From: Yong Wu <yong.wu@mediatek.com>
To: Joerg Roedel <joro@8bytes.org>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Matthias Brugger <matthias.bgg@gmail.com>,
Rob Herring <robh+dt@kernel.org>
Cc: Robin Murphy <robin.murphy@arm.com>,
Tomasz Figa <tfiga@google.com>, Will Deacon <will.deacon@arm.com>,
<linux-mediatek@lists.infradead.org>,
<srv_heupstream@mediatek.com>, <devicetree@vger.kernel.org>,
<linux-kernel@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<iommu@lists.linux-foundation.org>, <arnd@arndb.de>,
<yingjoe.chen@mediatek.com>, <yong.wu@mediatek.com>,
<youlin.pei@mediatek.com>,
Nicolas Boichat <drinkcat@chromium.org>
Subject: [PATCH 01/13] dt-binding: mediatek: Get rid of mediatek,larb for multimedia HW
Date: Tue, 1 Jan 2019 12:51:04 +0800 [thread overview]
Message-ID: <1546318276-18993-2-git-send-email-yong.wu@mediatek.com> (raw)
In-Reply-To: <1546318276-18993-1-git-send-email-yong.wu@mediatek.com>
After adding device_link between the consumer with the smi-larbs,
if the consumer call its owner pm_runtime_get(_sync), the
pm_runtime_get(_sync) of smi-larb and smi-common will be called
automatically. Thus, the consumer don't need the property.
And IOMMU also know which larb this consumer connects with from
iommu id in the "iommus=" property.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
---
I guess it should go through Matthias's tree if the patch is ok,
thus I don't separate to different patches. If it's really needed,
please feel free to tell me.
---
.../devicetree/bindings/display/mediatek/mediatek,disp.txt | 9 ---------
.../devicetree/bindings/media/mediatek-jpeg-decoder.txt | 4 ----
Documentation/devicetree/bindings/media/mediatek-mdp.txt | 8 --------
Documentation/devicetree/bindings/media/mediatek-vcodec.txt | 4 ----
4 files changed, 25 deletions(-)
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt b/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt
index 8469de5..464b92f 100644
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt
@@ -56,8 +56,6 @@ Required properties (DMA function blocks):
"mediatek,<chip>-disp-rdma"
"mediatek,<chip>-disp-wdma"
the supported chips are mt2701 and mt8173.
-- larb: Should contain a phandle pointing to the local arbiter device as defined
- in Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt
- iommus: Should point to the respective IOMMU block with master port as
argument, see Documentation/devicetree/bindings/iommu/mediatek,iommu.txt
for details.
@@ -78,7 +76,6 @@ ovl0: ovl@1400c000 {
power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
clocks = <&mmsys CLK_MM_DISP_OVL0>;
iommus = <&iommu M4U_PORT_DISP_OVL0>;
- mediatek,larb = <&larb0>;
};
ovl1: ovl@1400d000 {
@@ -88,7 +85,6 @@ ovl1: ovl@1400d000 {
power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
clocks = <&mmsys CLK_MM_DISP_OVL1>;
iommus = <&iommu M4U_PORT_DISP_OVL1>;
- mediatek,larb = <&larb4>;
};
rdma0: rdma@1400e000 {
@@ -98,7 +94,6 @@ rdma0: rdma@1400e000 {
power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
clocks = <&mmsys CLK_MM_DISP_RDMA0>;
iommus = <&iommu M4U_PORT_DISP_RDMA0>;
- mediatek,larb = <&larb0>;
};
rdma1: rdma@1400f000 {
@@ -108,7 +103,6 @@ rdma1: rdma@1400f000 {
power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
clocks = <&mmsys CLK_MM_DISP_RDMA1>;
iommus = <&iommu M4U_PORT_DISP_RDMA1>;
- mediatek,larb = <&larb4>;
};
rdma2: rdma@14010000 {
@@ -118,7 +112,6 @@ rdma2: rdma@14010000 {
power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
clocks = <&mmsys CLK_MM_DISP_RDMA2>;
iommus = <&iommu M4U_PORT_DISP_RDMA2>;
- mediatek,larb = <&larb4>;
};
wdma0: wdma@14011000 {
@@ -128,7 +121,6 @@ wdma0: wdma@14011000 {
power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
clocks = <&mmsys CLK_MM_DISP_WDMA0>;
iommus = <&iommu M4U_PORT_DISP_WDMA0>;
- mediatek,larb = <&larb0>;
};
wdma1: wdma@14012000 {
@@ -138,7 +130,6 @@ wdma1: wdma@14012000 {
power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
clocks = <&mmsys CLK_MM_DISP_WDMA1>;
iommus = <&iommu M4U_PORT_DISP_WDMA1>;
- mediatek,larb = <&larb4>;
};
color0: color@14013000 {
diff --git a/Documentation/devicetree/bindings/media/mediatek-jpeg-decoder.txt b/Documentation/devicetree/bindings/media/mediatek-jpeg-decoder.txt
index 044b119..7978f21 100644
--- a/Documentation/devicetree/bindings/media/mediatek-jpeg-decoder.txt
+++ b/Documentation/devicetree/bindings/media/mediatek-jpeg-decoder.txt
@@ -15,9 +15,6 @@ Required properties:
- clock-names: must contain "jpgdec-smi" and "jpgdec".
