowski
2018-11-27  9:02   ` Maxime Ripard
2018-11-23  9:25 ` [PATCH v2 30/43] drm/fourcc: Add definitions for Allwinner vendor and VPU tiled format Paul Kocialkowski
2018-11-27  9:02   ` Maxime Ripard
2018-11-23  9:25 ` [PATCH v2 31/43] drm/sun4i: Add a dedicated ioctl call for allocating tiled buffers Paul Kocialkowski
2018-11-23 11:30   ` Brian Starkey
2018-11-23 12:52     ` Paul Kocialkowski
2018-11-27  9:03     ` Maxime Ripard
2018-11-23  9:25 ` [PATCH v2 32/43] drm/sun4i: Pass modifier to backend and frontend format support helpers Paul Kocialkowski
2018-11-27  9:13   ` Maxime Ripard
2018-11-23  9:25 ` [PATCH v2 33/43] drm/sun4i: frontend: Add support for tiled YUV input mode configuration Paul Kocialkowski
2018-11-23  9:25 ` [PATCH v2 34/43] drm/sun4i: Add buffer stride and offset configuration for tiling mode Paul Kocialkowski
2018-11-27  9:24   ` Maxime Ripard
2018-12-04 13:30     ` Paul Kocialkowski
2018-11-23  9:25 ` [PATCH v2 35/43] drm/sun4i: frontend: Add and use helper for checking tiling support Paul Kocialkowski
2018-11-23  9:25 ` [PATCH v2 36/43] drm/sun4i: layer: Add tiled modifier support and helper Paul Kocialkowski
2018-11-23  9:25 ` [PATCH v2 37/43] drm/sun4i: drv: Allow framebuffer modifiers in mode config Paul Kocialkowski
2018-11-23  9:25 ` [PATCH v2 38/43] drm/sun4i: Move access control before setting the register as documented Paul Kocialkowski
2018-11-27  9:26   ` Maxime Ripard
2018-11-23  9:25 ` [PATCH v2 39/43] drm/sun4i: frontend: Add a quirk structure Paul Kocialkowski
2018-11-23  9:25 ` [PATCH v2 40/43] drm/sun4i: Set the coef_rdy bit right after the coef have been set Paul Kocialkowski
2018-11-23  9:25 ` [PATCH v2 41/43] drm/sun4i: Make COEF_RDY conditional Paul Kocialkowski
2018-11-23  9:25 ` [PATCH v2 42/43] drm/sun4i: frontend: Move the FIR filter phases to our quirks Paul Kocialkowski
2018-11-23  9:25 ` [PATCH v2 43/43] drm/sun4i: frontend: Add A20-specific device-tree compatible and quirks Paul Kocialkowski

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20181123092515.2511-29-paul.kocialkowski@bootlin.com \
    --to=paul.kocialkowski@bootlin.com \
    --cc=airlied@linux.ie \
    --cc=daniel@ffwll.ch \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-sunxi@googlegroups.com \
    --cc=maarten.lankhorst@linux.intel.com \
    --cc=maxime.ripard@bootlin.com \
    --cc=sean@poorly.run \
    --cc=thomas.petazzoni@bootlin.com \
    --cc=wens@csie.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).