linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Jordan Crouse <jcrouse@codeaurora.org>
To: georgi.djakov@linaro.org
Cc: linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-arm-msm@vger.kernel.org, dri-devel@lists.freedesktop.org,
	freedreno@lists.freedesktop.org
Subject: [PATCH 1/1] drm/msm/a6xx: Add support for an interconnect path
Date: Thu, 29 Nov 2018 10:21:24 -0700	[thread overview]
Message-ID: <20181129172124.6851-2-jcrouse@codeaurora.org> (raw)
In-Reply-To: <20181129172124.6851-1-jcrouse@codeaurora.org>

Try to get the interconnect path for the GPU and vote for the maximum
bandwidth to support all frequencies. This is needed for performance.
Later we will want to scale the bandwidth based on the frequency to
also optimize for power but that will require some device tree
infrastructure that does not yet exist.

v2: Absolute bandwidth values should be in KBps

Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
---
 drivers/gpu/drm/msm/adreno/a6xx_gmu.c   | 20 ++++++++++++++++++++
 drivers/gpu/drm/msm/adreno/adreno_gpu.c |  9 +++++++++
 drivers/gpu/drm/msm/msm_gpu.h           |  3 +++
 3 files changed, 32 insertions(+)

diff --git a/drivers/gpu/drm/msm/adreno/a6xx_gmu.c b/drivers/gpu/drm/msm/adreno/a6xx_gmu.c
index 546599a7ab05..b96ae2ab04bb 100644
--- a/drivers/gpu/drm/msm/adreno/a6xx_gmu.c
+++ b/drivers/gpu/drm/msm/adreno/a6xx_gmu.c
@@ -3,6 +3,7 @@
 
 #include <linux/clk.h>
 #include <linux/pm_opp.h>
+#include <linux/interconnect.h>
 #include <soc/qcom/cmd-db.h>
 
 #include "a6xx_gpu.h"
@@ -63,6 +64,9 @@ static bool a6xx_gmu_gx_is_on(struct a6xx_gmu *gmu)
 
 static void __a6xx_gmu_set_freq(struct a6xx_gmu *gmu, int index)
 {
+	struct a6xx_gpu *a6xx_gpu = container_of(gmu, struct a6xx_gpu, gmu);
+	struct adreno_gpu *adreno_gpu = &a6xx_gpu->base;
+	struct msm_gpu *gpu = &adreno_gpu->base;
 	int ret;
 
 	gmu_write(gmu, REG_A6XX_GMU_DCVS_ACK_OPTION, 0);
@@ -85,6 +89,12 @@ static void __a6xx_gmu_set_freq(struct a6xx_gmu *gmu, int index)
 		dev_err(gmu->dev, "GMU set GPU frequency error: %d\n", ret);
 
 	gmu->freq = gmu->gpu_freqs[index];
+
+	/*
+	 * Eventually we will want to scale the path vote with the frequency but
+	 * for now leave it t at max so that the performance is nominal.
+	 */
+	icc_set(gpu->icc_path, 0, 7216000000);
 }
 
 void a6xx_gmu_set_freq(struct msm_gpu *gpu, unsigned long freq)
@@ -680,6 +690,8 @@ int a6xx_gmu_reset(struct a6xx_gpu *a6xx_gpu)
 
 int a6xx_gmu_resume(struct a6xx_gpu *a6xx_gpu)
 {
+	struct adreno_gpu *adreno_gpu = &a6xx_gpu->base;
+	struct msm_gpu *gpu = &adreno_gpu->base;
 	struct a6xx_gmu *gmu = &a6xx_gpu->gmu;
 	int status, ret;
 
@@ -695,6 +707,9 @@ int a6xx_gmu_resume(struct a6xx_gpu *a6xx_gpu)
 	if (ret)
 		goto out;
 
+	/* Set the bus quota to a reasonable value for boot */
+	icc_set(gpu->icc_path, 0, 3072000000);
+
 	a6xx_gmu_irq_enable(gmu);
 
 	/* Check to see if we are doing a cold or warm boot */
@@ -735,6 +750,8 @@ bool a6xx_gmu_isidle(struct a6xx_gmu *gmu)
 
 int a6xx_gmu_stop(struct a6xx_gpu *a6xx_gpu)
 {
+	struct adreno_gpu *adreno_gpu = &a6xx_gpu->base;
+	struct msm_gpu *gpu = &adreno_gpu->base;
 	struct a6xx_gmu *gmu = &a6xx_gpu->gmu;
 	u32 val;
 
