linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Abel Vesa <abel.vesa@nxp.com>
To: Sascha Hauer <kernel@pengutronix.de>,
	Lucas Stach <l.stach@pengutronix.de>,
	Aisheng DONG <aisheng.dong@nxp.com>,
	Stephen Boyd <sboyd@kernel.org>
Cc: Michael Turquette <mturquette@baylibre.com>,
	Rob Herring <robh@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	Shawn Guo <shawnguo@kernel.org>,
	Fabio Estevam <fabio.estevam@nxp.com>,
	dl-linux-imx <linux-imx@nxp.com>,
	"linux-clk@vger.kernel.org" <linux-clk@vger.kernel.org>,
	"devicetree@vger.kernel.org" <devicetree@vger.kernel.org>,
	"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
	"linux-arm-kernel@lists.infradead.org" 
	<linux-arm-kernel@lists.infradead.org>,
	Abel Vesa <abelvesa@linux.com>, Abel Vesa <abel.vesa@nxp.com>
Subject: [PATCH v14 3/5] clk: imx: Add SCCG PLL type
Date: Thu, 29 Nov 2018 09:28:35 +0000	[thread overview]
Message-ID: <1543483640-4585-4-git-send-email-abel.vesa@nxp.com> (raw)
In-Reply-To: <1543483640-4585-1-git-send-email-abel.vesa@nxp.com>

From: Lucas Stach <l.stach@pengutronix.de>

The SCCG is a new PLL type introduced on i.MX8.

The description of this SCCG clock can be found here:

https://www.nxp.com/docs/en/reference-manual/IMX8MDQLQRM.pdf#page=834

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 drivers/clk/imx/Makefile       |   3 +-
 drivers/clk/imx/clk-sccg-pll.c | 256 +++++++++++++++++++++++++++++++++++++++++
 drivers/clk/imx/clk.h          |   9 ++
 3 files changed, 267 insertions(+), 1 deletion(-)
 create mode 100644 drivers/clk/imx/clk-sccg-pll.c

diff --git a/drivers/clk/imx/Makefile b/drivers/clk/imx/Makefile
index 4893c1f..b87513c 100644
--- a/drivers/clk/imx/Makefile
+++ b/drivers/clk/imx/Makefile
@@ -12,7 +12,8 @@ obj-y += \
 	clk-pllv1.o \
 	clk-pllv2.o \
 	clk-pllv3.o \
-	clk-pfd.o
+	clk-pfd.o \
+	clk-sccg-pll.o
 
