From: Shunyong Yang <shunyong.yang@hxt-semitech.com>
To: <vkoul@kernel.org>
Cc: <okaya@kernel.org>, <andy.gross@linaro.org>,
<david.brown@linaro.org>, <dan.j.williams@intel.com>,
<dmaengine@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
Shunyong Yang <shunyong.yang@hxt-semitech.com>,
Joey Zheng <yu.zheng@hxt-semitech.com>
Subject: [PATCH v2 2/2] dmaengine: qcom_hidma: assign channel cookie correctly
Date: Mon, 7 Jan 2019 09:34:02 +0800 [thread overview]
Message-ID: <9e49721af4f2aee61045e755cc3359d192c9a75a.1546823811.git.shunyong.yang@hxt-semitech.com> (raw)
In-Reply-To: <8109d1ab70fe6dbacdbe89fda38d8dcb450c884c.1546823811.git.shunyong.yang@hxt-semitech.com>
When dma_cookie_complete() is called in hidma_process_completed(),
dma_cookie_status() will return DMA_COMPLETE in hidma_tx_status(). Then,
hidma_txn_is_success() will be called to use channel cookie
mchan->last_success to do additional DMA status check. Current code
assigns mchan->last_success after dma_cookie_complete(). This causes
a race condition of dma_cookie_status() returns DMA_COMPLETE before
mchan->last_success is assigned correctly. The race will cause
hidma_tx_status() return DMA_ERROR but the transaction is actually a
success. Moreover, in async_tx case, it will cause a timeout panic
in async_tx_quiesce().
Kernel panic - not syncing: async_tx_quiesce: DMA error waiting for
transaction
...
Call trace:
[<ffff000008089994>] dump_backtrace+0x0/0x1f4
[<ffff000008089bac>] show_stack+0x24/0x2c
[<ffff00000891e198>] dump_stack+0x84/0xa8
[<ffff0000080da544>] panic+0x12c/0x29c
[<ffff0000045d0334>] async_tx_quiesce+0xa4/0xc8 [async_tx]
[<ffff0000045d03c8>] async_trigger_callback+0x70/0x1c0 [async_tx]
[<ffff0000048b7d74>] raid_run_ops+0x86c/0x1540 [raid456]
[<ffff0000048bd084>] handle_stripe+0x5e8/0x1c7c [raid456]
[<ffff0000048be9ec>] handle_active_stripes.isra.45+0x2d4/0x550 [raid456]
[<ffff0000048beff4>] raid5d+0x38c/0x5d0 [raid456]
[<ffff000008736538>] md_thread+0x108/0x168
[<ffff0000080fb1cc>] kthread+0x10c/0x138
[<ffff000008084d34>] ret_from_fork+0x10/0x18
Cc: Joey Zheng <yu.zheng@hxt-semitech.com>
Reviewed-by: Sinan Kaya <okaya@kernel.org>
Signed-off-by: Shunyong Yang <shunyong.yang@hxt-semitech.com>
---
v2:
fix missing brace according to Vinod's feedback.
add Reviewed-by: Sinan Kaya <okaya@kernel.org>.
---
drivers/dma/qcom/hidma.c | 17 +++++++++--------
1 file changed, 9 insertions(+), 8 deletions(-)
diff --git a/drivers/dma/qcom/hidma.c b/drivers/dma/qcom/hidma.c
index 9d639ed1955a..411f91fde734 100644
--- a/drivers/dma/qcom/hidma.c
+++ b/drivers/dma/qcom/hidma.c
@@ -138,24 +138,25 @@ static void hidma_process_completed(struct hidma_chan *mchan)
desc = &mdesc->desc;
last_cookie = desc->cookie;
+ llstat = hidma_ll_status(mdma->lldev, mdesc->tre_ch);
+
spin_lock_irqsave(&mchan->lock, irqflags);
+ if (llstat == DMA_COMPLETE) {
+ mchan->last_success = last_cookie;
+ result.result = DMA_TRANS_NOERROR;
+ } else {
+ result.result = DMA_TRANS_ABORTED;
+ }
+
dma_cookie_complete(desc);
spin_unlock_irqrestore(&mchan->lock, irqflags);
- llstat = hidma_ll_status(mdma->lldev, mdesc->tre_ch);
dmaengine_desc_get_callback(desc, &cb);
dma_run_dependencies(desc);
spin_lock_irqsave(&mchan->lock, irqflags);
list_move(&mdesc->node, &mchan->free);
-
- if (llstat == DMA_COMPLETE) {
- mchan->last_success = last_cookie;
- result.result = DMA_TRANS_NOERROR;
- } else
- result.result = DMA_TRANS_ABORTED;
-
spin_unlock_irqrestore(&mchan->lock, irqflags);
dmaengine_desc_callback_invoke(&cb, &result);
--
1.8.3.1
next prev parent reply other threads:[~2019-01-07 1:34 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-01-07 1:32 [PATCH v2 1/2] dmaengine: qcom_hidma: initialize tx flags in hidma_prep_dma_* Shunyong Yang
2019-01-07 1:34 ` Shunyong Yang [this message]
2019-01-20 5:14 ` Vinod Koul
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=9e49721af4f2aee61045e755cc3359d192c9a75a.1546823811.git.shunyong.yang@hxt-semitech.com \
--to=shunyong.yang@hxt-semitech.com \
--cc=andy.gross@linaro.org \
--cc=dan.j.williams@intel.com \
--cc=david.brown@linaro.org \
--cc=dmaengine@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=okaya@kernel.org \
--cc=vkoul@kernel.org \
--cc=yu.zheng@hxt-semitech.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).