linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Sebastian Reichel <sre@kernel.org>
To: Sebastian Reichel <sre@kernel.org>,
	Mauro Carvalho Chehab <mchehab@kernel.org>,
	Marcel Holtmann <marcel@holtmann.org>,
	Tony Lindgren <tony@atomide.com>
Cc: Rob Herring <robh@kernel.org>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Pavel Machek <pavel@ucw.cz>,
	linux-bluetooth@vger.kernel.org, linux-media@vger.kernel.org,
	linux-omap@vger.kernel.org, linux-kernel@vger.kernel.org,
	Sebastian Reichel <sebastian.reichel@collabora.com>
Subject: [PATCH 10/14] media: wl128x-radio: simplify fmc_prepare/fmc_release
Date: Fri, 21 Dec 2018 02:17:48 +0100	[thread overview]
Message-ID: <20181221011752.25627-11-sre@kernel.org> (raw)
In-Reply-To: <20181221011752.25627-1-sre@kernel.org>

From: Sebastian Reichel <sebastian.reichel@collabora.com>

Remove unused return code from fmc_prepare() and fmc_release() to
simplify the code a bit.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
 drivers/media/radio/wl128x/fmdrv_common.c | 26 +++++++++--------------
 drivers/media/radio/wl128x/fmdrv_common.h |  4 ++--
 drivers/media/radio/wl128x/fmdrv_v4l2.c   | 12 ++---------
 3 files changed, 14 insertions(+), 28 deletions(-)

diff --git a/drivers/media/radio/wl128x/fmdrv_common.c b/drivers/media/radio/wl128x/fmdrv_common.c
index d584ca970556..473ec5738a11 100644
--- a/drivers/media/radio/wl128x/fmdrv_common.c
+++ b/drivers/media/radio/wl128x/fmdrv_common.c
@@ -1225,7 +1225,8 @@ static int fm_power_down(struct fmdev *fmdev)
 	if (ret < 0)
 		return ret;
 
-	return fmc_release(fmdev);
+	fmc_release(fmdev);
+	return 0;
 }
 
 /* Reads init command from FM firmware file and loads to the chip */
@@ -1310,7 +1311,7 @@ static int fm_power_up(struct fmdev *fmdev, u8 mode)
 {
 	u16 payload;
 	__be16 asic_id, asic_ver;
-	int resp_len, ret;
+	int resp_len, ret = 0;
 	u8 fw_name[50];
 
 	if (mode >= FM_MODE_ENTRY_MAX) {
@@ -1322,11 +1323,7 @@ static int fm_power_up(struct fmdev *fmdev, u8 mode)
 	 * Initialize FM common module. FM GPIO toggling is
 	 * taken care in Shared Transport driver.
 	 */
-	ret = fmc_prepare(fmdev);
-	if (ret < 0) {
-		fmerr("Unable to prepare FM Common\n");
-		return ret;
-	}
+	fmc_prepare(fmdev);
 
 	payload = FM_ENABLE;
 	if (fmc_send_cmd(fmdev, FM_POWER_MODE, REG_WR, &payload,
@@ -1366,7 +1363,8 @@ static int fm_power_up(struct fmdev *fmdev, u8 mode)
 	} else
 		return ret;
 rel:
-	return fmc_release(fmdev);
+	fmc_release(fmdev);
+	return ret;
 }
 
 /* Set FM Modes(TX, RX, OFF) */
@@ -1479,14 +1477,13 @@ static void fm_st_reg_comp_cb(void *arg, int data)
  * This function will be called from FM V4L2 open function.
  * Register with ST driver and initialize driver data.
  */
-int fmc_prepare(struct fmdev *fmdev)
+void fmc_prepare(struct fmdev *fmdev)
 {
 	static struct st_proto_s fm_st_proto;
-	int ret;
 
 	if (test_bit(FM_CORE_READY, &fmdev->flag)) {
 		fmdbg("FM Core is already up\n");
-		return 0;
+		return;
 	}
 
 	memset(&fm_st_proto, 0, sizeof(fm_st_proto));
@@ -1571,22 +1568,20 @@ int fmc_prepare(struct fmdev *fmdev)
 
 	fm_rx_reset_station_info(fmdev);
 	set_bit(FM_CORE_READY, &fmdev->flag);
-
-	return ret;
 }
 