 obj-$(CONFIG_SOC_IMX1)   += clk-imx1.o
 obj-$(CONFIG_SOC_IMX21)  += clk-imx21.o
diff --git a/drivers/clk/imx/clk-sccg-pll.c b/drivers/clk/imx/clk-sccg-pll.c
new file mode 100644
index 0000000..ee7752b
--- /dev/null
+++ b/drivers/clk/imx/clk-sccg-pll.c
@@ -0,0 +1,256 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2018 NXP.
+ *
+ * This driver supports the SCCG plls found in the imx8m SOCs
+ *
+ * Documentation for this SCCG pll can be found at:
+ *   https://www.nxp.com/docs/en/reference-manual/IMX8MDQLQRM.pdf#page=834
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/err.h>
+#include <linux/iopoll.h>
+#include <linux/slab.h>
+#include <linux/bitfield.h>
+
+#include "clk.h"
+
+/* PLL CFGs */
+#define PLL_CFG0		0x0
+#define PLL_CFG1		0x4
+#define PLL_CFG2		0x8
+
+#define PLL_DIVF1_MASK		GENMASK(18, 13)
+#define PLL_DIVF2_MASK		GENMASK(12, 7)
+#define PLL_DIVR1_MASK		GENMASK(27, 25)
+#define PLL_DIVR2_MASK		GENMASK(24, 19)
+#define PLL_REF_MASK		GENMASK(2, 0)
+
+#define PLL_LOCK_MASK		BIT(31)
+#define PLL_PD_MASK		BIT(7)
+
+#define OSC_25M			25000000
+#define OSC_27M			27000000
+
+#define PLL_SCCG_LOCK_TIMEOUT	70
+
+struct clk_sccg_pll {
+	struct clk_hw	hw;
+	void __iomem	*base;
+};
+
+#define to_clk_sccg_pll(_hw) container_of(_hw, struct clk_sccg_pll, hw)
+
+static int clk_pll_wait_lock(struct clk_sccg_pll *pll)
+{
+	u32 val;
+
+	return readl_poll_timeout(pll->base, val, val & PLL_LOCK_MASK, 0,
+					PLL_SCCG_LOCK_TIMEOUT);
+}
+
+static int clk_pll1_is_prepared(struct clk_hw *hw)
+{
+	struct clk_sccg_pll *pll = to_clk_sccg_pll(hw);
+	u32 val;
+
+	val = readl_relaxed(pll->base + PLL_CFG0);
+	return (val & PLL_PD_MASK) ? 0 : 1;
+}
+
+static unsigned long clk_pll1_recalc_rate(struct clk_hw *hw,
+					 unsigned long parent_rate)
+{
+	struct clk_sccg_pll *pll = to_clk_sccg_pll(hw);
+	u32 val, divf;
+
+	val = readl_relaxed(pll->base + PLL_CFG2);
+	divf = FIELD_GET(PLL_DIVF1_MASK, val);
+
+	return parent_rate * 2 * (divf + 1);
+}
+
+static long clk_pll1_round_rate(struct clk_hw *hw, unsigned long rate,
+			       unsigned long *prate)
+{
+	unsigned long parent_rate = *prate;
+	u32 div;
+
+	if (!parent_rate)
+		return 0;
+
+	div = rate / (parent_rate * 2);
+
+	return parent_rate * div * 2;
+}
+
+static int clk_pll1_set_rate(struct clk_hw *hw, unsigned long rate,
+			    unsigned long parent_rate)
+{
+	struct clk_sccg_pll *pll = to_clk_sccg_pll(hw);
+	u32 val;
+	u32 divf;
+
+	if (!parent_rate)
+		return -EINVAL;
+
+	divf = rate / (parent_rate * 2);
+
+	val = readl_relaxed(pll->base + PLL_CFG2);
+	val &= ~PLL_DIVF1_MASK;
+	val |= FIELD_PREP(PLL_DIVF1_MASK, divf - 1);
+	writel_relaxed(val, pll->base + PLL_CFG2);
+
+	return clk_pll_wait_lock(pll);
+}
+
+static int clk_pll1_prepare(struct clk_hw *hw)
+{
+	struct clk_sccg_pll *pll = to_clk_sccg_pll(hw);
+	u32 val;
+
+	val = readl_relaxed(pll->base + PLL_CFG0);
+	val &= ~PLL_PD_MASK;
+	writel_relaxed(val, pll->base + PLL_CFG0);
+
+	return clk_pll_wait_lock(pll);
+}
+
+static void clk_pll1_unprepare(struct clk_hw *hw)
+{
+	struct clk_sccg_pll *pll = to_clk_sccg_pll(hw);
+	u32 val;
+
+	val = readl_relaxed(pll->base + PLL_CFG0);
+	val |= PLL_PD_MASK;
+	writel_relaxed(val, pll->base + PLL_CFG0);
+
+}
+
+static unsigned long clk_pll2_recalc_rate(struct clk_hw *hw,
+					 unsigned long parent_rate)
+{
+	struct clk_sccg_pll *pll = to_clk_sccg_pll(hw);
+	u32 val, ref, divr1, divf1, divr2, divf2;
+	u64 temp64;
+
+	val = readl_relaxed(pll->base + PLL_CFG0);
+	switch (FIELD_GET(PLL_REF_MASK, val)) {
+	case 0:
+		ref = OSC_25M;
+		break;
+	case 1:
+		ref = OSC_27M;
+		break;
+	default:
+		ref = OSC_25M;
+		break;
+	}
+
+	val = readl_relaxed(pll->base + PLL_CFG2);
+	divr1 = FIELD_GET(PLL_DIVR1_MASK, val);
+	divr2 = FIELD_GET(PLL_DIVR2_MASK, val);
+	divf1 = FIELD_GET(PLL_DIVF1_MASK, val);
+	divf2 = FIELD_GET(PLL_DIVF2_MASK, val);
+
+	temp64 = ref * 2;
+	temp64 *= (divf1 + 1) * (divf2 + 1);
+
+	do_div(temp64, (divr1 + 1) * (divr2 + 1));
+
+	return temp64;
+}
+
+static long clk_pll2_round_rate(struct clk_hw *hw, unsigned long rate,
+			       unsigned long *prate)
+{
+	u32 div;
+	unsigned long parent_rate = *prate;
+
+	if (!parent_rate)
+		return 0;
+
+	div = rate / parent_rate;
+
+	return parent_rate * div;
+}
+
+static int clk_pll2_set_rate(struct clk_hw *hw, unsigned long rate,
+			    unsigned long parent_rate)
+{
+	u32 val;
+	u32 divf;
+	struct clk_sccg_pll *pll = to_clk_sccg_pll(hw);
+
+	if (!parent_rate)
+		return -EINVAL;
+
+	divf = rate / parent_rate;
+
+	val = readl_relaxed(pll->base + PLL_CFG2);
+	val &= ~PLL_DIVF2_MASK;
+	val |= FIELD_PREP(PLL_DIVF2_MASK, divf - 1);
+	writel_relaxed(val, pll->base + PLL_CFG2);
+
+	return clk_pll_wait_lock(pll);
+}
+
+static const struct clk_ops clk_sccg_pll1_ops = {
+	.is_prepared	= clk_pll1_is_prepared,
+	.recalc_rate	= clk_pll1_recalc_rate,
+	.round_rate	= clk_pll1_round_rate,
+	.set_rate	= clk_pll1_set_rate,
+};
+
+static const struct clk_ops clk_sccg_pll2_ops = {
+	.prepare	= clk_pll1_prepare,
+	.unprepare	= clk_pll1_unprepare,
+	.recalc_rate	= clk_pll2_recalc_rate,
+	.round_rate	= clk_pll2_round_rate,
+	.set_rate	= clk_pll2_set_rate,
+};
+
+struct clk *imx_clk_sccg_pll(const char *name,
+				const char *parent_name,
+				void __iomem *base,
+				enum imx_sccg_pll_type pll_type)
+{
+	struct clk_sccg_pll *pll;
+	struct clk_init_data init;
+	struct clk_hw *hw;
+	int ret;
+
+	switch (pll_type) {
+	case SCCG_PLL1:
+		init.ops = &clk_sccg_pll1_ops;
+		break;
+	case SCCG_PLL2:
+		init.ops = &clk_sccg_pll2_ops;
+		break;
+	default:
+		return ERR_PTR(-EINVAL);
+	}
+
+	pll = kzalloc(sizeof(*pll), GFP_KERNEL);
+	if (!pll)
+		return ERR_PTR(-ENOMEM);
+
+	init.name = name;
+	init.flags = 0;
+	init.parent_names = &parent_name;
+	init.num_parents = 1;
+
+	pll->base = base;
+	pll->hw.init = &init;
+
+	hw = &pll->hw;
+
+	ret = clk_hw_register(NULL, hw);
+	if (ret) {
+		kfree(pll);
+		return ERR_PTR(ret);
+	}
+
+	return hw->clk;
+}
diff --git a/drivers/clk/imx/clk.h b/drivers/clk/imx/clk.h
index 44a1f14..864cd8a 100644
--- a/drivers/clk/imx/clk.h
+++ b/drivers/clk/imx/clk.h
@@ -21,6 +21,11 @@ enum imx_pllv1_type {
 	IMX_PLLV1_IMX35,
 };
 
