linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Wei Ni <wni@nvidia.com>
To: <thierry.reding@gmail.com>, <daniel.lezcano@linaro.org>,
	<edubezval@gmail.com>, <linux-tegra@vger.kernel.org>
Cc: <rui.zhang@intel.com>, <srikars@nvidia.com>,
	<linux-kernel@vger.kernel.org>, <devicetree@vger.kernel.org>,
	Wei Ni <wni@nvidia.com>
Subject: [PATCH v1 07/12] thermal: tegra: add support for thermal IRQ
Date: Tue, 18 Dec 2018 15:34:39 +0800	[thread overview]
Message-ID: <1545118484-23641-9-git-send-email-wni@nvidia.com> (raw)
In-Reply-To: <1545118484-23641-1-git-send-email-wni@nvidia.com>

Support to generate an interrupt when the temperature
crosses a programmed threshold and notify the thermal framework.

Signed-off-by: Wei Ni <wni@nvidia.com>
---
 drivers/thermal/tegra/soctherm.c | 136 +++++++++++++++++++++++++++++++++++++++
 1 file changed, 136 insertions(+)

diff --git a/drivers/thermal/tegra/soctherm.c b/drivers/thermal/tegra/soctherm.c
index d3cef88a3f22..c66fdd546ef0 100644
--- a/drivers/thermal/tegra/soctherm.c
+++ b/drivers/thermal/tegra/soctherm.c
@@ -86,6 +86,20 @@
 #define THERMCTL_LVL0_UP_STATS			0x10
 #define THERMCTL_LVL0_DN_STATS			0x14
 
+#define THERMCTL_INTR_STATUS			0x84
+#define THERMCTL_INTR_ENABLE			0x88
+#define THERMCTL_INTR_DISABLE			0x8c
+
+#define TH_INTR_MD0_MASK			BIT(25)
+#define TH_INTR_MU0_MASK			BIT(24)
+#define TH_INTR_GD0_MASK			BIT(17)
+#define TH_INTR_GU0_MASK			BIT(16)
+#define TH_INTR_CD0_MASK			BIT(9)
+#define TH_INTR_CU0_MASK			BIT(8)
+#define TH_INTR_PD0_MASK			BIT(1)
+#define TH_INTR_PU0_MASK			BIT(0)
+#define TH_INTR_IGNORE_MASK			0xFCFCFCFC
+
 #define THERMCTL_STATS_CTL			0x94
 #define STATS_CTL_CLR_DN			0x8
 #define STATS_CTL_EN_DN				0x4
@@ -242,6 +256,8 @@ struct tegra_soctherm {
 	void __iomem *clk_regs;
 	void __iomem *ccroc_regs;
 
+	int thermal_irq;
+
 	u32 *calib;
 	struct thermal_zone_device **thermctl_tzs;
 	struct tegra_soctherm_soc *soc;
@@ -640,6 +656,98 @@ static int tegra_soctherm_set_hwtrips(struct device *dev,
 	return 0;
 }
 
+static irqreturn_t soctherm_thermal_isr(int irq, void *dev_id)
+{
+	struct tegra_soctherm *ts = dev_id;
+	u32 r;
+
+	r = readl(ts->regs + THERMCTL_INTR_STATUS);
+	writel(r, ts->regs + THERMCTL_INTR_DISABLE);
+
+	return IRQ_WAKE_THREAD;
+}
+
+/**
+ * soctherm_thermal_isr_thread() - Handles a thermal interrupt request
+ * @irq:       The interrupt number being requested; not used
+ * @dev_id:    Opaque pointer to tegra_soctherm;
+ *
+ * Clears the interrupt status register if there are expected
+ * interrupt bits set.
+ * The interrupt(s) are then handled by updating the corresponding
+ * thermal zones.
+ *
+ * An error is logged if any unexpected interrupt bits are set.
+ *
+ * Disabled interrupts are re-enabled.
+ *
+ * Return: %IRQ_HANDLED. Interrupt was handled and no further processing
+ * is needed.
+ */
+static irqreturn_t soctherm_thermal_isr_thread(int irq, void *dev_id)
+{
+	struct tegra_soctherm *ts = dev_id;
+	struct thermal_zone_device *tz;
+	u32 st, ex = 0, cp = 0, gp = 0, pl = 0, me = 0;
+
+	st = readl(ts->regs + THERMCTL_INTR_STATUS);
+
+	/* deliberately clear expected interrupts handled in SW */
+	cp |= st & TH_INTR_CD0_MASK;
+	cp |= st & TH_INTR_CU0_MASK;
+
+	gp |= st & TH_INTR_GD0_MASK;
+	gp |= st & TH_INTR_GU0_MASK;
+
+	pl |= st & TH_INTR_PD0_MASK;
+	pl |= st & TH_INTR_PU0_MASK;
+
+	me |= st & TH_INTR_MD0_MASK;
+	me |= st & TH_INTR_MU0_MASK;
+
+	ex |= cp | gp | pl | me;
+	if (ex) {
+		writel(ex, ts->regs + THERMCTL_INTR_STATUS);
+		st &= ~ex;
+
+		if (cp) {
+			tz = ts->thermctl_tzs[TEGRA124_SOCTHERM_SENSOR_CPU];
+			thermal_zone_device_update(tz,
+						   THERMAL_EVENT_UNSPECIFIED);
+		}
+
+		if (gp) {
+			tz = ts->thermctl_tzs[TEGRA124_SOCTHERM_SENSOR_GPU];
+			thermal_zone_device_update(tz,
+						   THERMAL_EVENT_UNSPECIFIED);
+		}
+
+		if (pl) {
+			tz = ts->thermctl_tzs[TEGRA124_SOCTHERM_SENSOR_PLLX];
+			thermal_zone_device_update(tz,
+						   THERMAL_EVENT_UNSPECIFIED);
+		}
+
+		if (me) {
+			tz = ts->thermctl_tzs[TEGRA124_SOCTHERM_SENSOR_MEM];
+			thermal_zone_device_update(tz,
+						   THERMAL_EVENT_UNSPECIFIED);
+		}
+	}
+
+	/* deliberately ignore expected interrupts NOT handled in SW */
+	ex |= TH_INTR_IGNORE_MASK;
+	st &= ~ex;
+
+	if (st) {
+		/* Whine about any other unexpected INTR bits still set */
+		pr_err("soctherm: Ignored unexpected INTRs 0x%08x\n", st);
+		writel(st, ts->regs + THERMCTL_INTR_STATUS);
+	}
+
+	return IRQ_HANDLED;
+}
+
 #ifdef CONFIG_DEBUG_FS
 static int regs_show(struct seq_file *s, void *data)
 {
@@ -1312,6 +1420,32 @@ static void tegra_soctherm_throttle(struct device *dev)
 	writel(v, ts->regs + THERMCTL_STATS_CTL);
 }
 
