From: Christophe Leroy <christophe.leroy@c-s.fr>
To: Benjamin Herrenschmidt <benh@kernel.crashing.org>,
Paul Mackerras <paulus@samba.org>,
Michael Ellerman <mpe@ellerman.id.au>
Cc: linux-kernel@vger.kernel.org, linuxppc-dev@lists.ozlabs.org
Subject: [PATCH v10 7/9] powerpc/32: Remove CURRENT_THREAD_INFO and rename TI_CPU
Date: Wed, 28 Nov 2018 12:12:37 +0000 (UTC) [thread overview]
Message-ID: <3b9a51e6106678476a7efc3dcde5d933106d9310.1543407004.git.christophe.leroy@c-s.fr> (raw)
In-Reply-To: <cover.1543407004.git.christophe.leroy@c-s.fr>
Now that thread_info is similar to task_struct, it's address is in r2
so CURRENT_THREAD_INFO() macro is useless. This patch removes it.
At the same time, as the 'cpu' field is not anymore in thread_info,
this patch renames it to TASK_CPU.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
---
arch/powerpc/Makefile | 2 +-
arch/powerpc/include/asm/thread_info.h | 2 --
arch/powerpc/kernel/asm-offsets.c | 2 +-
arch/powerpc/kernel/entry_32.S | 43 ++++++++++++----------------------
arch/powerpc/kernel/epapr_hcalls.S | 5 ++--
arch/powerpc/kernel/head_fsl_booke.S | 5 ++--
arch/powerpc/kernel/idle_6xx.S | 8 +++----
arch/powerpc/kernel/idle_e500.S | 8 +++----
arch/powerpc/kernel/misc_32.S | 3 +--
arch/powerpc/mm/hash_low_32.S | 14 ++++-------
arch/powerpc/sysdev/6xx-suspend.S | 5 ++--
11 files changed, 35 insertions(+), 62 deletions(-)
diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile
index e04e988c86b1..d43c4036bb74 100644
--- a/arch/powerpc/Makefile
+++ b/arch/powerpc/Makefile
@@ -425,7 +425,7 @@ ifdef CONFIG_SMP
prepare: task_cpu_prepare
task_cpu_prepare: prepare0
- $(eval KBUILD_CFLAGS += -D_TASK_CPU=$(shell awk '{if ($$2 == "TI_CPU") print $$3;}' include/generated/asm-offsets.h))
+ $(eval KBUILD_CFLAGS += -D_TASK_CPU=$(shell awk '{if ($$2 == "TASK_CPU") print $$3;}' include/generated/asm-offsets.h))
endif
# Check toolchain versions:
diff --git a/arch/powerpc/include/asm/thread_info.h b/arch/powerpc/include/asm/thread_info.h
index d91523c2c7d8..c959b8d66cac 100644
--- a/arch/powerpc/include/asm/thread_info.h
+++ b/arch/powerpc/include/asm/thread_info.h
@@ -19,8 +19,6 @@
#ifdef CONFIG_PPC64
#define CURRENT_THREAD_INFO(dest, sp) stringify_in_c(ld dest, PACACURRENT(r13))
-#else
-#define CURRENT_THREAD_INFO(dest, sp) stringify_in_c(mr dest, r2)
#endif
#ifndef __ASSEMBLY__
diff --git a/arch/powerpc/kernel/asm-offsets.c b/arch/powerpc/kernel/asm-offsets.c
index 94ac190a0b16..03439785c2ea 100644
--- a/arch/powerpc/kernel/asm-offsets.c
+++ b/arch/powerpc/kernel/asm-offsets.c
@@ -96,7 +96,7 @@ int main(void)
#endif /* CONFIG_PPC64 */
OFFSET(TASK_STACK, task_struct, stack);
#ifdef CONFIG_SMP
- OFFSET(TI_CPU, task_struct, cpu);