 /*
  * This function will be called from FM V4L2 release function.
  * Unregister from ST driver.
  */
-int fmc_release(struct fmdev *fmdev)
+void fmc_release(struct fmdev *fmdev)
 {
 	static struct st_proto_s fm_st_proto;
 	int ret;
 
 	if (!test_bit(FM_CORE_READY, &fmdev->flag)) {
 		fmdbg("FM Core is already down\n");
-		return 0;
+		return;
 	}
 	/* Service pending read */
 	wake_up_interruptible(&fmdev->rx.rds.read_queue);
@@ -1611,7 +1606,6 @@ int fmc_release(struct fmdev *fmdev)
 		fmdbg("Successfully unregistered from ST\n");
 
 	clear_bit(FM_CORE_READY, &fmdev->flag);
-	return ret;
 }
 
 static int wl128x_fm_probe(struct platform_device *pdev)
diff --git a/drivers/media/radio/wl128x/fmdrv_common.h b/drivers/media/radio/wl128x/fmdrv_common.h
index 552e22ea6bf3..47a8f0061eb0 100644
--- a/drivers/media/radio/wl128x/fmdrv_common.h
+++ b/drivers/media/radio/wl128x/fmdrv_common.h
@@ -364,8 +364,8 @@ struct fm_event_msg_hdr {
 #define FM_TX_ANT_IMP_500		2
 
 /* Functions exported by FM common sub-module */
-int fmc_prepare(struct fmdev *);
-int fmc_release(struct fmdev *);
+void fmc_prepare(struct fmdev *);
+void fmc_release(struct fmdev *);
 
 void fmc_update_region_info(struct fmdev *, u8);
 int fmc_send_cmd(struct fmdev *, u8, u16,
diff --git a/drivers/media/radio/wl128x/fmdrv_v4l2.c b/drivers/media/radio/wl128x/fmdrv_v4l2.c
index affa9e199dfb..ab6384e412f9 100644
--- a/drivers/media/radio/wl128x/fmdrv_v4l2.c
+++ b/drivers/media/radio/wl128x/fmdrv_v4l2.c
@@ -133,11 +133,7 @@ static int fm_v4l2_fops_open(struct file *file)
 
 	if (mutex_lock_interruptible(&fmdev->mutex))
 		return -ERESTARTSYS;
-	ret = fmc_prepare(fmdev);
-	if (ret < 0) {
-		fmerr("Unable to prepare FM CORE\n");
-		goto open_unlock;
-	}
+	fmc_prepare(fmdev);
 
 	fmdbg("Load FM RX firmware..\n");
 
@@ -171,11 +167,7 @@ static int fm_v4l2_fops_release(struct file *file)
 		goto release_unlock;
 	}
 
-	ret = fmc_release(fmdev);
-	if (ret < 0) {
-		fmerr("FM CORE release failed\n");
-		goto release_unlock;
-	}
+	fmc_release(fmdev);
 	fmdev->radio_disconnected = 0;
 
 release_unlock:
-- 
2.19.2


  parent reply	other threads:[~2018-12-21  1:18 UTC|newest]

