From: Mike Rapoport <rppt@linux.ibm.com>
To: Andrew Morton <akpm@linux-foundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>,
Benjamin Herrenschmidt <benh@kernel.crashing.org>,
"David S. Miller" <davem@davemloft.net>,
Guan Xuetao <gxt@pku.edu.cn>, Greentime Hu <green.hu@gmail.com>,
Jonas Bonn <jonas@southpole.se>,
Michael Ellerman <mpe@ellerman.id.au>,
Michal Hocko <mhocko@suse.com>, Michal Simek <monstr@monstr.eu>,
Mark Salter <msalter@redhat.com>,
Paul Mackerras <paulus@samba.org>, Rich Felker <dalias@libc.org>,
Russell King <linux@armlinux.org.uk>,
Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>,
Stafford Horne <shorne@gmail.com>,
Vincent Chen <deanbo422@gmail.com>,
Yoshinori Sato <ysato@users.sourceforge.jp>,
linux-arm-kernel@lists.infradead.org,
linux-c6x-dev@linux-c6x.org, linux-kernel@vger.kernel.org,
linux-mm@kvack.org, linux-sh@vger.kernel.org,
linuxppc-dev@lists.ozlabs.org, openrisc@lists.librecores.org,
sparclinux@vger.kernel.org, Mike Rapoport <rppt@linux.ibm.com>
Subject: [PATCH v3 1/6] powerpc: prefer memblock APIs returning virtual address
Date: Sun, 9 Dec 2018 17:00:19 +0200 [thread overview]
Message-ID: <1544367624-15376-2-git-send-email-rppt@linux.ibm.com> (raw)
In-Reply-To: <1544367624-15376-1-git-send-email-rppt@linux.ibm.com>
There are a several places that allocate memory using memblock APIs that
return a physical address, convert the returned address to the virtual
address and frequently also memset(0) the allocated range.
Update these places to use memblock allocators already returning a virtual
address. Use memblock functions that clear the allocated memory instead of
calling memset(0) where appropriate.
The calls to memblock_alloc_base() that were not followed by memset(0) are
replaced with memblock_alloc_try_nid_raw(). Since the latter does not
panic() when the allocation fails, the appropriate panic() calls are added
to the call sites.
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
---
arch/powerpc/kernel/paca.c | 16 ++++++----------
arch/powerpc/kernel/setup_64.c | 24 ++++++++++--------------
arch/powerpc/mm/hash_utils_64.c | 6 +++---
arch/powerpc/mm/pgtable-book3e.c | 8 ++------
arch/powerpc/mm/pgtable-book3s64.c | 5 +----
arch/powerpc/mm/pgtable-radix.c | 25 +++++++------------------
arch/powerpc/platforms/pasemi/iommu.c | 5 +++--
arch/powerpc/platforms/pseries/setup.c | 18 ++++++++++++++----
arch/powerpc/sysdev/dart_iommu.c | 7 +++++--
9 files changed, 51 insertions(+), 63 deletions(-)
diff --git a/arch/powerpc/kernel/paca.c b/arch/powerpc/kernel/paca.c
index 913bfca..276d36d4 100644
--- a/arch/powerpc/kernel/paca.c
+++ b/arch/powerpc/kernel/paca.c
@@ -27,7 +27,7 @@
static void *__init alloc_paca_data(unsigned long size, unsigned long align,
unsigned long limit, int cpu)
{
- unsigned long pa;
+ void *ptr;
int nid;
/*
@@ -42,17 +42,15 @@ static void *__init alloc_paca_data(unsigned long size, unsigned long align,
nid = early_cpu_to_node(cpu);
}
- pa = memblock_alloc_base_nid(size, align, limit, nid, MEMBLOCK_NONE);
- if (!pa) {
- pa = memblock_alloc_base(size, align, limit);
- if (!pa)
- panic("cannot allocate paca data");
- }
+ ptr = memblock_alloc_try_nid(size, align, MEMBLOCK_LOW_LIMIT,
+ limit, nid);
+ if (!ptr)
+ panic("cannot allocate paca data");
if (cpu == boot_cpuid)
memblock_set_bottom_up(false);
- return __va(pa);
+ return ptr;
}
#ifdef CONFIG_PPC_PSERIES