- power-domains: a phandle to the power domain, see
Documentation/devicetree/bindings/power/power_domain.txt for details.
-- mediatek,larb: must contain the local arbiters in the current Socs, see
- Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt
- for details.
- iommus: should point to the respective IOMMU block with master port as
argument, see Documentation/devicetree/bindings/iommu/mediatek,iommu.txt
for details.
@@ -32,7 +29,6 @@ Example:
clock-names = "jpgdec-smi",
"jpgdec";
power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>;
- mediatek,larb = <&larb2>;
iommus = <&iommu MT2701_M4U_PORT_JPGDEC_WDMA>,
<&iommu MT2701_M4U_PORT_JPGDEC_BSDMA>;
};
diff --git a/Documentation/devicetree/bindings/media/mediatek-mdp.txt b/Documentation/devicetree/bindings/media/mediatek-mdp.txt
index 0d03e3a..df69c5a 100644
--- a/Documentation/devicetree/bindings/media/mediatek-mdp.txt
+++ b/Documentation/devicetree/bindings/media/mediatek-mdp.txt
@@ -27,9 +27,6 @@ Required properties (DMA function blocks, child node):
- iommus: should point to the respective IOMMU block with master port as
argument, see Documentation/devicetree/bindings/iommu/mediatek,iommu.txt
for details.
-- mediatek,larb: must contain the local arbiters in the current Socs, see
- Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt
- for details.
Example:
mdp_rdma0: rdma@14001000 {
@@ -40,7 +37,6 @@ Example:
<&mmsys CLK_MM_MUTEX_32K>;
power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
iommus = <&iommu M4U_PORT_MDP_RDMA0>;
- mediatek,larb = <&larb0>;
mediatek,vpu = <&vpu>;
};
@@ -51,7 +47,6 @@ Example:
<&mmsys CLK_MM_MUTEX_32K>;
power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
iommus = <&iommu M4U_PORT_MDP_RDMA1>;
- mediatek,larb = <&larb4>;
};
mdp_rsz0: rsz@14003000 {
@@ -81,7 +76,6 @@ Example:
clocks = <&mmsys CLK_MM_MDP_WDMA>;
power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
iommus = <&iommu M4U_PORT_MDP_WDMA>;
- mediatek,larb = <&larb0>;
};
mdp_wrot0: wrot@14007000 {
@@ -90,7 +84,6 @@ Example:
clocks = <&mmsys CLK_MM_MDP_WROT0>;
power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
iommus = <&iommu M4U_PORT_MDP_WROT0>;
- mediatek,larb = <&larb0>;
};
mdp_wrot1: wrot@14008000 {
@@ -99,5 +92,4 @@ Example:
clocks = <&mmsys CLK_MM_MDP_WROT1>;
power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
iommus = <&iommu M4U_PORT_MDP_WROT1>;
- mediatek,larb = <&larb4>;
};
diff --git a/Documentation/devicetree/bindings/media/mediatek-vcodec.txt b/Documentation/devicetree/bindings/media/mediatek-vcodec.txt
index 2a615d8..a5d82a7 100644
--- a/Documentation/devicetree/bindings/media/mediatek-vcodec.txt
+++ b/Documentation/devicetree/bindings/media/mediatek-vcodec.txt
@@ -9,7 +9,6 @@ Required properties:
- reg : Physical base address of the video codec registers and length of
memory mapped region.
- interrupts : interrupt number to the cpu.
-- mediatek,larb : must contain the local arbiters in the current Socs.
- clocks : list of clock specifiers, corresponding to entries in
the clock-names property.
