linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Ivan Mironov <mironov.ivan@gmail.com>
To: linux-scsi@vger.kernel.org, mironov.ivan@gmail.com
Cc: linux-kernel@vger.kernel.org, Don Brace <don.brace@microsemi.com>,
	"James E.J. Bottomley" <jejb@linux.vnet.ibm.com>,
	"Martin K. Petersen" <martin.petersen@oracle.com>,
	esc.storagedev@microsemi.com
Subject: [PATCH 4/6] scsi: hpsa: Ignore HBA flag from NVRAM if logical devices exist
Date: Fri, 14 Dec 2018 18:21:13 +0500	[thread overview]
Message-ID: <20181214132115.21440-5-mironov.ivan@gmail.com> (raw)
In-Reply-To: <20181214132115.21440-1-mironov.ivan@gmail.com>

Simultaneous use of physical devices and logical RAID devices may be
dangerous.

Signed-off-by: Ivan Mironov <mironov.ivan@gmail.com>
---
 drivers/scsi/hpsa.c | 14 +++++++++-----
 1 file changed, 9 insertions(+), 5 deletions(-)

diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c
index 60f1f7949d8d..0b5b3a651b70 100644
--- a/drivers/scsi/hpsa.c
+++ b/drivers/scsi/hpsa.c
@@ -4364,10 +4364,11 @@ static int hpsa_nvram_hba_flag_enabled(struct ctlr_info *h, bool *flag_enabled)
 	return rc;
 }
 
-static int hpsa_update_nvram_hba_mode(struct ctlr_info *h)
+static int hpsa_update_nvram_hba_mode(struct ctlr_info *h, u32 nlogicals)
 {
 	int rc;
 	bool flag_enabled;
+	bool ignore;
 
 	if (!hpsa_use_nvram_hba_flag)
 		return 0;
@@ -4378,10 +4379,13 @@ static int hpsa_update_nvram_hba_mode(struct ctlr_info *h)
 	if (rc)
 		return rc;
 
-	dev_info(&h->pdev->dev, "NVRAM HBA flag: %s\n",
-		flag_enabled ? "enabled" : "disabled");
+	ignore = flag_enabled && nlogicals;
 
-	h->nvram_hba_mode_enabled = flag_enabled;
+	dev_info(&h->pdev->dev, "NVRAM HBA flag: %s%s\n",
+		flag_enabled ? "enabled" : "disabled",
+		ignore ? " (ignored because of existing logical devices)" : "");
+
+	h->nvram_hba_mode_enabled = flag_enabled && !ignore;
 
 	return 0;
 }
@@ -4442,7 +4446,7 @@ static void hpsa_update_scsi_devices(struct ctlr_info *h)
 			__func__);
 	}
 
-	if (hpsa_update_nvram_hba_mode(h)) {
+	if (hpsa_update_nvram_hba_mode(h, nlogicals)) {
 		h->drv_req_rescan = 1;
 		goto out;
 	}
-- 
2.19.2


  parent reply	other threads:[~2018-12-14 13:22 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-12-14 13:21 [PATCH 0/6] Add support of the HBA mode on HP Smart Array P410i controllers Ivan Mironov
2018-12-14 13:21 ` [PATCH 1/6] scsi: hpsa: Add function to check if device is a disk or a zoned device Ivan Mironov
2018-12-14 13:26   ` Johannes Thumshirn
2018-12-14 13:21 ` [PATCH 2/6] scsi: hpsa: Support HBA mode on HP Smart Array P410i controllers Ivan Mironov
2018-12-14 13:21 ` [PATCH 3/6] scsi: hpsa: Add/mask existing devices on rescan if visibility changes Ivan Mironov
2018-12-14 13:21 ` Ivan Mironov [this message]
2018-12-14 13:21 ` [PATCH 5/6] scsi: hpsa: Name more fields in "struct bmic_identify_controller" Ivan Mironov
2018-12-14 13:21 ` [PATCH 6/6] scsi: hpsa: Do not use HBA flag from NVRAM if HBA is not supported Ivan Mironov
2018-12-14 19:38 ` [PATCH 0/6] Add support of the HBA mode on HP Smart Array P410i controllers Don.Brace
2018-12-14 20:30   ` Ivan Mironov
2018-12-17 16:32     ` Don.Brace

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20181214132115.21440-5-mironov.ivan@gmail.com \
    --to=mironov.ivan@gmail.com \
    --cc=don.brace@microsemi.com \
    --cc=esc.storagedev@microsemi.com \
    --cc=jejb@linux.vnet.ibm.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-scsi@vger.kernel.org \
    --cc=martin.petersen@oracle.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).