+ OFFSET(TASK_CPU, task_struct, cpu);
#endif
#ifdef CONFIG_LIVEPATCH
diff --git a/arch/powerpc/kernel/entry_32.S b/arch/powerpc/kernel/entry_32.S
index bd3b146e18a3..d0c546ce387e 100644
--- a/arch/powerpc/kernel/entry_32.S
+++ b/arch/powerpc/kernel/entry_32.S
@@ -168,8 +168,7 @@ transfer_to_handler:
tophys(r11,r11)
addi r11,r11,global_dbcr0@l
#ifdef CONFIG_SMP
- CURRENT_THREAD_INFO(r9, r1)
- lwz r9,TI_CPU(r9)
+ lwz r9,TASK_CPU(r2)
slwi r9,r9,3
add r11,r11,r9
#endif
@@ -180,8 +179,7 @@ transfer_to_handler:
stw r12,4(r11)
#endif
#ifdef CONFIG_VIRT_CPU_ACCOUNTING_NATIVE
- CURRENT_THREAD_INFO(r9, r1)
- tophys(r9, r9)
+ tophys(r9, r2)
ACCOUNT_CPU_USER_ENTRY(r9, r11, r12)
#endif
@@ -195,8 +193,7 @@ transfer_to_handler:
ble- stack_ovf /* then the kernel stack overflowed */
5:
#if defined(CONFIG_6xx) || defined(CONFIG_E500)
- CURRENT_THREAD_INFO(r9, r1)
- tophys(r9,r9) /* check local flags */
+ tophys(r9,r2) /* check local flags */
lwz r12,TI_LOCAL_FLAGS(r9)
mtcrf 0x01,r12
bt- 31-TLF_NAPPING,4f
@@ -345,8 +342,7 @@ _GLOBAL(DoSyscall)
mtmsr r11
1:
#endif /* CONFIG_TRACE_IRQFLAGS */
- CURRENT_THREAD_INFO(r10, r1)
- lwz r11,TI_FLAGS(r10)
+ lwz r11,TI_FLAGS(r2)
andi. r11,r11,_TIF_SYSCALL_DOTRACE
bne- syscall_dotrace
syscall_dotrace_cont:
@@ -379,13 +375,12 @@ ret_from_syscall:
lwz r3,GPR3(r1)
#endif
mr r6,r3
- CURRENT_THREAD_INFO(r12, r1)
/* disable interrupts so current_thread_info()->flags can't change */
LOAD_MSR_KERNEL(r10,MSR_KERNEL) /* doesn't include MSR_EE */
/* Note: We don't bother telling lockdep about it */
SYNC
MTMSRD(r10)
- lwz r9,TI_FLAGS(r12)
+ lwz r9,TI_FLAGS(r2)
li r8,-MAX_ERRNO
andi. r0,r9,(_TIF_SYSCALL_DOTRACE|_TIF_SINGLESTEP|_TIF_USER_WORK_MASK|_TIF_PERSYSCALL_MASK)
bne- syscall_exit_work
@@ -432,8 +427,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_NEED_PAIRED_STWCX)
#ifdef CONFIG_VIRT_CPU_ACCOUNTING_NATIVE
andi. r4,r8,MSR_PR
beq 3f
- CURRENT_THREAD_INFO(r4, r1)
- ACCOUNT_CPU_USER_EXIT(r4, r5, r7)
+ ACCOUNT_CPU_USER_EXIT(r2, r5, r7)
3:
#endif
lwz r4,_LINK(r1)
@@ -526,7 +520,7 @@ syscall_exit_work:
/* Clear per-syscall TIF flags if any are set. */
li r11,_TIF_PERSYSCALL_MASK
- addi r12,r12,TI_FLAGS
+ addi r12,r2,TI_FLAGS
3: lwarx r8,0,r12
andc r8,r8,r11
#ifdef CONFIG_IBM405_ERR77
@@ -534,7 +528,6 @@ syscall_exit_work:
#endif
stwcx. r8,0,r12
bne- 3b
- subi r12,r12,TI_FLAGS
4: /* Anything which requires enabling interrupts? */
andi. r0,r9,(_TIF_SYSCALL_DOTRACE|_TIF_SINGLESTEP)
@@ -813,8 +806,7 @@ ret_from_except:
user_exc_return: /* r10 contains MSR_KERNEL here */
/* Check current_thread_info()->flags */
- CURRENT_THREAD_INFO(r9, r1)
- lwz r9,TI_FLAGS(r9)
+ lwz r9,TI_FLAGS(r2)
andi. r0,r9,_TIF_USER_WORK_MASK
bne do_work
@@ -827,8 +819,7 @@ restore_user:
bnel- load_dbcr0