Thread overview: 50+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-12-21  1:17 [PATCH 00/14] Add support for FM radio in hcill and kill TI_ST Sebastian Reichel
2018-12-21  1:17 ` [PATCH 01/14] ARM: dts: LogicPD Torpedo: Add WiLink UART node Sebastian Reichel
2018-12-21 20:05   ` Adam Ford
2018-12-21  1:17 ` [PATCH 02/14] ARM: dts: IGEP: " Sebastian Reichel
2019-02-18 22:04   ` Enric Balletbo Serra
2018-12-21  1:17 ` [PATCH 03/14] ARM: OMAP2+: pdata-quirks: drop TI_ST/KIM support Sebastian Reichel
2018-12-21  1:17 ` [PATCH 04/14] media: wl128x-radio: remove module version Sebastian Reichel
2018-12-21  1:17 ` [PATCH 05/14] media: wl128x-radio: remove global radio_disconnected Sebastian Reichel
2018-12-22 19:10   ` Pavel Machek
2018-12-21  1:17 ` [PATCH 06/14] media: wl128x-radio: remove global radio_dev Sebastian Reichel
2018-12-22 19:16   ` Pavel Machek
2018-12-21  1:17 ` [PATCH 07/14] media: wl128x-radio: convert to platform device Sebastian Reichel
2018-12-22 19:17   ` Pavel Machek
2018-12-21  1:17 ` [PATCH 08/14] media: wl128x-radio: use device managed memory allocation Sebastian Reichel
2018-12-22 19:20   ` Pavel Machek
2018-12-21  1:17 ` [PATCH 09/14] media: wl128x-radio: load firmware from ti-connectivity/ Sebastian Reichel
2018-12-21  1:17 ` Sebastian Reichel [this message]
2018-12-22 19:29   ` [PATCH 10/14] media: wl128x-radio: simplify fmc_prepare/fmc_release Pavel Machek
2019-01-09 18:17     ` Sebastian Reichel
2018-12-21  1:17 ` [PATCH 11/14] media: wl128x-radio: fix skb debug printing Sebastian Reichel
2018-12-22 19:30   ` Pavel Machek
2018-12-21  1:17 ` [PATCH 12/14] media: wl128x-radio: move from TI_ST to hci_ll driver Sebastian Reichel
2018-12-23 15:56   ` Marcel Holtmann
2019-01-09 18:11     ` Sebastian Reichel
2019-01-09 19:24       ` Marcel Holtmann
2019-01-10  1:23         ` Rob Herring
2018-12-21  1:17 ` [PATCH 13/14] Bluetooth: btwilink: drop superseded driver Sebastian Reichel
2018-12-21  1:17 ` [PATCH 14/14] misc: ti-st: Drop " Sebastian Reichel
2018-12-21 21:10   ` Adam Ford
2018-12-22  3:00     ` Sebastian Reichel
2018-12-22 13:17       ` Adam Ford
2018-12-21 18:02 ` [PATCH 00/14] Add support for FM radio in hcill and kill TI_ST Tony Lindgren
2018-12-22  2:47   ` Sebastian Reichel
2018-12-23 16:15     ` Tony Lindgren
2018-12-22 20:36   ` Adam Ford
2018-12-23 16:22     ` Tony Lindgren
2018-12-22 20:08 ` Pavel Machek
2018-12-22 22:40   ` Pavel Machek
2019-01-10 17:42   ` Sebastian Reichel
2019-03-14  8:20 ` Hans Verkuil
2019-03-14 12:18   ` Adam Ford
2019-03-19 13:31   ` Sebastian Reichel
2019-05-07 17:26     ` Adam Ford
2019-05-07 18:34       ` Adam Ford
2019-05-08 20:58         ` Marcel Holtmann
2019-05-10 13:28           ` Adam Ford
2019-05-10 15:38             ` Marcel Holtmann
2019-09-30 23:42               ` Adam Ford
2019-10-02 19:03     ` Adam Ford
2019-10-03 13:42       ` Sebastian Reichel

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20181221011752.25627-11-sre@kernel.org \
    --to=sre@kernel.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=linux-bluetooth@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=marcel@holtmann.org \
    --cc=mchehab@kernel.org \
    --cc=pavel@ucw.cz \
    --cc=robh@kernel.org \
    --cc=sebastian.reichel@collabora.com \
    --cc=tony@atomide.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).