linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Richard Zhu <hongxing.zhu@nxp.com>
To: "bhelgaas@google.com" <bhelgaas@google.com>,
	"lorenzo.pieralisi@arm.com" <lorenzo.pieralisi@arm.com>,
	"l.stach@pengutronix.de" <l.stach@pengutronix.de>,
	"andrew.smirnov@gmail.com" <andrew.smirnov@gmail.com>
Cc: "linux-pci@vger.kernel.org" <linux-pci@vger.kernel.org>,
	"linux-arm-kernel@lists.infradead.org" 
	<linux-arm-kernel@lists.infradead.org>,
	"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
	Richard Zhu <hongxing.zhu@nxp.com>
Subject: [v5] PCI: imx: make msi work without CONFIG_PCIEPORTBUS=y
Date: Wed, 19 Dec 2018 04:45:04 +0000	[thread overview]
Message-ID: <1545193599-11604-1-git-send-email-hongxing.zhu@nxp.com> (raw)

Assertion of the MSI Enable bit of RC's MSI CAP is mandatory required to
trigger MSI on i.MX6 PCIe.
This bit would be asserted when CONFIG_PCIEPORTBUS=y.
Thus, the MSI works fine on i.MX6 PCIe before the commit "f3fdfc4".

Assert it unconditionally when MSI is enabled.
Otherwise, the MSI wouldn't be triggered although the EP is present and
the MSIs are assigned.

Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
---
Changes v1 -> v2:
* Assert the MSI_EN unconditionally when MSI is supported.
Changes v2 -> v3:
* Remove the IS_ENABLED(CONFIG_PCI_MSI) since the driver depends on
PCI_MSI_IRQ_DOMAIN
* Extended with a check for pci_msi_enabled() to see if the user
explicitly want legacy IRQs
Changes v3 -> v4:
* Refer to Bjorn's comments, refine the subject and commit log and change
the PCI_MSI_CAP to PCIE_RC_IMX6_MSI_CAP.
Changes v4 -> v5:
* Correct one spell mistake from PCIE_RC_MSI_IMX6_CAP to
PCIE_RC_IMX6_MSI_CAP.
---
 drivers/pci/controller/dwc/pci-imx6.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
index e563ca9..73542dd 100644
--- a/drivers/pci/controller/dwc/pci-imx6.c
+++ b/drivers/pci/controller/dwc/pci-imx6.c
@@ -82,6 +82,7 @@ struct imx6_pcie {
 #define PHY_PLL_LOCK_WAIT_USLEEP_MAX	200
 
 /* PCIe Root Complex registers (memory-mapped) */
+#define PCIE_RC_IMX6_MSI_CAP			0x50
 #define PCIE_RC_LCR				0x7c
 #define PCIE_RC_LCR_MAX_LINK_SPEEDS_GEN1	0x1
 #define PCIE_RC_LCR_MAX_LINK_SPEEDS_GEN2	0x2
@@ -999,6 +1000,7 @@ static int imx6_pcie_probe(struct platform_device *pdev)
 	struct resource *dbi_base;
 	struct device_node *node = dev->of_node;
 	int ret;
+	u16 val;
 
 	imx6_pcie = devm_kzalloc(dev, sizeof(*imx6_pcie), GFP_KERNEL);
 	if (!imx6_pcie)
@@ -1149,6 +1151,14 @@ static int imx6_pcie_probe(struct platform_device *pdev)
 	if (ret < 0)
 		return ret;
 
+	if (pci_msi_enabled()) {
+		val = dw_pcie_readw_dbi(pci, PCIE_RC_IMX6_MSI_CAP +
+				PCI_MSI_FLAGS);
+		val |= PCI_MSI_FLAGS_ENABLE;
+		dw_pcie_writew_dbi(pci, PCIE_RC_IMX6_MSI_CAP +
+				PCI_MSI_FLAGS, val);
+	}
+
 	return 0;
 }
 
-- 
2.7.4


             reply	other threads:[~2018-12-19  4:45 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-12-19  4:45 Richard Zhu [this message]
2018-12-19 15:07 ` [v5] PCI: imx: make msi work without CONFIG_PCIEPORTBUS=y Sven Van Asbroeck
2018-12-20 14:49 ` Lorenzo Pieralisi
2018-12-21  0:42   ` Richard Zhu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1545193599-11604-1-git-send-email-hongxing.zhu@nxp.com \
    --to=hongxing.zhu@nxp.com \
    --cc=andrew.smirnov@gmail.com \
    --cc=bhelgaas@google.com \
    --cc=l.stach@pengutronix.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=lorenzo.pieralisi@arm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).