From: Arnd Bergmann <arnd@arndb.de>
To: Andreas Koensgen <ajk@comnets.uni-bremen.de>,
"David S. Miller" <davem@davemloft.net>,
Paul Mackerras <paulus@samba.org>
Cc: Arnd Bergmann <arnd@arndb.de>, Al Viro <viro@zeniv.linux.org.uk>,
Colin Ian King <colin.king@canonical.com>,
linux-hams@vger.kernel.org, netdev@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-ppp@vger.kernel.org
Subject: [PATCH] hamradio, ppp: change semaphore to completion
Date: Mon, 10 Dec 2018 22:52:56 +0100 [thread overview]
Message-ID: <20181210215318.1982562-1-arnd@arndb.de> (raw)
ppp and hamradio have copies of the same code that uses a semaphore
in place of a completion for historic reasons. Make it use the
proper interface instead in all copies.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
drivers/net/hamradio/6pack.c | 10 +++++-----
drivers/net/hamradio/mkiss.c | 8 ++++----
drivers/net/ppp/ppp_async.c | 8 ++++----
3 files changed, 13 insertions(+), 13 deletions(-)
diff --git a/drivers/net/hamradio/6pack.c b/drivers/net/hamradio/6pack.c
index 17e6dcd2eb42..28c749980359 100644
--- a/drivers/net/hamradio/6pack.c
+++ b/drivers/net/hamradio/6pack.c
@@ -120,7 +120,7 @@ struct sixpack {
struct timer_list tx_t;
struct timer_list resync_t;
refcount_t refcnt;
- struct semaphore dead_sem;
+ struct completion dead;
spinlock_t lock;
};
@@ -389,7 +389,7 @@ static struct sixpack *sp_get(struct tty_struct *tty)
static void sp_put(struct sixpack *sp)
{
if (refcount_dec_and_test(&sp->refcnt))
- up(&sp->dead_sem);
+ complete(&sp->dead);
}
/*
@@ -576,7 +576,7 @@ static int sixpack_open(struct tty_struct *tty)
spin_lock_init(&sp->lock);
refcount_set(&sp->refcnt, 1);
- sema_init(&sp->dead_sem, 0);
+ init_completion(&sp->dead);
/* !!! length of the buffers. MTU is IP MTU, not PACLEN! */
@@ -670,10 +670,10 @@ static void sixpack_close(struct tty_struct *tty)
* we have to wait for all existing users to finish.
*/
if (!refcount_dec_and_test(&sp->refcnt))
- down(&sp->dead_sem);
+ wait_for_completion(&sp->dead);
/* We must stop the queue to avoid potentially scribbling
- * on the free buffers. The sp->dead_sem is not sufficient
+ * on the free buffers. The sp->dead completion is not sufficient
* to protect us from sp->xbuff access.
*/
netif_stop_queue(sp->dev);
diff --git a/drivers/net/hamradio/mkiss.c b/drivers/net/hamradio/mkiss.c
index 802233d41b25..4938cf4c184c 100644
--- a/drivers/net/hamradio/mkiss.c
+++ b/drivers/net/hamradio/mkiss.c
@@ -81,7 +81,7 @@ struct mkiss {
#define CRC_MODE_SMACK_TEST 4
atomic_t refcnt;
- struct semaphore dead_sem;
+ struct completion dead;
};
/*---------------------------------------------------------------------------*/
@@ -687,7 +687,7 @@ static struct mkiss *mkiss_get(struct tty_struct *tty)
static void mkiss_put(struct mkiss *ax)
{
if (atomic_dec_and_test(&ax->refcnt))
- up(&ax->dead_sem);
+ complete(&ax->dead);
}
static int crc_force = 0; /* Can be overridden with insmod */
@@ -715,7 +715,7 @@ static int mkiss_open(struct tty_struct *tty)
spin_lock_init(&ax->buflock);
atomic_set(&ax->refcnt, 1);
- sema_init(&ax->dead_sem, 0);
+ init_completion(&ax->dead);
ax->tty = tty;
tty->disc_data = ax;
@@ -795,7 +795,7 @@ static void mkiss_close(struct tty_struct *tty)
* we have to wait for all existing users to finish.
*/
if (!atomic_dec_and_test(&ax->refcnt))
- down(&ax->dead_sem);
+ wait_for_completion(&ax->dead);
/*
* Halt the transmit queue so that a new transmit cannot scribble
* on our buffers
diff --git a/drivers/net/ppp/ppp_async.c b/drivers/net/ppp/ppp_async.c
index bdc4d23627c5..288cf099876b 100644
--- a/drivers/net/ppp/ppp_async.c
+++ b/drivers/net/ppp/ppp_async.c
@@ -70,7 +70,7 @@ struct asyncppp {
struct tasklet_struct tsk;
refcount_t refcnt;
- struct semaphore dead_sem;
+ struct completion dead;
struct ppp_channel chan; /* interface to generic ppp layer */
unsigned char obuf[OBUFSIZE];
};
@@ -148,7 +148,7 @@ static struct asyncppp *ap_get(struct tty_struct *tty)
static void ap_put(struct asyncppp *ap)
{
if (refcount_dec_and_test(&ap->refcnt))
- up(&ap->dead_sem);
+ complete(&ap->dead);
}
/*
@@ -186,7 +186,7 @@ ppp_asynctty_open(struct tty_struct *tty)
tasklet_init(&ap->tsk, ppp_async_process, (unsigned long) ap);
refcount_set(&ap->refcnt, 1);
- sema_init(&ap->dead_sem, 0);
+ init_completion(&ap->dead);
ap->chan.private = ap;
ap->chan.ops = &async_ops;
@@ -235,7 +235,7 @@ ppp_asynctty_close(struct tty_struct *tty)
* by the time it returns.
*/
if (!refcount_dec_and_test(&ap->refcnt))
- down(&ap->dead_sem);
+ wait_for_completion(&ap->dead);
tasklet_kill(&ap->tsk);
ppp_unregister_channel(&ap->chan);
--
2.20.0
next reply other threads:[~2018-12-10 21:53 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-12-10 21:52 Arnd Bergmann [this message]
2018-12-14 21:27 ` [PATCH] hamradio, ppp: change semaphore to completion David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181210215318.1982562-1-arnd@arndb.de \
--to=arnd@arndb.de \
--cc=ajk@comnets.uni-bremen.de \
--cc=colin.king@canonical.com \
--cc=davem@davemloft.net \
--cc=linux-hams@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-ppp@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=paulus@samba.org \
--cc=viro@zeniv.linux.org.uk \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).