#endif
#ifdef CONFIG_VIRT_CPU_ACCOUNTING_NATIVE
- CURRENT_THREAD_INFO(r9, r1)
- ACCOUNT_CPU_USER_EXIT(r9, r10, r11)
+ ACCOUNT_CPU_USER_EXIT(r2, r10, r11)
#endif
b restore
@@ -836,8 +827,7 @@ restore_user:
/* N.B. the only way to get here is from the beq following ret_from_except. */
resume_kernel:
/* check current_thread_info, _TIF_EMULATE_STACK_STORE */
- CURRENT_THREAD_INFO(r9, r1)
- lwz r8,TI_FLAGS(r9)
+ lwz r8,TI_FLAGS(r2)
andis. r0,r8,_TIF_EMULATE_STACK_STORE@h
beq+ 1f
@@ -863,7 +853,7 @@ resume_kernel:
/* Clear _TIF_EMULATE_STACK_STORE flag */
lis r11,_TIF_EMULATE_STACK_STORE@h
- addi r5,r9,TI_FLAGS
+ addi r5,r2,TI_FLAGS
0: lwarx r8,0,r5
andc r8,r8,r11
#ifdef CONFIG_IBM405_ERR77
@@ -875,7 +865,7 @@ resume_kernel:
#ifdef CONFIG_PREEMPT
/* check current_thread_info->preempt_count */
- lwz r0,TI_PREEMPT(r9)
+ lwz r0,TI_PREEMPT(r2)
cmpwi 0,r0,0 /* if non-zero, just restore regs and return */
bne restore
andi. r8,r8,_TIF_NEED_RESCHED
@@ -891,8 +881,7 @@ resume_kernel:
bl trace_hardirqs_off
#endif
1: bl preempt_schedule_irq
- CURRENT_THREAD_INFO(r9, r1)
- lwz r3,TI_FLAGS(r9)
+ lwz r3,TI_FLAGS(r2)
andi. r0,r3,_TIF_NEED_RESCHED
bne- 1b
#ifdef CONFIG_TRACE_IRQFLAGS
@@ -1191,8 +1180,7 @@ load_dbcr0:
lis r11,global_dbcr0@ha
addi r11,r11,global_dbcr0@l
#ifdef CONFIG_SMP
- CURRENT_THREAD_INFO(r9, r1)
- lwz r9,TI_CPU(r9)
+ lwz r9,TASK_CPU(r2)
slwi r9,r9,3
add r11,r11,r9
#endif
@@ -1232,8 +1220,7 @@ recheck:
LOAD_MSR_KERNEL(r10,MSR_KERNEL)
SYNC
MTMSRD(r10) /* disable interrupts */
- CURRENT_THREAD_INFO(r9, r1)
- lwz r9,TI_FLAGS(r9)
+ lwz r9,TI_FLAGS(r2)
andi. r0,r9,_TIF_NEED_RESCHED
bne- do_resched
andi. r0,r9,_TIF_USER_WORK_MASK
diff --git a/arch/powerpc/kernel/epapr_hcalls.S b/arch/powerpc/kernel/epapr_hcalls.S
index 52ca2471ee1a..d252f4663a23 100644
--- a/arch/powerpc/kernel/epapr_hcalls.S
+++ b/arch/powerpc/kernel/epapr_hcalls.S
@@ -21,10 +21,9 @@
#ifndef CONFIG_PPC64
/* epapr_ev_idle() was derived from e500_idle() */
_GLOBAL(epapr_ev_idle)
- CURRENT_THREAD_INFO(r3, r1)
- PPC_LL r4, TI_LOCAL_FLAGS(r3) /* set napping bit */
+ PPC_LL r4, TI_LOCAL_FLAGS(r2) /* set napping bit */
ori r4, r4,_TLF_NAPPING /* so when we take an exception */
- PPC_STL r4, TI_LOCAL_FLAGS(r3) /* it will return to our caller */
+ PPC_STL r4, TI_LOCAL_FLAGS(r2) /* it will return to our caller */
wrteei 1
diff --git a/arch/powerpc/kernel/head_fsl_booke.S b/arch/powerpc/kernel/head_fsl_booke.S
index 0d27bfff52dd..38918f82bc5b 100644
--- a/arch/powerpc/kernel/head_fsl_booke.S
+++ b/arch/powerpc/kernel/head_fsl_booke.S
@@ -244,8 +244,7 @@ set_ivor:
stwu r0,THREAD_SIZE-STACK_FRAME_OVERHEAD(r1)
#ifdef CONFIG_SMP
- CURRENT_THREAD_INFO(r22, r1)
- stw r24, TI_CPU(r22)
+ stw r24, TASK_CPU(r2)
#endif
bl early_init