+static int soctherm_interrupts_init(struct platform_device *pdev,
+				    struct tegra_soctherm *tegra)
+{
+	int ret;
+
+	tegra->thermal_irq = platform_get_irq(pdev, 0);
+	if (tegra->thermal_irq < 0) {
+		dev_dbg(&pdev->dev, "get 'thermal_irq' failed.\n");
+		return 0;
+	}
+
+	ret = devm_request_threaded_irq(&pdev->dev,
+					tegra->thermal_irq,
+					soctherm_thermal_isr,
+					soctherm_thermal_isr_thread,
+					IRQF_ONESHOT,
+					dev_name(&pdev->dev),
+					tegra);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "request_irq 'thermal_irq' failed.\n");
+		return ret;
+	}
+
+	return 0;
+}
+
 static void soctherm_init(struct platform_device *pdev)
 {
 	struct tegra_soctherm *tegra = platform_get_drvdata(pdev);
@@ -1505,6 +1639,8 @@ static int tegra_soctherm_probe(struct platform_device *pdev)
 			goto disable_clocks;
 	}
 
+	err = soctherm_interrupts_init(pdev, tegra);
+
 	soctherm_debug_init(pdev);
 
 	return 0;
-- 
2.7.4


  parent reply	other threads:[~2018-12-18  7:36 UTC|newest]

Thread overview: 26+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-12-18  7:34 [PATCH v1 00/12] Add some functionalities for Tegra soctherm Wei Ni
2018-12-18  7:34 ` Wei Ni
2019-01-21  9:26   ` Wei Ni
2018-12-18  7:34 ` [PATCH v1 01/12] of: Add bindings of thermtrip " Wei Ni
2018-12-27 23:06   ` Rob Herring
2018-12-28  3:28     ` Wei Ni
2019-02-20  1:22       ` Eduardo Valentin
2019-02-20  8:39         ` Wei Ni
2018-12-18  7:34 ` [PATCH v1 02/12] thermal: tegra: support hw and sw shutdown Wei Ni
2018-12-18  7:34 ` [PATCH v1 03/12] arm64: dts: tegra210: set thermtrip Wei Ni
2018-12-18  7:34 ` [PATCH v1 04/12] of: Add bindings of gpu hw throttle for Tegra soctherm Wei Ni
2019-02-18 20:29   ` Rob Herring
2019-02-19  6:08     ` Wei Ni
2019-02-18 20:33   ` Rob Herring
2019-02-19  6:34     ` Wei Ni
2018-12-18  7:34 ` [PATCH v1 05/12] thermal: tegra: add support for gpu hw-throttle Wei Ni
2018-12-18  7:34 ` [PATCH v1 06/12] arm64: dts: tegra210: set gpu hw throttle level Wei Ni
2018-12-18  7:34 ` Wei Ni [this message]
2018-12-18  7:34 ` [PATCH v1 08/12] thermal: tegra: add set_trips functionality Wei Ni
2018-12-18  7:34 ` [PATCH v1 09/12] thermal: tegra: add support for EDP IRQ Wei Ni
2018-12-18  7:34 ` [PATCH v1 10/12] arm64: dts: tegra210: set EDP interrupt line Wei Ni
2018-12-18  7:34 ` [PATCH v1 11/12] of: Add bindings of OC hw throttle for Tegra soctherm Wei Ni
2019-02-18 20:32   ` Rob Herring
2019-02-19  6:31     ` Wei Ni
2018-12-18  7:34 ` [PATCH v1 12/12] thermal: tegra: enable OC hw throttle Wei Ni
2018-12-18  7:50 ` [PATCH v1 00/12] Add some functionalities for Tegra soctherm Wei Ni

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1545118484-23641-9-git-send-email-wni@nvidia.com \
    --to=wni@nvidia.com \
    --cc=daniel.lezcano@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=edubezval@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-tegra@vger.kernel.org \
    --cc=rui.zhang@intel.com \
    --cc=srikars@nvidia.com \
    --cc=thierry.reding@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).