linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Bjorn Andersson <bjorn.andersson@linaro.org>
To: Andy Gross <andy.gross@linaro.org>,
	David Brown <david.brown@linaro.org>,
	Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>
Cc: Russell King <linux@armlinux.org.uk>,
	Ulf Hansson <ulf.hansson@linaro.org>,
	Arun Kumar Neelakantam <aneela@codeaurora.org>,
	linux-arm-msm@vger.kernel.org, linux-soc@vger.kernel.org,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH v2 1/7] dt-bindings: soc: qcom: Add AOSS QMP binding
Date: Sun,  6 Jan 2019 00:09:09 -0800	[thread overview]
Message-ID: <20190106080915.4493-2-bjorn.andersson@linaro.org> (raw)
In-Reply-To: <20190106080915.4493-1-bjorn.andersson@linaro.org>

Add binding for the QMP based side-channel communication mechanism to
the AOSS, which is used to control resources not exposed through the
RPMh interface.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
---

Changes since v1:
- Don't describe power-domain as a separate child node

 .../bindings/soc/qcom/qcom,aoss-qmp.txt       | 57 +++++++++++++++++++
 include/dt-bindings/power/qcom-aoss-qmp.h     | 15 +++++
 2 files changed, 72 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.txt
 create mode 100644 include/dt-bindings/power/qcom-aoss-qmp.h

diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.txt
new file mode 100644
index 000000000000..9b0d9785efe0
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.txt
@@ -0,0 +1,57 @@
+Qualcomm Always-On Subsystem side channel binding
+
+This binding describes the hardware component responsible for side channel
+requests to the always-on subsystem (AOSS), used for certain power management
+requests that is not handled by the standard RPMh interface. Each client in the
+SoC has it's own block of message RAM and IRQ for communication with the AOSS.
+The protocol used to communicate in the message RAM is known as QMP.
+
+The AOSS side channel exposes control over a set of resources, used to control
+a set of debug related clocks and to affect the low power state of resources
+related to the secondary subsystems. These resources are exposed as a set of
+power-domains.
+
+- compatible:
+	Usage: required
+	Value type: <string>
+	Definition: must be "qcom,sdm845-aoss-qmp"
+
+- reg:
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: the base address and size of the message RAM for this
+		    client's communication with the AOSS
+
+- interrupts:
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: should specify the AOSS message IRQ for this client
+
+- mboxes:
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: reference to the mailbox representing the outgoing doorbell
+		    in APCS for this client, as described in mailbox/mailbox.txt
+
+- #power-domain-cells:
+	Usage: optional
+	Value type: <u32>
+	Definition: must be 1
+		    The provided power-domains are:
+		    QDSS clock-domain (0), CDSP state (1), LPASS state (2),
+		    modem state (3), SLPI state (4), SPSS state (5) and Venus
+		    state (6).
+
+= EXAMPLE
+
+The following example represents the AOSS side-channel message RAM and the
+mechanism exposing the power-domains, as found in SDM845.
+
+  aoss_qmp: qmp@c300000 {
+          compatible = "qcom,sdm845-aoss-qmp";
+          reg = <0x0c300000 0x100000>;
+          interrupts = <GIC_SPI 389 IRQ_TYPE_EDGE_RISING>;
+          mboxes = <&apss_shared 0>;
+
+	  #power-domain-cells = <1>;
+  };
diff --git a/include/dt-bindings/power/qcom-aoss-qmp.h b/include/dt-bindings/power/qcom-aoss-qmp.h
new file mode 100644
index 000000000000..7d8ac1a4f90c
--- /dev/null
+++ b/include/dt-bindings/power/qcom-aoss-qmp.h
@@ -0,0 +1,15 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/* Copyright (c) 2018, Linaro Ltd. */
+
+#ifndef __DT_BINDINGS_POWER_QCOM_AOSS_QMP_H
+#define __DT_BINDINGS_POWER_QCOM_AOSS_QMP_H
+
+#define AOSS_QMP_QDSS_CLK	0
+#define AOSS_QMP_LS_CDSP		1
+#define AOSS_QMP_LS_LPASS	2
+#define AOSS_QMP_LS_MODEM	3
+#define AOSS_QMP_LS_SLPI		4
+#define AOSS_QMP_LS_SPSS		5
+#define AOSS_QMP_LS_VENUS	6
+
+#endif
-- 
2.18.0


  reply	other threads:[~2019-01-06  8:10 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-01-06  8:09 [PATCH v2 0/7] Qualcomm AOSS QMP side channel binding and driver Bjorn Andersson
2019-01-06  8:09 ` Bjorn Andersson [this message]
2019-01-11 22:10   ` [PATCH v2 1/7] dt-bindings: soc: qcom: Add AOSS QMP binding Rob Herring
2019-01-14 22:30   ` Stephen Boyd
2019-01-06  8:09 ` [PATCH v2 2/7] soc: qcom: Add AOSS QMP communication driver Bjorn Andersson
2019-01-10 12:48   ` Arun Kumar Neelakantam
2019-01-14 22:36   ` Stephen Boyd
2019-01-14 23:20     ` Bjorn Andersson
2019-01-06  8:09 ` [PATCH v2 3/7] soc: qcom: Add AOSS QMP genpd provider Bjorn Andersson
2019-01-10  4:59   ` Sai Prakash Ranjan
2019-01-14 22:40   ` Stephen Boyd
2019-01-14 23:29     ` Bjorn Andersson
2019-01-06  8:09 ` [PATCH v2 4/7] remoteproc: q6v5-mss: Vote for rpmh power domains Bjorn Andersson
2019-01-09 14:39   ` Sibi Sankar
2019-01-06  8:09 ` [PATCH v2 5/7] remoteproc: q6v5-mss: Active powerdomain for SDM845 Bjorn Andersson
2019-01-09 14:40   ` Sibi Sankar
2019-01-06  8:09 ` [PATCH v2 6/7] amba: Allow pclk to be controlled by power domain Bjorn Andersson
2019-01-06  8:09 ` [(RFC) PATCH v2 7/7] soc: qcom: aoss-qmp: Add cooling device support Bjorn Andersson
2019-01-11 22:11   ` Rob Herring

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190106080915.4493-2-bjorn.andersson@linaro.org \
    --to=bjorn.andersson@linaro.org \
    --cc=andy.gross@linaro.org \
    --cc=aneela@codeaurora.org \
    --cc=david.brown@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-soc@vger.kernel.org \
    --cc=linux@armlinux.org.uk \
    --cc=mark.rutland@arm.com \
    --cc=robh+dt@kernel.org \
    --cc=ulf.hansson@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).