linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Ard Biesheuvel <ard.biesheuvel@linaro.org>
To: linux-efi@vger.kernel.org, Ingo Molnar <mingo@kernel.org>,
	Thomas Gleixner <tglx@linutronix.de>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>, linux-kernel@vger.kernel.org
Subject: [PATCH 1/1] efi: prevent GICv3 WARN() by mapping memreserve table before first use
Date: Fri, 23 Nov 2018 22:51:32 +0100	[thread overview]
Message-ID: <20181123215132.7951-2-ard.biesheuvel@linaro.org> (raw)
In-Reply-To: <20181123215132.7951-1-ard.biesheuvel@linaro.org>

Mapping the MEMRESERVE EFI configuration table from an early initcall
is too late: the GICv3 ITS code that creates persistent reservations
for the boot CPU's LPI tables is invoked from init_IRQ(), which runs
much earlier than the handling of the initcalls. This results in a
WARN() splat because the LPI tables cannot be reserved persistently,
which will result in silent memory corruption after a kexec reboot.

So instead, invoke the initialization performed by the initcall from
efi_mem_reserve_persistent() itself as well, but keep the initcall so
that the init is guaranteed to have been called before SMP boot.

Fixes: 63eb322d89c8 ("efi: Permit calling efi_mem_reserve_persistent() ...")
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Marc Zyngier <marc.zyngier@arm.com>
Tested-by: Jan Glauber <jglauber@cavium.com>
Tested-by: John Garry <john.garry@huawei.com>
---
 drivers/firmware/efi/efi.c | 36 ++++++++++++++++++++++++++----------
 1 file changed, 26 insertions(+), 10 deletions(-)

diff --git a/drivers/firmware/efi/efi.c b/drivers/firmware/efi/efi.c
index fad7c62cfc0e..415849bab233 100644
--- a/drivers/firmware/efi/efi.c
+++ b/drivers/firmware/efi/efi.c
@@ -969,13 +969,33 @@ bool efi_is_table_address(unsigned long phys_addr)
 static DEFINE_SPINLOCK(efi_mem_reserve_persistent_lock);
 static struct linux_efi_memreserve *efi_memreserve_root __ro_after_init;
 
-int efi_mem_reserve_persistent(phys_addr_t addr, u64 size)
+static int __init efi_memreserve_map_root(void)
+{
+	if (efi.mem_reserve == EFI_INVALID_TABLE_ADDR)
+		return -ENODEV;
+
+	efi_memreserve_root = memremap(efi.mem_reserve,
+				       sizeof(*efi_memreserve_root),
+				       MEMREMAP_WB);
+	if (WARN_ON_ONCE(!efi_memreserve_root))
+		return -ENOMEM;
+	return 0;
+}
+
+int __ref efi_mem_reserve_persistent(phys_addr_t addr, u64 size)
 {
 	struct linux_efi_memreserve *rsv;
+	int rc;
 
-	if (!efi_memreserve_root)
+	if (efi_memreserve_root == (void *)ULONG_MAX)
 		return -ENODEV;
 
+	if (!efi_memreserve_root) {
+		rc = efi_memreserve_map_root();
+		if (rc)
+			return rc;
+	}
+
 	rsv = kmalloc(sizeof(*rsv), GFP_ATOMIC);
 	if (!rsv)
 		return -ENOMEM;
@@ -993,14 +1013,10 @@ int efi_mem_reserve_persistent(phys_addr_t addr, u64 size)
 
 static int __init efi_memreserve_root_init(void)
 {
-	if (efi.mem_reserve == EFI_INVALID_TABLE_ADDR)
-		return -ENODEV;
-
-	efi_memreserve_root = memremap(efi.mem_reserve,
-				       sizeof(*efi_memreserve_root),
-				       MEMREMAP_WB);
-	if (!efi_memreserve_root)
-		return -ENOMEM;
+	if (efi_memreserve_root)
+		return 0;
+	if (efi_memreserve_map_root())
+		efi_memreserve_root = (void *)ULONG_MAX;
 	return 0;
 }
 early_initcall(efi_memreserve_root_init);
-- 
2.19.1


  reply	other threads:[~2018-11-23 21:52 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-11-23 21:51 [GIT PULL 0/1] EFI fix for v4.20 Ard Biesheuvel
2018-11-23 21:51 ` Ard Biesheuvel [this message]
2018-11-27 13:30   ` [tip:efi/urgent] efi: Prevent GICv3 WARN() by mapping the memreserve table before first use tip-bot for Ard Biesheuvel

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20181123215132.7951-2-ard.biesheuvel@linaro.org \
    --to=ard.biesheuvel@linaro.org \
    --cc=linux-efi@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mingo@kernel.org \
    --cc=tglx@linutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).