@@ -781,6 +798,9 @@ int a6xx_gmu_stop(struct a6xx_gpu *a6xx_gpu)
 	/* Tell RPMh to power off the GPU */
 	a6xx_rpmh_stop(gmu);
 
+	/* Remove the bus vote */
+	icc_set(gpu->icc_path, 0, 0);
+
 	clk_bulk_disable_unprepare(gmu->nr_clocks, gmu->clocks);
 
 	pm_runtime_put_sync(gmu->dev);
diff --git a/drivers/gpu/drm/msm/adreno/adreno_gpu.c b/drivers/gpu/drm/msm/adreno/adreno_gpu.c
index 93d70f4a2154..9bab491912cf 100644
--- a/drivers/gpu/drm/msm/adreno/adreno_gpu.c
+++ b/drivers/gpu/drm/msm/adreno/adreno_gpu.c
@@ -21,6 +21,7 @@
 #include <linux/kernel.h>
 #include <linux/pm_opp.h>
 #include <linux/slab.h>
+#include <linux/interconnect.h>
 #include "adreno_gpu.h"
 #include "msm_gem.h"
 #include "msm_mmu.h"
@@ -695,6 +696,11 @@ static int adreno_get_pwrlevels(struct device *dev,
 
 	DBG("fast_rate=%u, slow_rate=27000000", gpu->fast_rate);
 
+	/* Check for an interconnect path for the bus */
+	gpu->icc_path = of_icc_get(dev, "port0");
+	if (IS_ERR(gpu->icc_path))
+		gpu->icc_path = NULL;
+
 	return 0;
 }
 
@@ -733,10 +739,13 @@ int adreno_gpu_init(struct drm_device *drm, struct platform_device *pdev,
 
 void adreno_gpu_cleanup(struct adreno_gpu *adreno_gpu)
 {
+	struct msm_gpu *gpu = &adreno_gpu->base;
 	unsigned int i;
 
 	for (i = 0; i < ARRAY_SIZE(adreno_gpu->info->fw); i++)
 		release_firmware(adreno_gpu->fw[i]);
 
+	icc_put(gpu->icc_path);
+
 	msm_gpu_cleanup(&adreno_gpu->base);
 }
diff --git a/drivers/gpu/drm/msm/msm_gpu.h b/drivers/gpu/drm/msm/msm_gpu.h
index f82bac086666..7b04d1665555 100644
--- a/drivers/gpu/drm/msm/msm_gpu.h
+++ b/drivers/gpu/drm/msm/msm_gpu.h
@@ -20,6 +20,7 @@
 
 #include <linux/clk.h>
 #include <linux/regulator/consumer.h>
+#include <linux/interconnect.h>
 
 #include "msm_drv.h"
 #include "msm_fence.h"
@@ -119,6 +120,8 @@ struct msm_gpu {
 	struct clk *ebi1_clk, *core_clk, *rbbmtimer_clk;
 	uint32_t fast_rate;
 
+	struct icc_path *icc_path;
+
 	/* Hang and Inactivity Detection:
 	 */
 #define DRM_MSM_INACTIVE_PERIOD   66 /* in ms (roughly four frames) */
-- 
2.18.0


  reply	other threads:[~2018-11-29 17:21 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-11-29 17:21 [PATCH v2 0/1] drm/msm/a6xx: Add interconnect support Jordan Crouse
2018-11-29 17:21 ` Jordan Crouse [this message]
  -- strict thread matches above, loose matches on Subject: below --
2018-11-29 17:26 [PATCH v3 " Jordan Crouse
2018-11-29 17:26 ` [PATCH 1/1] drm/msm/a6xx: Add support for an interconnect path Jordan Crouse
2018-12-05 16:51   ` Georgi Djakov
2018-11-28 18:29 [PATCH 0/1] drm/msm/a6xx: Add interconnect support Jordan Crouse
2018-11-28 18:29 ` [PATCH 1/1] drm/msm/a6xx: Add support for an interconnect path Jordan Crouse

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20181129172124.6851-2-jcrouse@codeaurora.org \
    --to=jcrouse@codeaurora.org \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=freedreno@lists.freedesktop.org \
    --cc=georgi.djakov@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).