@@ -118,7 +116,6 @@ static struct slb_shadow * __init new_slb_shadow(int cpu, unsigned long limit)
}
s = alloc_paca_data(sizeof(*s), L1_CACHE_BYTES, limit, cpu);
- memset(s, 0, sizeof(*s));
s->persistent = cpu_to_be32(SLB_NUM_BOLTED);
s->buffer_length = cpu_to_be32(sizeof(*s));
@@ -222,7 +219,6 @@ void __init allocate_paca(int cpu)
paca = alloc_paca_data(sizeof(struct paca_struct), L1_CACHE_BYTES,
limit, cpu);
paca_ptrs[cpu] = paca;
- memset(paca, 0, sizeof(struct paca_struct));
initialise_paca(paca, cpu);
#ifdef CONFIG_PPC_PSERIES
diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c
index 236c115..3dcd779 100644
--- a/arch/powerpc/kernel/setup_64.c
+++ b/arch/powerpc/kernel/setup_64.c
@@ -634,19 +634,17 @@ __init u64 ppc64_bolted_size(void)
static void *__init alloc_stack(unsigned long limit, int cpu)
{
- unsigned long pa;
+ void *ptr;
BUILD_BUG_ON(STACK_INT_FRAME_SIZE % 16);
- pa = memblock_alloc_base_nid(THREAD_SIZE, THREAD_SIZE, limit,
- early_cpu_to_node(cpu), MEMBLOCK_NONE);
- if (!pa) {
- pa = memblock_alloc_base(THREAD_SIZE, THREAD_SIZE, limit);
- if (!pa)
- panic("cannot allocate stacks");
- }
+ ptr = memblock_alloc_try_nid(THREAD_SIZE, THREAD_SIZE,
+ MEMBLOCK_LOW_LIMIT, limit,
+ early_cpu_to_node(cpu));
+ if (!ptr)
+ panic("cannot allocate stacks");
- return __va(pa);
+ return ptr;
}
void __init irqstack_early_init(void)
@@ -739,20 +737,17 @@ void __init emergency_stack_init(void)
struct thread_info *ti;
ti = alloc_stack(limit, i);
- memset(ti, 0, THREAD_SIZE);
emerg_stack_init_thread_info(ti, i);
paca_ptrs[i]->emergency_sp = (void *)ti + THREAD_SIZE;
#ifdef CONFIG_PPC_BOOK3S_64
/* emergency stack for NMI exception handling. */
ti = alloc_stack(limit, i);
- memset(ti, 0, THREAD_SIZE);
emerg_stack_init_thread_info(ti, i);
paca_ptrs[i]->nmi_emergency_sp = (void *)ti + THREAD_SIZE;
/* emergency stack for machine check exception handling. */
ti = alloc_stack(limit, i);
- memset(ti, 0, THREAD_SIZE);
emerg_stack_init_thread_info(ti, i);
paca_ptrs[i]->mc_emergency_sp = (void *)ti + THREAD_SIZE;
#endif
@@ -933,8 +928,9 @@ static void __ref init_fallback_flush(void)
* hardware prefetch runoff. We don't have a recipe for load patterns to
* reliably avoid the prefetcher.
*/
- l1d_flush_fallback_area = __va(memblock_alloc_base(l1d_size * 2, l1d_size, limit));
- memset(l1d_flush_fallback_area, 0, l1d_size * 2);
+ l1d_flush_fallback_area = memblock_alloc_try_nid(l1d_size * 2,
+ l1d_size, MEMBLOCK_LOW_LIMIT,
+ limit, NUMA_NO_NODE);
for_each_possible_cpu(cpu) {
struct paca_struct *paca = paca_ptrs[cpu];
diff --git a/arch/powerpc/mm/hash_utils_64.c b/arch/powerpc/mm/hash_utils_64.c
index 0cc7fbc..bc6be44 100644
--- a/arch/powerpc/mm/hash_utils_64.c
+++ b/arch/powerpc/mm/hash_utils_64.c
@@ -908,9 +908,9 @@ static void __init htab_initialize(void)
#ifdef CONFIG_DEBUG_PAGEALLOC
if (debug_pagealloc_enabled()) {
linear_map_hash_count = memblock_end_of_DRAM() >> PAGE_SHIFT;
- linear_map_hash_slots = __va(memblock_alloc_base(
- linear_map_hash_count, 1, ppc64_rma_size));
- memset(linear_map_hash_slots, 0, linear_map_hash_count);
+ linear_map_hash_slots = memblock_alloc_try_nid(
+ linear_map_hash_count, 1, MEMBLOCK_LOW_LIMIT,
+ ppc64_rma_size, NUMA_NO_NODE);
}
#endif /* CONFIG_DEBUG_PAGEALLOC */
diff --git a/arch/powerpc/mm/pgtable-book3e.c b/arch/powerpc/mm/pgtable-book3e.c
index e0ccf36..53cbc7d 100644
