regulator: mcp16502: code cleanup
diff mbox series

Message ID 1545047086-30286-1-git-send-email-andrei.stefanescu@microchip.com
State Accepted
Commit 308144ce8e51bb6f9bed0ff0e72e7864f5f405f3
Headers show
Series
  • regulator: mcp16502: code cleanup
Related show

Commit Message

Andrei.Stefanescu@microchip.com Dec. 17, 2018, 11:44 a.m. UTC
This patch does the following:
- align parameter with parenthesis
- fix compile error

If CONFIG_SUSPEND is not set the dummy pm_ops
callbacks are named mcp16502_suspend and mcp16502_resume
instead of mcp16502_suspend_noirq and mcp16502_resume_noirq.

Excerpt from compile log (kbuild test robot):

In file included from include/linux/device.h:23:0,
from include/linux/gpio/driver.h:5,
from include/asm-generic/gpio.h:13,
from include/linux/gpio.h:62,
from drivers/regulator/mcp16502.c:11:

>> drivers/regulator/mcp16502.c:527:32: error: 'mcp16502_suspend_noirq'
undeclared here (not in a function); did you mean 'mcp16502_suspend'?
SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(mcp16502_suspend_noirq,

>> drivers/regulator/mcp16502.c:528:10: error: 'mcp16502_resume_noirq'
undeclared here (not in a function); did you mean 'mcp16502_suspend_noirq'?
mcp16502_resume_noirq)

vim +527 drivers/regulator/mcp16502.c

524
525	#ifdef CONFIG_PM
526	static const struct dev_pm_ops mcp16502_pm_ops = {
> 527		SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(mcp16502_suspend_noirq,
> 528					     mcp16502_resume_noirq)
529	};
530	#endif
531	static const struct i2c_device_id mcp16502_i2c_id[] = {
532		{ "mcp16502", 0 },
533		{ }
534	};
535	MODULE_DEVICE_TABLE(i2c, mcp16502_i2c_id);
536

Signed-off-by: Andrei Stefanescu <andrei.stefanescu@microchip.com>
---
 drivers/regulator/mcp16502.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

Comments

Mark Brown Dec. 19, 2018, 6:40 p.m. UTC | #1
On Mon, Dec 17, 2018 at 11:44:59AM +0000, Andrei.Stefanescu@microchip.com wrote:
> This patch does the following:
> - align parameter with parenthesis
> - fix compile error
> 
> If CONFIG_SUSPEND is not set the dummy pm_ops
> callbacks are named mcp16502_suspend and mcp16502_resume
> instead of mcp16502_suspend_noirq and mcp16502_resume_noirq.

Thanks for fixing this.

> 
> Excerpt from compile log (kbuild test robot):

There's no need to include the entire output from the kbuild robot in
your commit log, especially when it's much larger than either the change
or description of the change - it gets in the way of reading things as
it makes it harder to pick out relevant information.

Patch
diff mbox series

diff --git a/drivers/regulator/mcp16502.c b/drivers/regulator/mcp16502.c
index 25d7b43..809a664 100644
--- a/drivers/regulator/mcp16502.c
+++ b/drivers/regulator/mcp16502.c
@@ -518,14 +518,14 @@  static int mcp16502_resume_noirq(struct device *dev)
 	return 0;
 }
 #else /* !CONFIG_SUSPEND */
-#define mcp16502_suspend NULL
-#define mcp16502_resume NULL
+#define mcp16502_suspend_noirq NULL
+#define mcp16502_resume_noirq NULL
 #endif /* !CONFIG_SUSPEND */
 
 #ifdef CONFIG_PM
 static const struct dev_pm_ops mcp16502_pm_ops = {
 	SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(mcp16502_suspend_noirq,
-				     mcp16502_resume_noirq)
+				      mcp16502_resume_noirq)
 };
 #endif
 static const struct i2c_device_id mcp16502_i2c_id[] = {