@@ -704,7 +703,7 @@ finish_tlb_load:
/* Get the next_tlbcam_idx percpu var */
#ifdef CONFIG_SMP
- lwz r15, TI_CPU-THREAD(r12)
+ lwz r15, TASK_CPU-THREAD(r12)
lis r14, __per_cpu_offset@h
ori r14, r14, __per_cpu_offset@l
rlwinm r15, r15, 2, 0, 29
diff --git a/arch/powerpc/kernel/idle_6xx.S b/arch/powerpc/kernel/idle_6xx.S
index ff026c9d3cab..5afd2e236990 100644
--- a/arch/powerpc/kernel/idle_6xx.S
+++ b/arch/powerpc/kernel/idle_6xx.S
@@ -136,10 +136,9 @@ BEGIN_FTR_SECTION
DSSALL
sync
END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
- CURRENT_THREAD_INFO(r9, r1)
- lwz r8,TI_LOCAL_FLAGS(r9) /* set napping bit */
+ lwz r8,TI_LOCAL_FLAGS(r2) /* set napping bit */
ori r8,r8,_TLF_NAPPING /* so when we take an exception */
- stw r8,TI_LOCAL_FLAGS(r9) /* it will return to our caller */
+ stw r8,TI_LOCAL_FLAGS(r2) /* it will return to our caller */
mfmsr r7
ori r7,r7,MSR_EE
oris r7,r7,MSR_POW@h
@@ -159,8 +158,7 @@ _GLOBAL(power_save_ppc32_restore)
stw r9,_NIP(r11) /* make it do a blr */
#ifdef CONFIG_SMP
- CURRENT_THREAD_INFO(r12, r11)
- lwz r11,TI_CPU(r12) /* get cpu number * 4 */
+ lwz r11,TASK_CPU(r2) /* get cpu number * 4 */
slwi r11,r11,2
#else
li r11,0
diff --git a/arch/powerpc/kernel/idle_e500.S b/arch/powerpc/kernel/idle_e500.S
index 583e55ac7d26..69dfcd2ca011 100644
--- a/arch/powerpc/kernel/idle_e500.S
+++ b/arch/powerpc/kernel/idle_e500.S
@@ -22,10 +22,9 @@
.text
_GLOBAL(e500_idle)
- CURRENT_THREAD_INFO(r3, r1)
- lwz r4,TI_LOCAL_FLAGS(r3) /* set napping bit */
+ lwz r4,TI_LOCAL_FLAGS(r2) /* set napping bit */
ori r4,r4,_TLF_NAPPING /* so when we take an exception */
- stw r4,TI_LOCAL_FLAGS(r3) /* it will return to our caller */
+ stw r4,TI_LOCAL_FLAGS(r2) /* it will return to our caller */
#ifdef CONFIG_PPC_E500MC
wrteei 1
@@ -88,8 +87,7 @@ _GLOBAL(power_save_ppc32_restore)
stw r9,_NIP(r11) /* make it do a blr */
#ifdef CONFIG_SMP
- CURRENT_THREAD_INFO(r12, r1)
- lwz r11,TI_CPU(r12) /* get cpu number * 4 */
+ lwz r11,TASK_CPU(r2) /* get cpu number * 4 */
slwi r11,r11,2
#else
li r11,0
diff --git a/arch/powerpc/kernel/misc_32.S b/arch/powerpc/kernel/misc_32.S
index a3663ad62f16..0e4da0fe5cbf 100644
--- a/arch/powerpc/kernel/misc_32.S
+++ b/arch/powerpc/kernel/misc_32.S
@@ -183,8 +183,7 @@ _GLOBAL(low_choose_750fx_pll)
#ifdef CONFIG_SMP
/* Store new HID1 image */
- CURRENT_THREAD_INFO(r6, r1)
- lwz r6,TI_CPU(r6)
+ lwz r6,TASK_CPU(r2)
slwi r6,r6,2
#else
li r6, 0
diff --git a/arch/powerpc/mm/hash_low_32.S b/arch/powerpc/mm/hash_low_32.S
index 26acf6c8c20c..27edbfddebaa 100644
--- a/arch/powerpc/mm/hash_low_32.S
+++ b/arch/powerpc/mm/hash_low_32.S
@@ -185,8 +185,7 @@ _GLOBAL(add_hash_page)
add r3,r3,r0 /* note create_hpte trims to 24 bits */
#ifdef CONFIG_SMP
