From: Long Cheng <long.cheng@mediatek.com>
To: Vinod Koul <vkoul@kernel.org>, Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>,
Dan Williams <dan.j.williams@intel.com>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Jiri Slaby <jslaby@suse.com>, Sean Wang <sean.wang@mediatek.com>,
Sean Wang <sean.wang@kernel.org>, <dmaengine@vger.kernel.org>,
<devicetree@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-mediatek@lists.infradead.org>,
<linux-kernel@vger.kernel.org>, <linux-serial@vger.kernel.org>,
<srv_heupstream@mediatek.com>,
Yingjoe Chen <yingjoe.chen@mediatek.com>,
YT Shen <yt.shen@mediatek.com>,
Long Cheng <long.cheng@mediatek.com>
Subject: [PATCH v4 2/2] arm: dts: mt2701: add uart APDMA to device tree
Date: Mon, 10 Dec 2018 10:57:16 +0800 [thread overview]
Message-ID: <1544410636-31815-3-git-send-email-long.cheng@mediatek.com> (raw)
In-Reply-To: <1544410636-31815-1-git-send-email-long.cheng@mediatek.com>
1. add uart APDMA controller device node
2. add uart 0/1/2/3/4/5 DMA function
Signed-off-by: Long Cheng <long.cheng@mediatek.com>
---
arch/arm64/boot/dts/mediatek/mt2712e.dtsi | 50 +++++++++++++++++++++++++++++
1 file changed, 50 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt2712e.dtsi b/arch/arm64/boot/dts/mediatek/mt2712e.dtsi
index 976d92a..a59728b 100644
--- a/arch/arm64/boot/dts/mediatek/mt2712e.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt2712e.dtsi
@@ -300,6 +300,9 @@
interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_LOW>;
clocks = <&baud_clk>, <&sys_clk>;
clock-names = "baud", "bus";
+ dmas = <&apdma 10
+ &apdma 11>;
+ dma-names = "tx", "rx";
status = "disabled";
};
@@ -378,6 +381,38 @@
status = "disabled";
};
+ apdma: dma-controller@11000400 {
+ compatible = "mediatek,mt2712-uart-dma",
+ "mediatek,mt6577-uart-dma";
+ reg = <0 0x11000400 0 0x80>,
+ <0 0x11000480 0 0x80>,
+ <0 0x11000500 0 0x80>,
+ <0 0x11000580 0 0x80>,
+ <0 0x11000600 0 0x80>,
+ <0 0x11000680 0 0x80>,
+ <0 0x11000700 0 0x80>,
+ <0 0x11000780 0 0x80>,
+ <0 0x11000800 0 0x80>,
+ <0 0x11000880 0 0x80>,
+ <0 0x11000900 0 0x80>,
+ <0 0x11000980 0 0x80>;
+ interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_SPI 104 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_SPI 105 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_SPI 106 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_SPI 107 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_SPI 108 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_SPI 109 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_SPI 110 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_SPI 111 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_SPI 112 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_SPI 113 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_SPI 114 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&pericfg CLK_PERI_AP_DMA>;
+ clock-names = "apdma";
+ #dma-cells = <1>;
+ };
+
uart0: serial@11002000 {
compatible = "mediatek,mt2712-uart",
"mediatek,mt6577-uart";
@@ -385,6 +420,9 @@
interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_LOW>;
clocks = <&baud_clk>, <&sys_clk>;
clock-names = "baud", "bus";
+ dmas = <&apdma 0
+ &apdma 1>;
+ dma-names = "tx", "rx";
status = "disabled";
};
@@ -395,6 +433,9 @@
interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_LOW>;
clocks = <&baud_clk>, <&sys_clk>;
clock-names = "baud", "bus";
+ dmas = <&apdma 2
+ &apdma 3>;
+ dma-names = "tx", "rx";
status = "disabled";
};
@@ -405,6 +446,9 @@
interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_LOW>;
clocks = <&baud_clk>, <&sys_clk>;
clock-names = "baud", "bus";
+ dmas = <&apdma 4
+ &apdma 5>;
+ dma-names = "tx", "rx";
status = "disabled";
};
@@ -415,6 +459,9 @@
interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_LOW>;
clocks = <&baud_clk>, <&sys_clk>;
clock-names = "baud", "bus";
+ dmas = <&apdma 6
+ &apdma 7>;
+ dma-names = "tx", "rx";
status = "disabled";
};
@@ -629,6 +676,9 @@
interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_LOW>;
clocks = <&baud_clk>, <&sys_clk>;
clock-names = "baud", "bus";
+ dmas = <&apdma 8
+ &apdma 9>;
+ dma-names = "tx", "rx";
status = "disabled";
};
--
1.7.9.5
prev parent reply other threads:[~2018-12-10 2:58 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-12-10 2:57 [PATCH v4 0/2] add uart DMA function Long Cheng
2018-12-10 2:57 ` [PATCH v4 1/2] dmaengine: 8250_mtk_dma: add Mediatek uart DMA support Long Cheng
2018-12-10 10:07 ` kbuild test robot
2018-12-10 2:57 ` Long Cheng [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1544410636-31815-3-git-send-email-long.cheng@mediatek.com \
--to=long.cheng@mediatek.com \
--cc=dan.j.williams@intel.com \
--cc=devicetree@vger.kernel.org \
--cc=dmaengine@vger.kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=jslaby@suse.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=linux-serial@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=matthias.bgg@gmail.com \
--cc=robh+dt@kernel.org \
--cc=sean.wang@kernel.org \
--cc=sean.wang@mediatek.com \
--cc=srv_heupstream@mediatek.com \
--cc=vkoul@kernel.org \
--cc=yingjoe.chen@mediatek.com \
--cc=yt.shen@mediatek.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).