[04/10] regulator: max8952: Let core handle GPIO descriptor
diff mbox series

Message ID 20181128104350.31902-5-linus.walleij@linaro.org
State Superseded
Headers show
Series
  • Regulator ena_gpiod fixups
Related show

Commit Message

Linus Walleij Nov. 28, 2018, 10:43 a.m. UTC
Use the gpiod_get() rather than the devm_* version so that the
regulator core can handle the lifecycle of these descriptors.

Fixes: d7a261c2d1f2 ("regulator: max8952: Pass descriptor instead of GPIO number")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
 drivers/regulator/max8952.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

Patch
diff mbox series

diff --git a/drivers/regulator/max8952.c b/drivers/regulator/max8952.c
index 6c39fff73b8a..baa8b771a6e4 100644
--- a/drivers/regulator/max8952.c
+++ b/drivers/regulator/max8952.c
@@ -231,9 +231,9 @@  static int max8952_pmic_probe(struct i2c_client *client,
 	else
 		gflags = GPIOD_OUT_LOW;
 	gflags |= GPIOD_FLAGS_BIT_NONEXCLUSIVE;
-	gpiod = devm_gpiod_get_optional(&client->dev,
-					"max8952,en",
-					gflags);
+	gpiod = gpiod_get_optional(&client->dev,
+				   "max8952,en",
+				   gflags);
 	if (IS_ERR(gpiod))
 		return PTR_ERR(gpiod);
 	if (gpiod)
@@ -241,6 +241,8 @@  static int max8952_pmic_probe(struct i2c_client *client,
 
 	rdev = devm_regulator_register(&client->dev, &regulator, &config);
 	if (IS_ERR(rdev)) {
+		if (gpiod)
+			gpiod_put(gpiod);
 		ret = PTR_ERR(rdev);
 		dev_err(&client->dev, "regulator init failed (%d)\n", ret);
 		return ret;