- CURRENT_THREAD_INFO(r8, r1) /* use cpu number to make tag */
- lwz r8,TI_CPU(r8) /* to go in mmu_hash_lock */
+ lwz r8,TASK_CPU(r2) /* to go in mmu_hash_lock */
oris r8,r8,12
#endif /* CONFIG_SMP */
@@ -546,9 +545,8 @@ _GLOBAL(flush_hash_pages)
#ifdef CONFIG_SMP
addis r9,r7,mmu_hash_lock@ha
addi r9,r9,mmu_hash_lock@l
- CURRENT_THREAD_INFO(r8, r1)
- add r8,r8,r7
- lwz r8,TI_CPU(r8)
+ add r8,r2,r7
+ lwz r8,TASK_CPU(r8)
oris r8,r8,9
10: lwarx r0,0,r9
cmpi 0,r0,0
@@ -641,8 +639,7 @@ EXPORT_SYMBOL(flush_hash_pages)
*/
_GLOBAL(_tlbie)
#ifdef CONFIG_SMP
- CURRENT_THREAD_INFO(r8, r1)
- lwz r8,TI_CPU(r8)
+ lwz r8,TASK_CPU(r2)
oris r8,r8,11
mfmsr r10
SYNC
@@ -679,8 +676,7 @@ _GLOBAL(_tlbie)
*/
_GLOBAL(_tlbia)
#if defined(CONFIG_SMP)
- CURRENT_THREAD_INFO(r8, r1)
- lwz r8,TI_CPU(r8)
+ lwz r8,TASK_CPU(r2)
oris r8,r8,10
mfmsr r10
SYNC
diff --git a/arch/powerpc/sysdev/6xx-suspend.S b/arch/powerpc/sysdev/6xx-suspend.S
index cf48e9cb2575..6c4aec25c4ba 100644
--- a/arch/powerpc/sysdev/6xx-suspend.S
+++ b/arch/powerpc/sysdev/6xx-suspend.S
@@ -29,10 +29,9 @@ _GLOBAL(mpc6xx_enter_standby)
ori r5, r5, ret_from_standby@l
mtlr r5
- CURRENT_THREAD_INFO(r5, r1)
- lwz r6, TI_LOCAL_FLAGS(r5)
+ lwz r6, TI_LOCAL_FLAGS(r2)
ori r6, r6, _TLF_SLEEPING
- stw r6, TI_LOCAL_FLAGS(r5)
+ stw r6, TI_LOCAL_FLAGS(r2)
mfmsr r5
ori r5, r5, MSR_EE
--
2.13.3
next prev parent reply other threads:[~2018-11-28 12:12 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-11-28 12:12 [PATCH v10 0/9] powerpc: Switch to CONFIG_THREAD_INFO_IN_TASK Christophe Leroy
2018-11-28 12:12 ` [PATCH v10 1/9] book3s/64: avoid circular header inclusion in mmu-hash.h Christophe Leroy
2018-11-28 12:12 ` [PATCH v10 2/9] powerpc: Only use task_struct 'cpu' field on SMP Christophe Leroy
2018-11-28 12:12 ` [PATCH v10 3/9] powerpc: Prepare for moving thread_info into task_struct Christophe Leroy
2018-11-28 12:12 ` [PATCH v10 4/9] powerpc: Activate CONFIG_THREAD_INFO_IN_TASK Christophe Leroy
2018-11-28 12:12 ` [PATCH v10 5/9] powerpc: regain entire stack space Christophe Leroy
2018-11-28 12:12 ` [PATCH v10 6/9] powerpc: 'current_set' is now a table of task_struct pointers Christophe Leroy
2018-11-28 12:12 ` Christophe Leroy [this message]
2018-11-28 12:12 ` [PATCH v10 8/9] powerpc/64: Remove CURRENT_THREAD_INFO Christophe Leroy
2018-11-28 12:12 ` [PATCH v10 9/9] powerpc: clean stack pointers naming Christophe Leroy
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3b9a51e6106678476a7efc3dcde5d933106d9310.1543407004.git.christophe.leroy@c-s.fr \
--to=christophe.leroy@c-s.fr \
--cc=benh@kernel.crashing.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=mpe@ellerman.id.au \
--cc=paulus@samba.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).