+enum imx_sccg_pll_type {
+	SCCG_PLL1,
+	SCCG_PLL2,
+};
+
 struct clk *imx_clk_pllv1(enum imx_pllv1_type type, const char *name,
 		const char *parent, void __iomem *base);
 
@@ -30,6 +35,10 @@ struct clk *imx_clk_pllv2(const char *name, const char *parent,
 struct clk *imx_clk_frac_pll(const char *name, const char *parent_name,
 			     void __iomem *base);
 
+struct clk *imx_clk_sccg_pll(const char *name, const char *parent_name,
+			     void __iomem *base,
+			     enum imx_sccg_pll_type pll_type);
+
 enum imx_pllv3_type {
 	IMX_PLLV3_GENERIC,
 	IMX_PLLV3_SYS,
-- 
2.7.4


  parent reply	other threads:[~2018-11-29  9:29 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-11-29  9:28 [PATCH v14 0/5] Add i.MX8MQ clock driver Abel Vesa
2018-11-29  9:28 ` [PATCH v14 1/5] dt-bindings: Add binding for i.MX8MQ CCM Abel Vesa
2018-11-29  9:28 ` [PATCH v14 2/5] clk: imx: Add fractional PLL output clock Abel Vesa
2018-11-29  9:28 ` Abel Vesa [this message]
2018-11-29  9:28 ` [PATCH v14 4/5] clk: imx: Add imx composite clock Abel Vesa
2018-11-29  9:28 ` [PATCH v14 5/5] clk: imx: Add clock driver for i.MX8MQ CCM Abel Vesa

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1543483640-4585-4-git-send-email-abel.vesa@nxp.com \
    --to=abel.vesa@nxp.com \
    --cc=abelvesa@linux.com \
    --cc=aisheng.dong@nxp.com \
    --cc=devicetree@vger.kernel.org \
    --cc=fabio.estevam@nxp.com \
    --cc=kernel@pengutronix.de \
    --cc=l.stach@pengutronix.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-imx@nxp.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=mturquette@baylibre.com \
    --cc=robh@kernel.org \
    --cc=sboyd@kernel.org \
    --cc=shawnguo@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).