--- a/arch/powerpc/mm/pgtable-book3e.c
+++ b/arch/powerpc/mm/pgtable-book3e.c
@@ -57,12 +57,8 @@ void vmemmap_remove_mapping(unsigned long start,
static __ref void *early_alloc_pgtable(unsigned long size)
{
- void *pt;
-
- pt = __va(memblock_alloc_base(size, size, __pa(MAX_DMA_ADDRESS)));
- memset(pt, 0, size);
-
- return pt;
+ return memblock_alloc_try_nid(size, size, MEMBLOCK_LOW_LIMIT,
+ __pa(MAX_DMA_ADDRESS), NUMA_NO_NODE);
}
/*
diff --git a/arch/powerpc/mm/pgtable-book3s64.c b/arch/powerpc/mm/pgtable-book3s64.c
index 9f93c9f..70d5478 100644
--- a/arch/powerpc/mm/pgtable-book3s64.c
+++ b/arch/powerpc/mm/pgtable-book3s64.c
@@ -195,11 +195,8 @@ void __init mmu_partition_table_init(void)
unsigned long ptcr;
BUILD_BUG_ON_MSG((PATB_SIZE_SHIFT > 36), "Partition table size too large.");
- partition_tb = __va(memblock_alloc_base(patb_size, patb_size,
- MEMBLOCK_ALLOC_ANYWHERE));
-
/* Initialize the Partition Table with no entries */
- memset((void *)partition_tb, 0, patb_size);
+ partition_tb = memblock_alloc(patb_size, patb_size);
/*
* update partition table control register,
diff --git a/arch/powerpc/mm/pgtable-radix.c b/arch/powerpc/mm/pgtable-radix.c
index 9311560..29bcea5 100644
--- a/arch/powerpc/mm/pgtable-radix.c
+++ b/arch/powerpc/mm/pgtable-radix.c
@@ -51,26 +51,15 @@ static int native_register_process_table(unsigned long base, unsigned long pg_sz
static __ref void *early_alloc_pgtable(unsigned long size, int nid,
unsigned long region_start, unsigned long region_end)
{
- unsigned long pa = 0;
- void *pt;
+ phys_addr_t min_addr = MEMBLOCK_LOW_LIMIT;
+ phys_addr_t max_addr = MEMBLOCK_ALLOC_ANYWHERE;
- if (region_start || region_end) /* has region hint */
- pa = memblock_alloc_range(size, size, region_start, region_end,
- MEMBLOCK_NONE);
- else if (nid != -1) /* has node hint */
- pa = memblock_alloc_base_nid(size, size,
- MEMBLOCK_ALLOC_ANYWHERE,
- nid, MEMBLOCK_NONE);
+ if (region_start)
+ min_addr = region_start;
+ if (region_end)
+ max_addr = region_end;
- if (!pa)
- pa = memblock_alloc_base(size, size, MEMBLOCK_ALLOC_ANYWHERE);
-
- BUG_ON(!pa);
-
- pt = __va(pa);
- memset(pt, 0, size);
-
- return pt;
+ return memblock_alloc_try_nid(size, size, min_addr, max_addr, nid);
}
static int early_map_kernel_page(unsigned long ea, unsigned long pa,
diff --git a/arch/powerpc/platforms/pasemi/iommu.c b/arch/powerpc/platforms/pasemi/iommu.c
index f297152..f62930f 100644
--- a/arch/powerpc/platforms/pasemi/iommu.c
+++ b/arch/powerpc/platforms/pasemi/iommu.c
@@ -208,7 +208,9 @@ static int __init iob_init(struct device_node *dn)
pr_debug(" -> %s\n", __func__);
/* For 2G space, 8x64 pages (2^21 bytes) is max total l2 size */
- iob_l2_base = (u32 *)__va(memblock_alloc_base(1UL<<21, 1UL<<21, 0x80000000));
+ iob_l2_base = memblock_alloc_try_nid_raw(1UL << 21, 1UL << 21,
+ MEMBLOCK_LOW_LIMIT, 0x80000000,
+ NUMA_NO_NODE);
pr_info("IOBMAP L2 allocated at: %p\n", iob_l2_base);
@@ -269,4 +271,3 @@ void __init iommu_init_early_pasemi(void)
pasemi_pci_controller_ops.dma_bus_setup = pci_dma_bus_setup_pasemi;
set_pci_dma_ops(&dma_iommu_ops);
}
-
diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c
index 0f553dc..1382360 100644
--- a/arch/powerpc/platforms/pseries/setup.c
+++ b/arch/powerpc/platforms/pseries/setup.c
@@ -130,8 +130,13 @@ static void __init fwnmi_init(void)
* It will be used in real mode mce handler, hence it needs to be
* below RMA.
