From: Paolo Bonzini <pbonzini@redhat.com>
To: linux-kernel@vger.kernel.org, kvm@vger.kernel.org
Cc: mst@redhat.com
Subject: [PATCH] vhost: split structs into a separate header file
Date: Mon, 17 Dec 2018 18:35:09 +0100 [thread overview]
Message-ID: <20181217173509.8702-1-pbonzini@redhat.com> (raw)
vhost structs are shared by vhost-kernel and vhost-user. Split them
into a separate file to ease copying them into programs that implement
either the server or the client side of vhost-user.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
---
include/uapi/linux/vhost.h | 113 +--------------------------
include/uapi/linux/vhost_types.h | 128 +++++++++++++++++++++++++++++++
2 files changed, 130 insertions(+), 111 deletions(-)
create mode 100644 include/uapi/linux/vhost_types.h
diff --git a/include/uapi/linux/vhost.h b/include/uapi/linux/vhost.h
index 84c3de89696a..40d028eed645 100644
--- a/include/uapi/linux/vhost.h
+++ b/include/uapi/linux/vhost.h
@@ -11,94 +11,9 @@
* device configuration.
*/
+#include <linux/vhost_types.h>
#include <linux/types.h>
-#include <linux/compiler.h>
#include <linux/ioctl.h>
-#include <linux/virtio_config.h>
-#include <linux/virtio_ring.h>
-
-struct vhost_vring_state {
- unsigned int index;
- unsigned int num;
-};
-
-struct vhost_vring_file {
- unsigned int index;
- int fd; /* Pass -1 to unbind from file. */
-
-};
-
-struct vhost_vring_addr {
- unsigned int index;
- /* Option flags. */
- unsigned int flags;
- /* Flag values: */
- /* Whether log address is valid. If set enables logging. */
-#define VHOST_VRING_F_LOG 0
-
- /* Start of array of descriptors (virtually contiguous) */
- __u64 desc_user_addr;
- /* Used structure address. Must be 32 bit aligned */
- __u64 used_user_addr;
- /* Available structure address. Must be 16 bit aligned */
- __u64 avail_user_addr;
- /* Logging support. */
- /* Log writes to used structure, at offset calculated from specified
- * address. Address must be 32 bit aligned. */
- __u64 log_guest_addr;
-};
-
-/* no alignment requirement */
-struct vhost_iotlb_msg {
- __u64 iova;
- __u64 size;
- __u64 uaddr;
-#define VHOST_ACCESS_RO 0x1
-#define VHOST_ACCESS_WO 0x2
-#define VHOST_ACCESS_RW 0x3
- __u8 perm;
-#define VHOST_IOTLB_MISS 1
-#define VHOST_IOTLB_UPDATE 2
-#define VHOST_IOTLB_INVALIDATE 3
-#define VHOST_IOTLB_ACCESS_FAIL 4
- __u8 type;
-};
-
-#define VHOST_IOTLB_MSG 0x1
-#define VHOST_IOTLB_MSG_V2 0x2
-
-struct vhost_msg {
- int type;
- union {
- struct vhost_iotlb_msg iotlb;
- __u8 padding[64];
- };
-};
-
-struct vhost_msg_v2 {
- __u32 type;
- __u32 reserved;
- union {
- struct vhost_iotlb_msg iotlb;
- __u8 padding[64];
- };
-};
-
-struct vhost_memory_region {
- __u64 guest_phys_addr;
- __u64 memory_size; /* bytes */
- __u64 userspace_addr;
- __u64 flags_padding; /* No flags are currently specified. */
-};
-
-/* All region addresses and sizes must be 4K aligned. */
-#define VHOST_PAGE_SIZE 0x1000
-
-struct vhost_memory {
- __u32 nregions;
- __u32 padding;
- struct vhost_memory_region regions[0];
-};
/* ioctls */
@@ -186,31 +101,7 @@ struct vhost_memory {
* device. This can be used to stop the ring (e.g. for migration). */
#define VHOST_NET_SET_BACKEND _IOW(VHOST_VIRTIO, 0x30, struct vhost_vring_file)
-/* Feature bits */
-/* Log all write descriptors. Can be changed while device is active. */
-#define VHOST_F_LOG_ALL 26
-/* vhost-net should add virtio_net_hdr for RX, and strip for TX packets. */
-#define VHOST_NET_F_VIRTIO_NET_HDR 27
-
-/* VHOST_SCSI specific definitions */
-
-/*
- * Used by QEMU userspace to ensure a consistent vhost-scsi ABI.
- *
- * ABI Rev 0: July 2012 version starting point for v3.6-rc merge candidate +
- * RFC-v2 vhost-scsi userspace. Add GET_ABI_VERSION ioctl usage
- * ABI Rev 1: January 2013. Ignore vhost_tpgt filed in struct vhost_scsi_target.
- * All the targets under vhost_wwpn can be seen and used by guset.