- clock-names: encoder must contain "venc_sel_src", "venc_sel",,
@@ -39,7 +38,6 @@ vcodec_dec: vcodec@16000000 {
<0 0x16027800 0 0x800>, /*VP8_VL*/
<0 0x16028400 0 0x400>; /*VP9_VD*/
interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_LOW>;
- mediatek,larb = <&larb1>;
iommus = <&iommu M4U_PORT_HW_VDEC_MC_EXT>,
<&iommu M4U_PORT_HW_VDEC_PP_EXT>,
<&iommu M4U_PORT_HW_VDEC_AVC_MV_EXT>,
@@ -74,8 +72,6 @@ vcodec_dec: vcodec@16000000 {
<0 0x19002000 0 0x1000>; /*VENC_LT_SYS*/
interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_LOW>,
<GIC_SPI 202 IRQ_TYPE_LEVEL_LOW>;
- mediatek,larb = <&larb3>,
- <&larb5>;
iommus = <&iommu M4U_PORT_VENC_RCPU>,
<&iommu M4U_PORT_VENC_REC>,
<&iommu M4U_PORT_VENC_BSDMA>,
--
1.9.1
next prev parent reply other threads:[~2019-01-01 4:52 UTC|newest]
Thread overview: 42+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-01-01 4:51 [PATCH 00/13] Clean up "mediatek,larb" after adding device_link Yong Wu
2019-01-01 4:51 ` Yong Wu [this message]
2019-01-11 14:58 ` [PATCH 01/13] dt-binding: mediatek: Get rid of mediatek,larb for multimedia HW Rob Herring
2019-02-25 23:54 ` Evan Green
2019-01-01 4:51 ` [PATCH 02/13] driver core: Remove the link if there is no driver with AUTO flag Yong Wu
2019-02-25 23:53 ` Evan Green
2019-02-27 14:33 ` Yong Wu
2019-03-05 19:03 ` Evan Green
2019-03-12 14:21 ` Matthias Brugger
2019-03-12 23:17 ` Evan Green
2019-03-13 9:08 ` Yong Wu
2019-01-01 4:51 ` [PATCH 03/13] iommu/mediatek: Add probe_defer for smi-larb Yong Wu
2019-02-25 23:54 ` Evan Green
2019-02-27 14:33 ` Yong Wu
2019-03-05 19:02 ` Evan Green
2019-01-01 4:51 ` [PATCH 04/13] iommu/mediatek: Add device_link between the consumer and the larb devices Yong Wu
2019-02-25 23:54 ` Evan Green
2019-02-27 14:34 ` Yong Wu
2019-02-27 19:30 ` Robin Murphy
2019-03-13 9:11 ` Yong Wu
2019-01-01 4:51 ` [PATCH 05/13] memory: mtk-smi: Add device-link between smi-larb and smi-common Yong Wu
2019-02-25 23:54 ` Evan Green
2019-02-27 14:33 ` Yong Wu
2019-03-05 19:02 ` Evan Green
2019-01-01 4:51 ` [PATCH 06/13] media: mtk-jpeg: Get rid of mtk_smi_larb_get/put Yong Wu
2019-02-25 23:55 ` Evan Green
2019-01-01 4:51 ` [PATCH 07/13] media: mtk-mdp: " Yong Wu
2019-02-25 23:55 ` Evan Green
2019-01-01 4:51 ` [PATCH 08/13] media: mtk-vcodec: " Yong Wu
2019-02-25 23:55 ` Evan Green
2019-01-01 4:51 ` [PATCH 09/13] drm/mediatek: " Yong Wu
2019-02-25 23:55 ` Evan Green
2019-01-01 4:51 ` [PATCH 10/13] memory: mtk-smi: " Yong Wu
2019-02-25 23:56 ` Evan Green
2019-01-01 4:51 ` [PATCH 11/13] iommu/mediatek: Use builtin_platform_driver Yong Wu
2019-02-25 23:56 ` Evan Green
2019-02-27 14:33 ` Yong Wu
2019-03-05 19:03 ` Evan Green
2019-01-01 4:51 ` [PATCH 12/13] arm: dts: mediatek: Get rid of mediatek,larb for MM nodes Yong Wu
2019-02-25 23:56 ` Evan Green
2019-01-01 4:51 ` [PATCH 13/13] arm64: " Yong Wu
2019-02-25 23:56 ` Evan Green
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1546318276-18993-2-git-send-email-yong.wu@mediatek.com \
--to=yong.wu@mediatek.com \
--cc=arnd@arndb.de \
--cc=devicetree@vger.kernel.org \
--cc=drinkcat@chromium.org \
--cc=gregkh@linuxfoundation.org \
--cc=iommu@lists.linux-foundation.org \
--cc=joro@8bytes.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=matthias.bgg@gmail.com \
--cc=robh+dt@kernel.org \
--cc=robin.murphy@arm.com \
--cc=srv_heupstream@mediatek.com \
--cc=tfiga@google.com \
--cc=will.deacon@arm.com \
--cc=yingjoe.chen@mediatek.com \
--cc=youlin.pei@mediatek.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).