*/
- mce_data_buf = __va(memblock_alloc_base(RTAS_ERROR_LOG_MAX * nr_cpus,
- RTAS_ERROR_LOG_MAX, ppc64_rma_size));
+ mce_data_buf = memblock_alloc_try_nid_raw(RTAS_ERROR_LOG_MAX * nr_cpus,
+ RTAS_ERROR_LOG_MAX, MEMBLOCK_LOW_LIMIT,
+ ppc64_rma_size, NUMA_NO_NODE);
+ if (!mce_data_buf)
+ panic("Failed to allocate %d bytes below %pa for MCE buffer\n",
+ RTAS_ERROR_LOG_MAX * nr_cpus, &ppc64_rma_size);
+
for_each_possible_cpu(i) {
paca_ptrs[i]->mce_data_buf = mce_data_buf +
(RTAS_ERROR_LOG_MAX * i);
@@ -140,8 +145,13 @@ static void __init fwnmi_init(void)
#ifdef CONFIG_PPC_BOOK3S_64
/* Allocate per cpu slb area to save old slb contents during MCE */
size = sizeof(struct slb_entry) * mmu_slb_size * nr_cpus;
- slb_ptr = __va(memblock_alloc_base(size, sizeof(struct slb_entry),
- ppc64_rma_size));
+ slb_ptr = memblock_alloc_try_nid_raw(size, sizeof(struct slb_entry),
+ MEMBLOCK_LOW_LIMIT, ppc64_rma_size,
+ NUMA_NO_NODE);
+ if (!slb_ptr)
+ panic("Failed to allocate %zu bytes below %pa for slb area\n",
+ size, &ppc64_rma_size);
+
for_each_possible_cpu(i)
paca_ptrs[i]->mce_faulty_slbs = slb_ptr + (mmu_slb_size * i);
#endif
diff --git a/arch/powerpc/sysdev/dart_iommu.c b/arch/powerpc/sysdev/dart_iommu.c
index a5b40d1..25bc25f 100644
--- a/arch/powerpc/sysdev/dart_iommu.c
+++ b/arch/powerpc/sysdev/dart_iommu.c
@@ -251,8 +251,11 @@ static void allocate_dart(void)
* 16MB (1 << 24) alignment. We allocate a full 16Mb chuck since we
* will blow up an entire large page anyway in the kernel mapping.
*/
- dart_tablebase = __va(memblock_alloc_base(1UL<<24,
- 1UL<<24, 0x80000000L));
+ dart_tablebase = memblock_alloc_try_nid_raw(SZ_16M, SZ_16M,
+ MEMBLOCK_LOW_LIMIT, SZ_2G,
+ NUMA_NO_NODE);
+ if (!dart_tablebase)
+ panic("Failed to allocate 16MB below 2GB for DART table\n");
/* There is no point scanning the DART space for leaks*/
kmemleak_no_scan((void *)dart_tablebase);
--
2.7.4
next prev parent reply other threads:[~2018-12-09 15:00 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-12-09 15:00 [PATCH v3 0/6] memblock: simplify several early memory allocation Mike Rapoport
2018-12-09 15:00 ` Mike Rapoport [this message]
2018-12-09 15:00 ` [PATCH v3 2/6] microblaze: prefer memblock API returning virtual address Mike Rapoport
2018-12-09 15:00 ` [PATCH v3 3/6] sh: prefer memblock APIs " Mike Rapoport
2018-12-09 15:00 ` [PATCH v3 4/6] openrisc: simplify pte_alloc_one_kernel() Mike Rapoport
2018-12-09 15:00 ` [PATCH v3 5/6] arch: simplify several early memory allocations Mike Rapoport
2018-12-09 15:00 ` [PATCH v3 6/6] arm, unicore32: remove early_alloc*() wrappers Mike Rapoport
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1544367624-15376-2-git-send-email-rppt@linux.ibm.com \
--to=rppt@linux.ibm.com \
--cc=akpm@linux-foundation.org \
--cc=arnd@arndb.de \
--cc=benh@kernel.crashing.org \
--cc=dalias@libc.org \
--cc=davem@davemloft.net \
--cc=deanbo422@gmail.com \
--cc=green.hu@gmail.com \
--cc=gxt@pku.edu.cn \
--cc=jonas@southpole.se \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-c6x-dev@linux-c6x.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=linux-sh@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=mhocko@suse.com \
--cc=monstr@monstr.eu \
--cc=mpe@ellerman.id.au \
--cc=msalter@redhat.com \
--cc=openrisc@lists.librecores.org \
--cc=paulus@samba.org \
--cc=shorne@gmail.com \
--cc=sparclinux@vger.kernel.org \
--cc=stefan.kristiansson@saunalahti.fi \
--cc=ysato@users.sourceforge.jp \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).