- */
-
-#define VHOST_SCSI_ABI_VERSION 1
-
-struct vhost_scsi_target {
- int abi_version;
- char vhost_wwpn[224]; /* TRANSPORT_IQN_LEN */
- unsigned short vhost_tpgt;
- unsigned short reserved;
-};
+/* VHOST_SCSI specific defines */
#define VHOST_SCSI_SET_ENDPOINT _IOW(VHOST_VIRTIO, 0x40, struct vhost_scsi_target)
#define VHOST_SCSI_CLEAR_ENDPOINT _IOW(VHOST_VIRTIO, 0x41, struct vhost_scsi_target)
diff --git a/include/uapi/linux/vhost_types.h b/include/uapi/linux/vhost_types.h
new file mode 100644
index 000000000000..c907290ff065
--- /dev/null
+++ b/include/uapi/linux/vhost_types.h
@@ -0,0 +1,128 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+#ifndef _LINUX_VHOST_TYPES_H
+#define _LINUX_VHOST_TYPES_H
+/* Userspace interface for in-kernel virtio accelerators. */
+
+/* vhost is used to reduce the number of system calls involved in virtio.
+ *
+ * Existing virtio net code is used in the guest without modification.
+ *
+ * This header includes interface used by userspace hypervisor for
+ * device configuration.
+ */
+
+#include <linux/types.h>
+#include <linux/compiler.h>
+#include <linux/virtio_config.h>
+#include <linux/virtio_ring.h>
+
+struct vhost_vring_state {
+ unsigned int index;
+ unsigned int num;
+};
+
+struct vhost_vring_file {
+ unsigned int index;
+ int fd; /* Pass -1 to unbind from file. */
+
+};
+
+struct vhost_vring_addr {
+ unsigned int index;
+ /* Option flags. */
+ unsigned int flags;
+ /* Flag values: */
+ /* Whether log address is valid. If set enables logging. */
+#define VHOST_VRING_F_LOG 0
+
+ /* Start of array of descriptors (virtually contiguous) */
+ __u64 desc_user_addr;
+ /* Used structure address. Must be 32 bit aligned */
+ __u64 used_user_addr;
+ /* Available structure address. Must be 16 bit aligned */
+ __u64 avail_user_addr;
+ /* Logging support. */
+ /* Log writes to used structure, at offset calculated from specified
+ * address. Address must be 32 bit aligned. */
+ __u64 log_guest_addr;
+};
+
+/* no alignment requirement */
+struct vhost_iotlb_msg {
+ __u64 iova;
+ __u64 size;
+ __u64 uaddr;
+#define VHOST_ACCESS_RO 0x1
+#define VHOST_ACCESS_WO 0x2
+#define VHOST_ACCESS_RW 0x3
+ __u8 perm;
+#define VHOST_IOTLB_MISS 1
+#define VHOST_IOTLB_UPDATE 2
+#define VHOST_IOTLB_INVALIDATE 3
+#define VHOST_IOTLB_ACCESS_FAIL 4
+ __u8 type;
+};
+
+#define VHOST_IOTLB_MSG 0x1
+#define VHOST_IOTLB_MSG_V2 0x2
+
+struct vhost_msg {
+ int type;
+ union {
+ struct vhost_iotlb_msg iotlb;
+ __u8 padding[64];
+ };
+};
+
+struct vhost_msg_v2 {
+ __u32 type;
+ __u32 reserved;
+ union {
+ struct vhost_iotlb_msg iotlb;
+ __u8 padding[64];
+ };
+};
+
+struct vhost_memory_region {
+ __u64 guest_phys_addr;
+ __u64 memory_size; /* bytes */
+ __u64 userspace_addr;
+ __u64 flags_padding; /* No flags are currently specified. */
+};
+
+/* All region addresses and sizes must be 4K aligned. */
+#define VHOST_PAGE_SIZE 0x1000
+
+struct vhost_memory {
+ __u32 nregions;
+ __u32 padding;
+ struct vhost_memory_region regions[0];
+};
+
+/* VHOST_SCSI specific definitions */
+
+/*
+ * Used by QEMU userspace to ensure a consistent vhost-scsi ABI.
+ *
+ * ABI Rev 0: July 2012 version starting point for v3.6-rc merge candidate +
+ * RFC-v2 vhost-scsi userspace. Add GET_ABI_VERSION ioctl usage
+ * ABI Rev 1: January 2013. Ignore vhost_tpgt field in struct vhost_scsi_target.
+ * All the targets under vhost_wwpn can be seen and used by guset.
+ */
+
+#define VHOST_SCSI_ABI_VERSION 1
+
+struct vhost_scsi_target {
+ int abi_version;
+ char vhost_wwpn[224]; /* TRANSPORT_IQN_LEN */
+ unsigned short vhost_tpgt;
+ unsigned short reserved;
+};
+
+/* Feature bits */
+/* Log all write descriptors. Can be changed while device is active. */
+#define VHOST_F_LOG_ALL 26
+/* vhost-net should add virtio_net_hdr for RX, and strip for TX packets. */
+#define VHOST_NET_F_VIRTIO_NET_HDR 27
+
+#endif
--
2.20.1
reply other threads:[~2018-12-17 17:35 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181217173509.8702-1-pbonzini@redhat.com \
--to=pbonzini@redhat.com \
--cc=kvm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mst@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).