linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Paul Gortmaker <paul.gortmaker@windriver.com>
To: Joerg Roedel <joro@8bytes.org>
Cc: <iommu@lists.linux-foundation.org>,
	<linux-kernel@vger.kernel.org>,
	Paul Gortmaker <paul.gortmaker@windriver.com>,
	Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Subject: [PATCH 5/9] iommu/ipmmu-vmsa: Make it explicitly non-modular
Date: Sat, 1 Dec 2018 14:19:13 -0500	[thread overview]
Message-ID: <1543691957-17608-6-git-send-email-paul.gortmaker@windriver.com> (raw)
In-Reply-To: <1543691957-17608-1-git-send-email-paul.gortmaker@windriver.com>

The Kconfig currently controlling compilation of this code is:

drivers/iommu/Kconfig:config IPMMU_VMSA
drivers/iommu/Kconfig:        bool "Renesas VMSA-compatible IPMMU"

...meaning that it currently is not being built as a module by anyone.

Lets remove the modular code that is essentially orphaned, so that
when reading the driver there is no doubt it is builtin-only.

Since module_init was not even used by this driver, the init ordering
remains unchanged with this commit.

We also delete the MODULE_LICENSE tag etc. since all that information
was (or is now) contained at the top of the file in the comments.

Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code.

Cc: Joerg Roedel <joro@8bytes.org>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: iommu@lists.linux-foundation.org
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
---
 drivers/iommu/ipmmu-vmsa.c | 18 +++---------------
 1 file changed, 3 insertions(+), 15 deletions(-)

diff --git a/drivers/iommu/ipmmu-vmsa.c b/drivers/iommu/ipmmu-vmsa.c
index 9e2655f1c1bf..e1276da38e0d 100644
--- a/drivers/iommu/ipmmu-vmsa.c
+++ b/drivers/iommu/ipmmu-vmsa.c
@@ -1,6 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0
 /*
- * IPMMU VMSA
+ * IOMMU API for Renesas VMSA-compatible IPMMU
+ * Author: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
  *
  * Copyright (C) 2014 Renesas Electronics Corporation
  */
@@ -11,10 +12,10 @@
 #include <linux/dma-mapping.h>
 #include <linux/err.h>
 #include <linux/export.h>
+#include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/io.h>
 #include <linux/iommu.h>
-#include <linux/module.h>
 #include <linux/of.h>
 #include <linux/of_device.h>
 #include <linux/of_iommu.h>
@@ -968,8 +969,6 @@ static const struct of_device_id ipmmu_of_ids[] = {
 	},
 };
 
-MODULE_DEVICE_TABLE(of, ipmmu_of_ids);
-
 static int ipmmu_probe(struct platform_device *pdev)
 {
 	struct ipmmu_vmsa_device *mmu;
@@ -1140,15 +1139,4 @@ static int __init ipmmu_init(void)
 	setup_done = true;
 	return 0;
 }
-
-static void __exit ipmmu_exit(void)
-{
-	return platform_driver_unregister(&ipmmu_driver);
-}
-
 subsys_initcall(ipmmu_init);
-module_exit(ipmmu_exit);
-
-MODULE_DESCRIPTION("IOMMU API for Renesas VMSA-compatible IPMMU");
-MODULE_AUTHOR("Laurent Pinchart <laurent.pinchart@ideasonboard.com>");
-MODULE_LICENSE("GPL v2");
-- 
2.7.4


  parent reply	other threads:[~2018-12-01 19:22 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-12-01 19:19 [PATCH v2 0/9] iommu: clean up/remove modular stuff from non-modules Paul Gortmaker
2018-12-01 19:19 ` [PATCH 1/9] iommu: audit and remove any unnecessary uses of module.h Paul Gortmaker
2018-12-01 19:19 ` [PATCH 2/9] iommu/rockchip: Make it explicitly non-modular Paul Gortmaker
2018-12-01 19:19 ` [PATCH 3/9] iommu/msm: " Paul Gortmaker
2018-12-01 19:19 ` [PATCH 4/9] iommu/mediatek: " Paul Gortmaker
2018-12-01 19:19 ` Paul Gortmaker [this message]
2018-12-01 19:19 ` [PATCH 6/9] iommu/qcom: " Paul Gortmaker
2018-12-01 19:19 ` [PATCH 7/9] iommu/tegra: " Paul Gortmaker
2018-12-01 19:19 ` [PATCH 8/9] iommu/arm-smmu: Make arm-smmu " Paul Gortmaker
2018-12-01 19:19 ` [PATCH 9/9] iommu/arm-smmu: Make arm-smmu-v3 " Paul Gortmaker
2018-12-03 13:32 ` [PATCH v2 0/9] iommu: clean up/remove modular stuff from non-modules Joerg Roedel

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1543691957-17608-6-git-send-email-paul.gortmaker@windriver.com \
    --to=paul.gortmaker@windriver.com \
    --cc=iommu@lists.linux-foundation.org \
    --cc=joro@8bytes.org \
    --cc=laurent.pinchart@ideasonboard.com \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).